210 8089888

XRAY

https://www.teamxray.com/

Sort Alphabetically: A to Z
96 Per Page
XRAY, PIVOT BALL UNIVERSAL 5.8 MM WITH HEX (4)
23.99 €
RX8 - 2011, T1FK - 2004, X1 - 2016, T2'008 - EU - 2008, X12 US - 2018, T4 - 2014, RX8 - 2016, X12 - 2012, NT1 - 2012, T3 - 2011, T3 - EU - 2010, NT1 EC - 2009, X1 - 2017, T2'007 - US - 2007, T4 - 2015, RX8 - 2013, X12 - 2014, NT1 - 2013, T3 - 2012, X1 - 2018, T3 - US - 2010, NT1 - 2017, T1FK'05 - 2005, T2 - 2006, T4 - 2016, NT1 PRO - 2012, X12 - 2015, NT1 - 2014, T2R PRO - 2009, X10 GT - 2015, T3R - 2010, NT1 - 2007, T2R - 2006, T1 EVO2 - 2002, T4 - 2017, NT1 WE - 2010, NT1 - 2015, X12 - 2016, RX8 - 2017, X10 GT - 2016, NT1 - 2009, T2'009 - EU - 2009, T1 EVO2 - 2003, T4 - 2018, NT1R - 2010, NT1 - 2016, X12 - 2017, T1 - 2001, X10 GT - 2018, NT1 - 2010, T2'008 - US - 2008, RX8 - 2012, T1 MINI, X1 - 2015, T2'007 - EU - 2007, X12 EU - 2018, T4 - 2013, RX8 - 2014, X10 LINK GT - 2010, NT1 - 2011, T2'009 - US - 2009, XRAY
Ball 5.8mm with hex cavity, for connection to molded composite ball joints. Set of four.
Out of stock
Out of stock Add to wish list Add to comparison list
XRAY, PUR® REINFORCED DRIVE BELT REAR 5.5 x 177 MM - V2
17.99 €
NT1 - 2013, NT1 PRO - 2012, NT1 - 2016, NT1 WE - 2010, NT1 - 2007, NT1 - 2009, NT1R - 2010, NT1 EC - 2009, NT1 - 2010, NT1 - 2012, NT1 - 2011, NT1 - 2015, NT1 - 2017, NT1 - 2014, XRAY
PUR® reinforced rear drive belt. 5 x 177mm. This belt is very thin and elastic as possible for an extremely efficient, low-friction drivetrain.
In stock
+ −
Add to wish list Add to comparison list
XRAY, PUR® REINFORCED DRIVE BELT SIDE 4.5 x 396 MM - V2
19.99 €
NT1 - 2017, NT1 - 2010, NT1 - 2016, NT1 - 2009, NT1 - 2015, NT1R - 2010, NT1 - 2007, NT1 - 2014, NT1 WE - 2010, NT1 - 2013, NT1 PRO - 2012, NT1 - 2012, NT1 EC - 2009, NT1 - 2011, XRAY
PUR® reinforced side drive belt. 4.5 x 396mm. This belt is very thin and elastic as possible for an extremely efficient, low-friction drivetrain.
In stock
+ −
Add to wish list Add to comparison list
XRAY, REAR ARM PIVOT PIN (2)
3.50 €
T2'009 - EU - 2009, T4 - 2016, T3 - EU - 2010, T2'009 - US - 2009, T4 - 2017, T3 - US - 2010, T2'008 - US - 2008, T4 - 2018, T2R PRO - 2009, T3R - 2010, T2 - 2006, T3 - 2011, T4 - 2013, T2'007 - EU - 2007, T3 - 2012, T4 - 2014, T2'007 - US - 2007, T2R - 2006, T4 - 2015, T2'008 - EU - 2008, XRAY
Rear lower outer pivot pins for XRAY T2, T3. Hardened for very high durability and long life. Set of two.
In stock
+ −
Add to wish list Add to comparison list
XRAY, REAR SUSPENSION ARM - HARD - 1-HOLE
9.99 €
T4 - 2017, T4 - 2018, T4 - 2016, T4 - 2015, T4 - 2014, XRAY
Molded composite rear lower suspension arm made from hard material. Fits T4’14. After extensive testing of many different composite mixtures, the...
In stock
+ −
Add to wish list Add to comparison list
XRAY, REAR TURNBUCKLE L/R 26 MM - HUDY SPRING STEEL (2)
8.90 €
T2R PRO - 2009, RX8 - 2013, T2'007 - EU - 2007, T4 - 2016, T2R - 2006, RX8 - 2012, T2 - 2006, T4 - 2017, T2'009 - US - 2009, RX8 - 2011, T3 - US - 2010, T1FK - 2004, T4 - 2018, T2'009 - EU - 2009, T3R - 2010, T3 - EU - 2010, T1 EVO2 - 2003, T2'008 - US - 2008, T4 - 2013, T3 - 2012, T1 EVO2 - 2002, T2'008 - EU - 2008, T4 - 2014, T3 - 2011, T1 - 2001, T2'007 - US - 2007, T4 - 2015, XRAY
Set of two adjustable turnbuckle for adjusting camber of rear uprights, manufactured from world-renowned top-secret "Hudy Spring Steel".
In stock
+ −
Add to wish list Add to comparison list
XRAY, SCREW FOR EXTERNAL DIFF ADJUSTMENT - HUDY SPRING STEEL™
1.90 €
T3 - 2011, T1 MINI, T2'007 - US - 2007, T2R PRO - 2009, T1 EVO2 - 2003, T2'007 - EU - 2007, T2R - 2006, T1 EVO2 - 2002, T3R - 2010, T2 - 2006, T2'009 - US - 2009, T1 - 2001, T3 - US - 2010, T1R, T2'009 - EU - 2009, T3 - EU - 2010, T1FK'05 - 2005, T2'008 - US - 2008, T3 - 2012, T1FK - 2004, T2'008 - EU - 2008, XRAY
Special screw for external diff adjustment. Manufactured exclusively by HUDY from world-renowned top-secret "Hudy Spring Steel".
In stock
+ −
Add to wish list Add to comparison list
XRAY, SCREW PHILLIPS SS 3.5x22 (10)
4.90 €
XB8 - 2017, XB9 - 2012, XB8 - 2015, XB8-EC - 2007, XB9 - 2013, XB808 - 2010, XB8-TQ - 2006, XB9E - 2013, GTX - 2017, XB808 - 2009, XB808 - 2008, XT8 - 2007, XB808E - 2010, XB8E - 2016, XB8 - 2016, XT8 - 2009, XB808 - 2011, XB8E - 2017, XB8 - 2005, XT8 - 2017, XB8E - 2015, XB8R, XB8 - 2014, XT9 - 2013, XRAY
M3.5x22 flat-head screw, self-tapping, Phillips drive. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, SERVO SAVER PLASTIC COVER - ECCENTRIC (2)
1.00 €
T2R - 2006, T1 - 2001, T2 - 2006, T2'009 - US - 2009, T1FK'05 - 2005, T2'009 - EU - 2009, T3R - 2010, T1FK - 2004, T2'008 - US - 2008, T3 - US - 2010, T1 MINI, T2'008 - EU - 2008, T3 - EU - 2010, T1 EVO2 - 2003, T2'007 - US - 2007, T2R PRO - 2009, T1 EVO2 - 2002, T2'007 - EU - 2007, XRAY
Set of two molded bearing holders with eccentric positions. Allows servo saver to be positioned according to steering servo mounting.
In stock
+ −
Add to wish list Add to comparison list
XRAY, SET OF ALU SHIM (0.5MM, 1.5MM, 2.5MM)
10.99 €
NT1 - 2007, T3 - 2012, X1 - 2015, RX8 - 2014, X12 - 2017, XB4 - 2018, NT1 - 2013, T2'008 - EU - 2008, X10 GT - 2018, NT1 PRO - 2012, T1FK - 2004, XB2 Dirt - 2017, NT1 - 2009, T3 - EU - 2010, X1 - 2016, RX8 - 2016, X12 EU - 2018, XB4 2WD- 2014, NT1 - 2014, T2'008 - US - 2008, X10 LINK GT - 2010, NT1 WE - 2010, T1FK'05 - 2005, XB4 - 2013, X1 - 2017, NT1 - 2010, T3 - US - 2010, RX8 - 2017, X12 US - 2018, XT2 - 2017, T4 - 2016, NT1 - 2015, T2'009 - EU - 2009, X12 - 2012, NT1R - 2010, T1R, XB4 - 2014, X1 - 2018, NT1 - 2011, T3R - 2010, T1 - 2001, XB2 Carpet - 2016, T4 - 2013, NT1 - 2016, T2'009 - US - 2009, RX8 - 2011, X12 - 2014, XB4 - 2015, T2 - 2006, X10 GT - 2009, T3 - 2011, T1 EVO2 - 2002, XB2 Carpet - 2017, T4 - 2014, T4 - 2017, NT1 EC - 2009, RX8 - 2012, X12 - 2015, XB4 - 2016, T2'007 - EU - 2007, X10 GT - 2015, T2R PRO - 2009, T1 EVO2 - 2003, XB2 Carpet - 2018, NT1 - 2017, T4 - 2015, T4 - 2018, RX8 - 2013, X12 - 2016, XB4 - 2017, NT1 - 2012, T2'007 - US - 2007, X10 GT - 2016, T2R - 2006, T1 MINI, XB2 Dirt - 2016, XRAY
Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:  • front and rear roll center   • front bump...
In stock
+ −
Add to wish list Add to comparison list
XRAY, SET OF BATTERY BACKSTOPS
2.90 €
T3 - EU - 2010, T2'007 - US - 2007, T2R PRO - 2009, T2'007 - EU - 2007, T2R - 2006, X10 LINK GT - 2010, T2 - 2006, T2'009 - US - 2009, X10 GT - 2009, T1FK'05 - 2005, T2'009 - EU - 2009, T3R - 2010, T2'008 - US - 2008, T3 - US - 2010, T2'008 - EU - 2008, XRAY
Set of six molded composite battery backstops for XRAY T1FK’05 and T2.
In stock
+ −
Add to wish list Add to comparison list
XRAY, SET OF ECCENTRIC COMPOSITE HUBS "1" FOR BULKHEADS (4+2)
1.90 €
T3 - 2011, T3 - 2012, T2'009 - EU - 2009, T3 - EU - 2010, T2'009 - US - 2009, T3 - US - 2010, T2R PRO - 2009, T3R - 2010, T2'008 - US - 2008, T2'008 - EU - 2008, XRAY
Set of 1mm-offset molded composite eccentric hubs support ball-bearings for differentials (4 hubs) and center layshaft (2 hubs). Fits XRAY T2’008,...
In stock
+ −
Add to wish list Add to comparison list
XRAY, SHOCK ABSORBER MEMBRANE - LOW (4)
12.99 €
RX8 - 2014, T2'008 - US - 2008, T1 EVO2 - 2003, T3 - 2012, T1 - 2001, T2'008 - EU - 2008, T1R, T3 - EU - 2010, NT1 - 2017, NT1 - 2016, T2 - 2006, T2'007 - EU - 2007, T3 - US - 2010, RX8 - 2016, T2'009 - US - 2009, NT1 - 2014, T1FK - 2004, T3R - 2010, T1 MINI, T2R - 2006, NT1 - 2015, T2'007 - US - 2007, X1 - 2015, T1FK'05 - 2005, T2R PRO - 2009, RX8 - 2017, T2'009 - EU - 2009, X1 - 2016, T1 EVO2 - 2002, T3 - 2011, XRAY
Silicon-rubber compensation membranes for shock absorbers. All-new low-profile shock membranes allow for easier shock rebound adjustment.  The new...
In stock
+ −
Add to wish list Add to comparison list
XRAY, SHOCK BALL JOINT - OPEN (4)
10.99 €
T4 - 2018, RX8 - 2014, NT1 - 2011, T3R - 2010, NT1 - 2017, T2R - 2006, X1 - 2015, RX8 - 2012, NT1 - 2010, T4 - 2013, NT1 - 2016, T2R PRO - 2009, X1 - 2016, RX8 - 2011, NT1 - 2009, T2'008 - EU - 2008, T4 - 2014, NT1 - 2015, T3 - 2011, X1 - 2017, NT1R - 2010, NT1 - 2007, T2'007 - US - 2007, T4 - 2015, NT1 - 2014, T3 - 2012, NT1 WE - 2010, T2'008 - US - 2008, T2'007 - EU - 2007, T4 - 2016, NT1 - 2013, T3 - EU - 2010, NT1 PRO - 2012, T2'009 - EU - 2009, T4 - 2017, T2 - 2006, NT1 - 2012, X1 - 2018, T3 - US - 2010, NT1 EC - 2009, T2'009 - US - 2009, XRAY
Molded composite ball joints for ends of XRAY T2, T3 shock shafts. Set of four.
In stock
+ −
Add to wish list Add to comparison list
XRAY, SHOCK CAP-NUT ALU (2) --- Replaced with #308352
1.90 €
T1 EVO2 - 2002, T1R, T1FK - 2004, T1 MINI, T1 EVO2 - 2003, T1FK'05 - 2005, XRAY
Set of two alu. nuts to close up the top pivot point of XRAY shock absorbers.
In stock
+ −
Add to wish list Add to comparison list
XRAY, SILICONE O-RING 3.4x2 (10)
9.99 €
XB9 - 2012, XB8 - 2016, XB808 - 2010, XB8E - 2017, XB808 - 2011, XB8E - 2016, XT9 - 2013, XB808E - 2010, XB808 - 2009, XT8 - 2017, GTX - 2017, XB8 - 2015, XB9E - 2013, XB808 - 2008, XB8 - 2014, XB9 - 2013, XB8 - 2017, XB8E - 2015, XRAY
Silicone O-ring fits over 3.5mm shaft. 2mm thick. Set of 10.
In stock
+ −
Add to wish list Add to comparison list
XRAY, SPRING FOR GEAR BOX - HARD (2)
5.99 €
NT1 - 2017, NT1 - 2011, NT1 - 2016, NT1 - 2010, NT1 - 2014, NT1R - 2010, NT1 - 2009, NT1 - 2015, NT1 WE - 2010, NT1 - 2007, RX8 - 2014, NT1 PRO - 2012, RX8 - 2016, NT1 - 2013, NT1 EC - 2009, RX8 - 2017, NT1 - 2012, XRAY
Harder springs for #335540 Composite 2-Speed Gear Box Set allows for higher 2nd gear engagement point. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY, SPRING-SET C=2.8 (2)
9.99 €
T2'009 - US - 2009, T3 - EU - 2010, T2'007 - EU - 2007, T2 - 2006, T3 - US - 2010, T1R, T1 MINI, T3R - 2010, T2'007 - US - 2007, T1 EVO2 - 2003, T1 EVO2 - 2002, X1 - 2015, T2'008 - EU - 2008, T1FK - 2004, T2R PRO - 2009, X1 - 2016, T2'008 - US - 2008, T1FK'05 - 2005, T2R - 2006, T2'009 - EU - 2009, T3 - 2012, T3 - 2011, XRAY
New ultimate-match shock springs (C = 2.8) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (2.8) on top spring coil for easy...
In stock
+ −
Add to wish list Add to comparison list
XRAY, SPRING-SET C=3.2 (2)
9.99 €
T2R PRO - 2009, T1 EVO2 - 2003, T2'007 - EU - 2007, T2R - 2006, T1 EVO2 - 2002, T2 - 2006, T2'009 - US - 2009, T3R - 2010, T3 - US - 2010, T1R, T2'009 - EU - 2009, X1 - 2015, T3 - 2012, T1FK'05 - 2005, T2'008 - US - 2008, X1 - 2016, T3 - EU - 2010, T1FK - 2004, T2'008 - EU - 2008, T3 - 2011, T1 MINI, T2'007 - US - 2007, XRAY
New ultimate-match shock springs (C = 3.2) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (3.2) on top spring coil for easy...
In stock
+ −
Add to wish list Add to comparison list
XRAY, SPRING-SET D=1.8 C=4.5 (4)
19.99 €
T3 - 2011, T2'007 - EU - 2007, T1 EVO2 - 2003, T2R - 2006, T2'007 - US - 2007, T1 MINI, T2'008 - EU - 2008, T3R - 2010, T3 - US - 2010, T1FK - 2004, T2'009 - US - 2009, T3 - EU - 2010, T1FK'05 - 2005, T2'009 - EU - 2009, T3 - 2012, T1R, T2'008 - US - 2008, T2R PRO - 2009, T2 - 2006, T1 EVO2 - 2002, XRAY
For even more fine tuning of suspension dampening, XRAY offers an additional ultra-fine tuning springs in addition to the basic XRAY springs. The ultra-fine...
In stock
+ −
Add to wish list Add to comparison list
XRAY, SPRING-SET D=1.9 (35 LB) LIGHT-RED (4)
4.90 €
T1 EVO2 - 2002, T3 - 2011, T2'007 - EU - 2007, T1 EVO2 - 2003, T3 - US - 2010, T2'007 - US - 2007, T1 MINI, T3R - 2010, T2R - 2006, T2'008 - EU - 2008, T1FK - 2004, T2'009 - US - 2009, T2R PRO - 2009, T1FK'05 - 2005, T2'009 - EU - 2009, T3 - EU - 2010, T1R, T2'008 - US - 2008, T3 - 2012, T2 - 2006, XRAY
For even more fine tuning of suspension dampening, XRAY offers an additional ultra-fine tuning springs in addition to the basic XRAY springs. The ultra-fine...
In stock
+ −
Add to wish list Add to comparison list
XRAY, STEEL SHIM FOR LOWER SUSP. HOLDER 3x7.5x0.4 (10)
7.99 €
T2'007 - US - 2007, T3 - 2011, T2'008 - EU - 2008, T2R PRO - 2009, T2 - 2006, T2'009 - US - 2009, T2R - 2006, T4 - 2013, T2'009 - EU - 2009, T3 - 2012, T3R - 2010, T2'008 - US - 2008, T3 - US - 2010, T2'007 - EU - 2007, T3 - EU - 2010, XRAY
Steel shims, 0.4mm thick, for track-width and rear toe adjustment on XRAY T2. Set of 10.
In stock
+ −
Add to wish list Add to comparison list
XRAY, STEEL SHIM FOR LOWER SUSP. HOLDER 3x7.5x1.15 (10)
2.99 €
T2'008 - US - 2008, T3 - 2012, T2'008 - EU - 2008, T2'007 - EU - 2007, T2'007 - US - 2007, T2'009 - US - 2009, T2R - 2006, T4 - 2013, T2R PRO - 2009, T3 - 2011, T3R - 2010, T2'009 - EU - 2009, T3 - US - 2010, T2 - 2006, T3 - EU - 2010, XRAY
Steel shims, 01.15mm thick, for track-width and rear toe adjustment on XRAY T2. Set of 10.
In stock
+ −
Add to wish list Add to comparison list
XRAY, STEEL STEERING BUSHING (2+2)
16.99 €
T4 - 2015, T2'008 - EU - 2008, T3 - 2011, RX8 - 2013, T4 - 2014, T2'007 - US - 2007, T2R PRO - 2009, RX8 - 2012, T4 - 2013, T2'007 - EU - 2007, XB4 2WD- 2014, T2R - 2006, RX8 - 2011, T3R - 2010, T2 - 2006, T4 - 2018, T2'009 - US - 2009, GTX - 2017, T3 - US - 2010, RX8 - 2017, T4 - 2017, T2'009 - EU - 2009, T3 - EU - 2010, RX8 - 2016, T4 - 2016, T2'008 - US - 2008, T3 - 2012, RX8 - 2014, XRAY
Precision-machined bushing for front C-hub steering block pivot screws on XRAY T2, T3. Includes 4 pieces: 2 short + 2 long.
In stock
+ −
Add to wish list Add to comparison list
XRAY, T2 SHOCK CAP-NUT ALU (2)
1.90 €
T2'007 - US - 2007, T2'007 - EU - 2007, NT1 - 2007, T2 - 2006, T2R - 2006, XRAY
Alu. shock cap nuts for top pivot of XRAY T2 shock absorbers. Set of two.
In stock
+ −
Add to wish list Add to comparison list
XRAY, T2'008|T2'009 FOAM-SPEC GRAPHITE PADS FOR LIPO - SET
10.90 €
T2R PRO - 2009, T2'008 - EU - 2008, T2'008 - US - 2008, T2'009 - EU - 2009, T2'009 - US - 2009, XRAY
The LiPo Conversion Set allows for the fitment of popular LiPo battery packs (with a height of 24.5mm or less) to XRAY T2'008 and T2'009 US Edition cars....
In stock
+ −
Add to wish list Add to comparison list
XRAY, T2'009 RUBBER-SPEC UPPER + REAR DECK 2.0MM GRAPHITE - SHORT- SET
10.90 €
T2R PRO - 2009, T2'009 - EU - 2009, XRAY
CNC-machined front and rear upper deck of premium-grade graphite material, specially designed and optimized for rubber-tire racing conditions with...
In stock
+ −
Add to wish list Add to comparison list
XRAY, T3 RUBBER-SPEC UPPER DECK 2.0MM GRAPHITE
22.99 €
T3 - EU - 2010, T3 - US - 2010, T3R - 2010, XRAY
CNC-machined upper deck of premium-grade 2.0mm thick graphite material, specially designed and optimized for rubber-tire racing conditions. This...
In stock
+ −
Add to wish list Add to comparison list
XRAY, T3 SHOCK TOWER REAR 3.0MM GRAPHITE
8.30 €
T3 - EU - 2010, T3 - 2011, T3 - US - 2010, T3R - 2010, XRAY
CNC-machined super-low rear shock tower made from 3.0mm thick premium graphite material to guarantee maximum strength and long life. Low height...
In stock
+ −
Add to wish list Add to comparison list
XRAY, T4 ALU SHOCK BODY (2)
7.90 €
T4 - 2014, T4 - 2013, X1 - 2017, X1 - 2018, T4 - 2018, T4 - 2017, T4 - 2016, T4 - 2015, XRAY
Machined hardcoated alu shock bodies for #308307 T4 Alu Shock Absorber - Set. Set of 2. Each aluminum shock body is CNC-machined from exclusive...
In stock
+ −
Add to wish list Add to comparison list
XRAY, T4 ANTI-ROLL BAR FRONT 1.4 MM
4.99 €
T4 - 2013, T4 - 2014, XRAY
The all-new T4 front anti-roll bar for narrowed front bulkheads for super-fine tuning. For easy recognition the anti-roll bar has laser-engraved stripes (to...
In stock
+ −
Add to wish list Add to comparison list
XRAY, T4 ANTI-ROLL BAR REAR 1.2 MM
2.10 €
T4 - 2013, T4 - 2014, XRAY
The T4 rear anti-roll bars for narrowed bulkheads for super-fine tuning. For easy recognition the anti-roll bars have laser-engraved stripes (to indicate bar...
In stock
+ −
Add to wish list Add to comparison list
XRAY, T4 ANTI-ROLL BAR REAR 1.4 MM
2.10 €
T4 - 2013, T4 - 2014, XRAY
The T4 rear anti-roll bars for narrowed bulkheads for super-fine tuning. For easy recognition the anti-roll bars have laser-engraved stripes (to indicate...
In stock
+ −
Add to wish list Add to comparison list
XRAY, T4 COMPOSITE ADJUSTMENT BALL-BEARING HUB (4)
4.90 €
T4 - 2018, T4 - 2013, T4 - 2015, T4 - 2014, T4 - 2016, T4 - 2017, XRAY
Molded composite adjustable ball-bearing hub. Set of 4
In stock
+ −
Add to wish list Add to comparison list
XRAY, T4'16 ALU MOTOR MOUNT PLATE - ORANGE
4.90 €
T4 - 2016, XRAY
Motor mount plate features new additional chassis flex adjustment positions.  The motor mount is part of the left layshaft bulkhead, eliminating...
In stock
+ −
Add to wish list Add to comparison list
XRAY, T4'17 GRAPHITE FLOATING SERVO HOLDER 3.0MM
8.70 €
T4 - 2017, T4 - 2018, XRAY
CNC-machined floating servo holder made from 3.0mm premium-grade graphite material. The all-new, unique floating servo holder is now standard in the...
In stock
+ −
Add to wish list Add to comparison list
XRAY, VENTILATED BRAKE DISC - LASER CUT - PRECISION-GROUND --- Replaced with #334112
3.90 €
NT1 WE - 2010, NT1 - 2010, NT1 EC - 2009, NT1 - 2009, NT1 - 2014, NT1 - 2013, NT1 PRO - 2012, NT1 - 2011, NT1 - 2007, NT1 - 2012, NT1R - 2010, XRAY
Laser-cut, heat-treated, precision-ground ventilated brake disk for NT1 ensures vibration-free operation.
In stock
+ −
Add to wish list Add to comparison list
XRAY, X1 COMPOSITE CASTER & CAMBER BUSHING (2+2+2+2)
4.99 €
X1 - 2017, X1 - 2016, X1 - 2015, X1 - 2018, XRAY
Composite eccentric bushings for adjusting caster and camber. Includes caster settings (3°, 6°, 9°, and 12°) and camber settings (1.0°, 1.5°, 2.0°, and 2.5°).
In stock
+ −
Add to wish list Add to comparison list
XRAY, X10 GRAPHITE 2.5MM FRONT BUMPER & SHIMS - V2
56.99 €
X10 LINK GT - 2010, X10 GT - 2016, X10 GT - 2015, X10 GT - 2009, X10 GT - 2018, XRAY
CNC-machined front lower bumper for XRAY X10 is custom-manufactured from heavy-duty 2.5mm high-grade graphite material for strength, lightness, and...
In stock
+ −
Add to wish list Add to comparison list
XRAY, XCA ALU 7075 T6 HARDCOATED PINION GEAR - 23T (2ND)
16.90 €
NT1 PRO - 2012, NT1 - 2007, NT1 - 2017, NT1 WE - 2010, NT1 - 2009, NT1 EC - 2009, NT1R - 2010, NT1 - 2015, NT1 - 2010, RX8 - 2014, NT1 - 2016, NT1 - 2011, NT1 - 2014, NT1 - 2012, NT1 - 2013, XRAY
High-strength 23T pinion gear (2nd gear) for the XRAY NT1 are made from tough 7075 T6 alu and specially hardcoated for supreme strength, light...
In stock
+ −
Add to wish list Add to comparison list
XRAY, XCA CLUTCHBELL - HIGH DYNAMIC - HUDY STEEL
34.90 €
NT1 - 2012, NT1 - 2016, NT1 - 2013, NT1 - 2015, NT1 - 2007, NT1 EC - 2009, NT1R - 2010, NT1 PRO - 2012, NT1 - 2009, NT1 WE - 2010, NT1 - 2010, NT1 - 2014, NT1 - 2011, NT1 - 2017, XRAY
High-dynamic clutchbell for the High-dynamic XCA Clutch Set features a smaller design. Made from ultra-strong HUDY Steel, the clutchbell has been...
In stock
+ −
Add to wish list Add to comparison list
XRAY, 305977 NARROW ALU PINION GEAR - HARD COATED 27T / 64
13.99 €
T1 EVO2 - 2003, T2R PRO - 2009, T4 - 2018, X12 EU - 2018, T1FK - 2004, T2'009 - EU - 2009, T4 - 2014, T1 MINI, T3 - 2011, X1 - 2016, X12 US - 2018, T1R, X12 - 2012, T4 - 2017, X12 - 2015, T3 - 2012, X1 - 2017, T4 - 2015, T2 - 2006, X10 LINK GT - 2010, X12 - 2014, X12 - 2016, T2'009 - US - 2009, X1 - 2018, T3 - US - 2010, T1FK'05 - 2005, X10 GT - 2009, X10 GT - 2015, T2R - 2006, T3 - EU - 2010, T3R - 2010, T1 - 2001, X10 GT - 2016, T2'007 - EU - 2007, T2'008 - EU - 2008, X1 - 2015, T1 EVO2 - 2002, T4 - 2013, X10 GT - 2018, X12 - 2017, T2'007 - US - 2007, T2'008 - US - 2008, T4 - 2016, XRAY
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the...
In stock
+ −
Add to wish list Add to comparison list
XRAY, 362290 STEEL STEERING BUSHING - SHORT (2)
9.99 €
XB4 - 2016, XB4 2WD- 2014, XB2 Dirt - 2017, XB2 Dirt - 2016, XT2 - 2017, XB2 Carpet - 2016, XB4 - 2013, XB2 Carpet - 2017, XB2 Carpet - 2018, XB4 - 2014, XB4 - 2017, XB4 - 2015, XB4 - 2018, XRAY
Precision-machined short bushing for front C-hub steering block pivot screws. These bushings are used also in composite servo saver arms and in composite...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ACTIVE DIFF LARGE BEVEL GEAR 41T
14.99 €
XB808 - 2008, XT8 - 2009, XB808E - 2010, XT8 - 2017, XT8 - 2007, XT9 - 2013, XB808 - 2011, XB808 - 2010, XB808 - 2009, XRAY
The 41T diff bevel gear for XRAY Active DiffT is machined from special HUDY steel material which has been specially developed for gear-type...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ADJ. TURNBUCKLE M4 L/R 52.5 MM - HUDY SPRING STEEL - V3 (2)
3.90 €
XB808 - 2008, XB8E - 2016, XB8 - 2017, XB8E - 2017, XB8 - 2016, XB808E - 2010, XB9 - 2012, XB8 - 2015, XB808 - 2011, XB8 - 2014, XB808 - 2010, GTX - 2017, XB808 - 2009, XB8E - 2015, XRAY
Adjustable left & right M4 turnbuckles manufactured from special HUDY Spring Steel™ material for turnbuckles, resulting in stronger turnbuckles with a...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ADJ. TURNBUCKLE M5 L/R 28 MM - HUDY SPRING STEEL (2)
3.50 €
XB8 - 2014, XB8 - 2015, XB8E - 2015, XRAY
Adjustable left & right M5 turnbuckles manufactured from special blend of HUDY Spring Steel™ which is specifically formulated for turnbuckles. These...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ADJ. TURNBUCKLE M5 L/R 58 MM - HUDY SPRING STEEL (2)
3.10 €
XB808 - 2009, XB9 - 2013, XB808 - 2008, XB9 - 2012, XB9E - 2013, XB808E - 2010, XB808 - 2010, XB808 - 2011, XRAY
Adjustable left & right M5 turnbuckles manufactured from special HUDY Spring Steel™ material for turnbuckles, resulting in stronger turnbuckles with a...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ADJ. TURNBUCKLE M5 L/R 64 MM - HUDY SPRING STEEL - V3 (2)
2.90 €
XB808 - 2009, XB9 - 2013, XB808 - 2008, XB9 - 2012, XB9E - 2013, XB808E - 2010, XB808 - 2011, XB808 - 2010, XRAY
Adjustable left & right M5 turnbuckles manufactured from special HUDY Spring Steel™ material for turnbuckles, resulting in stronger turnbuckles with a...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ADJUSTABLE TURNBUCKLE 37MM
2.90 €
M18 PRO LiPo, M18 PRO, M18, NT18, XRAY
Adjustable turnbuckle for steering.
In stock
+ −
Add to wish list Add to comparison list
XRAY, AIR FILTER BODY & CAP - LOW PROFILE - V2
9.99 €
XB8-TQ - 2006, XT8 - 2017, XB9 - 2013, XB808 - 2010, XT9 - 2013, XB9 - 2012, XT8 - 2007, XB808 - 2009, XB8 - 2014, XB8R, XB808 - 2008, GTX - 2017, XB808 - 2011, XB8 - 2017, XB8 - 2005, XB8 - 2016, XB8-EC - 2007, XT8 - 2009, XB8 - 2015, XRAY
Molded composite low-profile air filter base and cap.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU 7075 HEX SCREW M3x8 FOR REAR WHEELS (6)
11.99 €
X10 GT - 2016, X10 GT - 2015, X10 LINK GT - 2010, X12 US - 2018, X12 - 2014, X12 EU - 2018, X12 - 2017, X12 - 2015, X12 - 2016, X12 - 2012, X10 GT - 2018, X10 GT - 2009, XRAY
Lightweight and strong alu M3x8 socket-head cap screw, hex drive. Set of 6.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU ADJ. TURNBUCKLE 64MM M5 L/R - SWISS 7075 T6 (2)
8.99 €
XB9 - 2012, XB9 - 2013, XB808 - 2011, XB9E - 2013, XB808 - 2010, XB808 - 2009, XB808 - 2008, XB808E - 2010, XRAY
Adjustable left & right M5 steering turnbuckles manufactured from strong, lightweight 7075 T6 aluminum. Precision threading for fine toe adjustment....
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU DIFF PIN - HARD COATED (2)
2.30 €
XB9E - 2013, XB808 - 2010, XB8 - 2015, XT8 - 2007, XB808 - 2011, XB8 - 2016, XB8E - 2016, XB9 - 2012, XB8 - 2005, XB8-EC - 2007, XB8R, XT9 - 2013, XB8-TQ - 2006, XB8E - 2015, XT8 - 2009, XB808 - 2008, XB808E - 2010, XB9 - 2013, XB808 - 2009, XB8 - 2014, XRAY
Alu hardcoated pins for gear differential are CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long life....
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU ECCENTRIC BUSHING 0.0MM (2) --- Replaced with #372316-O
5.90 €
X10 GT - 2018, X10 GT - 2016, X12 EU - 2018, X10 GT - 2015, X12 - 2017, X12 - 2016, X12 US - 2018, X12 - 2015, X12 - 2014, XRAY
Smart eccentric aluminum inserts which allow quick and easy change and track-width set-up according to track conditions. Optional eccentric aluminum 0.5mm...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU ENGINE MOUNT (2)
15.90 €
RX8 - 2016, RX8 - 2017, XRAY
New engine mounts re-designed to be mounted to the chassis the same distance from the center of the chassis, and closer together for equal and improved flex...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU FRONT BODY POST - SWISS 7075 T6 (2)
13.40 €
RX8 - 2013, RX8 - 2012, RX8 - 2011, RX8 - 2014, XRAY
Alu front body posts for XRAY RX8 are CNC-machined from premium lightweight Swiss 7075 T6 aluminum. Alu body posts fit on composite or graphite holder. Set...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU FRONT CVD DRIVE AXLE - SWISS 7075 T6 - HARD COATED
9.99 €
RX8 - 2011, RX8 - 2017, RX8 - 2014, RX8 - 2013, RX8 - 2012, RX8 - 2016, XRAY
CNC-machined CVD drive axle for RX8 made from premium lightweight Swiss 7075 T6 hardcoated aluminum. Strategically-machined, super-lightweight drive axles...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU FRONT LOWER SUSP. HOLDER - REAR - 7075 T6 (5MM)
5.90 €
XT8 - 2009, XB8R, XB8-TQ - 2006, XB8-EC - 2007, XB8 - 2005, XT8 - 2007, XRAY
Front lower suspension holder for REAR of front bulkhead. Made from 5mm CNC-machined, highest-grade 7075 T6 aircraft aluminum. Xray stylish black finish...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU FRONT LOWER SUSP. HOLDER - REAR - FR - SWISS 7075 T6 - V2
7.99 €
XB808 - 2011, XT9 - 2013, XB8 - 2014, XB808 - 2010, GTX - 2017, XB808 - 2009, XB8E - 2017, XB9 - 2012, XB808 - 2008, XB8E - 2016, XB9 - 2013, XB8 - 2017, XB8E - 2015, XB9E - 2013, XB8 - 2016, XB808E - 2010, XT8 - 2017, XB8 - 2015, XRAY
Authentic XRAY alu front lower suspension holder for the REAR of the front bulkhead, CNC-machined from 7mm premium Swiss 7075 T6 aluminum, hardcoated for...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU LABYRINTH DUST COVER FOR CLUTCH BELL
1.80 €
XB808 - 2009, XB808 - 2008, XB808 - 2010, XB808 - 2011, XRAY
Machined aluminum Labyrinth Cover fits all XRAY clutch bells to prevent dirt from entering the clutch assembly. Especially effective when used with V2...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU MIDDLE SHAFT LOCATING COLLAR - LIGHTWEIGHT
4.90 €
RX8 - 2013, RX8 - 2011, RX8 - 2012, XRAY
Stylish-lightened alu locating collar made from tough 7076 T6 alu replaces the composite collar used on the front middle shaft.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU ONE-PIECE ENGINE MOUNT - SWISS 7075 T6 - HARD COATED
14.90 €
XB808 - 2010, XB808 - 2009, XT9 - 2013, XB808 - 2008, XT8 - 2009, XB9 - 2013, XB8 - 2014, XB9 - 2012, XB8 - 2015, XB808 - 2011, XRAY
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU REAR CVD DRIVE AXLE - SWISS 7075 T6 - HARD COATED
9.99 €
RX8 - 2011, RX8 - 2017, RX8 - 2014, RX8 - 2013, RX8 - 2012, RX8 - 2016, XRAY
CNC-machined CVD drive axle for RX8 made from premium lightweight Swiss 7075 T6 hardcoated aluminum. Strategically-machined, super-lightweight drive axles...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU REAR LOWER SUSP. ARM HOLDER - SWISS 7075 T6
14.99 €
RX8 - 2012, RX8 - 2011, RX8 - 2013, RX8 - 2014, XRAY
Alu lower suspension holder. Ultra-strong construction for increased lifespan and durability. CNC-machined from highest-grade Swiss 7075 T6 aluminum.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU REAR LOWER SUSP. HOLDER - FRONT - SQUARE ADJ. ROLL-CENTER
14.99 €
XB8 - 2017, XB808E - 2010, XB9E - 2013, XB808 - 2011, XB9 - 2012, XB808 - 2010, XB9 - 2013, XB808 - 2009, XB8E - 2017, XB808 - 2008, XT9 - 2013, XRAY
Authentic XRAY alu rear lower suspension holder for the FRONT of the rear bulkhead. CNC-machined from 7mm premium Swiss 7075 T6 aluminum, hardcoated for...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU REAR SHOCK BODY - HARD COATED (2)
6.40 €
XB9 - 2012, XT9 - 2013, XT8 - 2007, XB9E - 2013, XB9 - 2013, XT8 - 2009, XRAY
CNC-machined alu rear shock body for XB9, made from premium lightweight 7075 T6 aluminum. The big bore shock bodies are externally threaded with an...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU SHIM 3.2x4.8x0.5 (4)
5.20 €
X12 EU - 2018, X12 - 2015, X10 GT - 2015, X12 - 2016, X10 GT - 2016, X12 - 2017, X1 - 2015, X10 GT - 2018, X1 - 2016, X10 GT - 2009, X10 LINK GT - 2010, X1 - 2018, X12 US - 2018, X12 - 2012, X1 - 2017, X12 - 2014, XRAY
Front ride-height adjustment shims for XRAY XII for placement on steering kingpins. ID x OD x thickness = 3.2 x 4.8 x 0.5mm. Set of 4.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU SHIM 3x6x0.5MM - ORANGE (10)
9.99 €
T3 - US - 2010, XB4 - 2016, T2'007 - EU - 2007, X12 - 2015, RX8 - 2012, NT1 - 2010, T2R - 2006, T4 - 2017, T1 EVO2 - 2002, XB2 Carpet - 2017, X10 GT - 2009, NT1 - 2016, T3 - EU - 2010, XB4 - 2015, T2 - 2006, X12 - 2014, RX8 - 2011, NT1 - 2009, T2'009 - US - 2009, T4 - 2016, T1 - 2001, XB2 Carpet - 2016, X1 - 2018, NT1 - 2015, T1R, T3 - 2012, XB4 - 2014, X12 - 2012, NT1R - 2010, NT1 - 2007, XT2 - 2017, T2'009 - EU - 2009, T4 - 2015, RX8 - 2017, X12 US - 2018, X1 - 2017, NT1 - 2014, T1FK'05 - 2005, T3 - 2011, XB4 - 2013, X10 LINK GT - 2010, NT1 WE - 2010, XB4 2WD- 2014, T2'008 - US - 2008, T4 - 2014, X12 EU - 2018, RX8 - 2016, NT1 - 2013, X1 - 2016, T1FK - 2004, XB2 Dirt - 2017, X10 GT - 2018, NT1 PRO - 2012, XB4 - 2018, T2'008 - EU - 2008, T4 - 2013, X12 - 2017, RX8 - 2014, NT1 - 2012, X1 - 2015, T1 MINI, XB2 Dirt - 2016, X10 GT - 2016, NT1 EC - 2009, T3R - 2010, XB4 - 2017, T2'007 - US - 2007, X12 - 2016, RX8 - 2013, NT1 - 2011, T2R PRO - 2009, T4 - 2018, T1 EVO2 - 2003, XB2 Carpet - 2018, X10 GT - 2015, NT1 - 2017, XRAY
Alu shims 3x6mm size, 0.5mm thick. Orange color. Set of 10.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU SHOCK BODY (2)
14.90 €
NT1 - 2016, RX8 - 2017, NT1 - 2014, RX8 - 2016, NT1 - 2017, RX8 - 2014, NT1 - 2015, XRAY
CNC-machined externally-threaded shock bodies made from premium Swiss 7075 T6 aluminum and hardened for maximum life. Redesigned for improved traction and...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU SHOCK BODY ADJ. NUT (2)
6.60 €
XB8E - 2015, XT8 - 2009, XB8 - 2016, XB808E - 2010, XT8 - 2017, XB8 - 2015, XB808 - 2011, XT9 - 2013, XB9 - 2013, XB8 - 2014, XB808 - 2010, XB9 - 2012, GTX - 2017, XB808 - 2009, XB8E - 2017, XB9E - 2013, XB808 - 2008, XB8E - 2016, XT8 - 2007, XB8 - 2017, XRAY
CNC-machined shock spring adjustment collar for shock absorbers, made from premium lightweight 7075 T6 aluminum. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU SHOCK BODY NUT FOR SHOCK BOOT (2)
2.60 €
XT9 - 2013, XT8 - 2007, XB808 - 2008, XT8 - 2009, XB808 - 2009, XB808E - 2010, XB808 - 2010, XB808 - 2011, XRAY
Black hardcoated aluminum shock body nut. The entire lower shock assembly is secured with the new lower aluminum shock cap which makes assembly/disassembly...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU STAND FOR ENGINE MOUNT - NOVAROSSI, RB, MAX, JP, SIRIO, GRP - HARD COATED
46.99 €
XB808 - 2009, XB808 - 2010, XB9 - 2013, XB808 - 2011, XT8 - 2009, XB9 - 2012, XB8 - 2014, XB8 - 2015, XT9 - 2013, XB808 - 2008, XRAY
Authentic XRAY optional engine mounts for Nova-based engines. For use with #358714 XRAY optional 1-piece engine mount. CNC-machined from premium...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU STEERING PLATE 7075 T6 (3MM)
3.90 €
XB8 - 2005, XT8 - 2009, XT8 - 2007, XT9 - 2013, XB8R, XB8-TQ - 2006, XB8-EC - 2007, XRAY
Steering plate made of 3mm CNC-machined, highest-grade 7075 T6 aircraft aluminum. Xray stylish black finish with silver edging. Multiple steering linkage...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ANTI-ROLL BAR REAR 2.6 MM - SET
5.90 €
RX8 - 2013, RX8 - 2012, RX8 - 2011, XRAY
Tough steel rear anti-roll bar wire (2.6mm). Manually measured, selected, and straightened to eliminate all tweak. Laser engraved 2.6 for easy identification.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ANTI-ROLL BAR REAR 3.0 MM - SET
5.99 €
RX8 - 2013, RX8 - 2012, RX8 - 2011, XRAY
Tough steel rear anti-roll bar wire (3.0). Manually measured, selected, and straightened to eliminate all tweak. Laser engraved 3.0 for easy identification.
In stock
+ −
Add to wish list Add to comparison list
XRAY, BALL DIFF WASHER 9x14x0.5 (2)
2.90 €
M18, NT18T, M18 PRO, NT18MT, M18T PRO, NT18, M18T, M18MT, M18 PRO LiPo, XRAY
Set of two diff rings for 385001 Alu. Adjustable Ball Differential for the XRAY M18.
In stock
+ −
Add to wish list Add to comparison list
XRAY, BALL STEEL 2.4MM (24)
4.99 €
M18T, T1FK - 2004, M18, T1 - 2001, T1 EVO2 - 2002, M18 PRO, NT18T, M18 PRO LiPo, NT18MT, T1FK'05 - 2005, M18MT, NT18, T1R, T1 EVO2 - 2003, M18T PRO, T1 MINI, XRAY
Steel balls 2.4mm for ball differential. Set of 24 pieces is enough for two ball differentials (12 each).
In stock
+ −
Add to wish list Add to comparison list
XRAY, BALL STUD 5.8MM (4)
4.99 €
XT8 - 2009, XB8R, XT8 - 2007, XB8-TQ - 2006, XB8-EC - 2007, XB8 - 2005, XRAY
Ball stud 5.8mm. Manufactured from famous Hudy Spring Steel™. Set of 4.
In stock
+ −
Add to wish list Add to comparison list
XRAY, BALL STUD 5.8MM WITH BACKSTOP - V2 (2)
6.00 €
XT8 - 2009, XT9 - 2013, XB8R, XB8-TQ - 2006, XB8-EC - 2007, XT8 - 2007, XB8 - 2005, XRAY
Ball stud 5.8mm with backstop. Recommended for installation on steering blocks to prevent the steering linkages from disconnecting after a heavy...
In stock
+ −
Add to wish list Add to comparison list
XRAY, BALL-BEARING 1/4" x 3/8" x 1/8" FLANGED (2)
11.99 €
X1 - 2017, X12 - 2014, X1 - 2018, X12 EU - 2018, X12 - 2015, X10 GT - 2009, X12 - 2017, X12 - 2016, X10 GT - 2015, X10 GT - 2018, X10 LINK GT - 2010, X10 GT - 2016, X1 - 2015, X12 US - 2018, X1 - 2016, X12 - 2012, XRAY
High-speed flanged ball-bearings manufactured specially for XRAY. ID x OD x thickness (") = ?" x ⅜" x ⅛". Set of 2 pieces....
In stock
+ −
Add to wish list Add to comparison list
XRAY, BALL-BEARING 1/8" x 5/16" x 9/64" FLANGED (2)
7.99 €
X10 GT - 2015, X12 US - 2018, X10 GT - 2016, X10 LINK GT - 2010, X12 - 2014, X10 GT - 2018, X12 - 2015, X12 - 2016, X12 - 2012, X12 - 2017, X10 GT - 2009, X12 EU - 2018, XRAY
High-speed flanged ball-bearings manufactured specially for XRAY. ID x OD x thickness (") = ⅛" x 5/16" x 9/64". Set of 2 pieces....
In stock
+ −
Add to wish list Add to comparison list
XRAY, BALL-BEARING 3x6x2.5 (2)
4.99 €
XB2 Carpet - 2016, T4 - 2018, XT2 - 2017, T4 - 2013, T4 - 2017, XB2 Dirt - 2017, T3 - 2012, T3R - 2010, XB2 Dirt - 2016, T4 - 2014, T3 - 2011, XB2 Carpet - 2018, T3 - US - 2010, T4 - 2016, XB2 Carpet - 2017, T3 - EU - 2010, T4 - 2015, XRAY
High-quality ball-bearings, 13x6x2.5mm. Set of 2.  These ball-bearings are degreased and lightly oiled with AeroShell™ Fluid 12 oil for maximum...
In stock
+ −
Add to wish list Add to comparison list
XRAY, BALL-BEARING 4x7x2.5 (2)
3.90 €
T1R, M18T, T2'007 - US - 2007, T3 - EU - 2010, T1 EVO2 - 2003, T1FK'05 - 2005, M18T PRO, T2'008 - EU - 2008, T2R - 2006, T1 MINI, T4 - 2016, NT18, X1 - 2018, T1FK - 2004, T2'009 - EU - 2009, T2'009 - US - 2009, T4 - 2015, NT18MT, X1 - 2017, M18 PRO, T2'008 - US - 2008, T3R - 2010, NT18T, T4 - 2018, M18 PRO LiPo, T2 - 2006, T3 - US - 2010, T1 - 2001, T4 - 2017, M18MT, T2'007 - EU - 2007, T2R PRO - 2009, T1 EVO2 - 2002, XRAY
High-quality ball-bearings ID x OD x thickness (mm) = 4x7x2.5mm. Set of 2 pieces. These ball-bearings are degreased and lightly oiled with AeroShell...
In stock
+ −
Add to wish list Add to comparison list
XRAY, BALL-BEARING 5x8x2.5 (2)
9.99 €
NT1 - 2015, XB4 - 2016, T2 - 2006, T1FK'05 - 2005, RX8 - 2017, XB2 Carpet - 2017, T2'008 - US - 2008, M18MT, XB4 - 2015, T3 - US - 2010, T1 MINI, NT18MT, XB2 Carpet - 2016, RX8 - 2016, T2'008 - EU - 2008, XB4 - 2014, T2'009 - EU - 2009, XT2 - 2017, NT1 - 2017, T3R - 2010, NT18T, T1 EVO2 - 2003, XB4 - 2013, T3 - EU - 2010, XB4 2WD- 2014, NT1 - 2016, T2'007 - EU - 2007, T1 EVO2 - 2002, XB2 Dirt - 2017, T2R PRO - 2009, XB4 - 2018, M18T, T2'007 - US - 2007, RX8 - 2014, XB2 Dirt - 2016, T2'009 - US - 2009, M18T PRO, XB4 - 2017, T1R, T1FK - 2004, T1 - 2001, XB2 Carpet - 2018, T2R - 2006, XRAY
High-quality ball-bearings ID x OD x thickness (mm) = 5x8x2.5mm. Set of 2 pieces. These ball-bearings are degreased and lightly oiled with AeroShell...
In stock
+ −
Add to wish list Add to comparison list
XRAY, BALL-BEARING 5x8x2.5 FLANGED (2)
7.99 €
T1 EVO2 - 2003, T1 EVO2 - 2002, T1R, T1 - 2001, NT1 - 2017, T1FK - 2004, T1 MINI, XRAY
High-quality flanged ball-bearings ID x OD x thickness (mm) = 5x8x2.5mm. Set of 2 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, BALL-BEARING 8x14x4 FLANGED (2)
11.99 €
RX8 - 2013, RX8 - 2011, RX8 - 2012, GTX - 2017, XRAY
High-quality flanged ball-bearings ID x OD x thickness (mm) = 8 x 14 x 4. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY, BALL-BEARING AXIAL 2.5x5.4x0.8
6.90 €
M18 PRO LiPo, M18MT, NT18T, NT18MT, M18T PRO, M18T, M18 PRO, XRAY
Axial ball-bearing set 2.5x5.4x0.8. Includes two outer plates and high-grade polished balls.
In stock
+ −
Add to wish list Add to comparison list
XRAY, BEVEL DRIVE GEAR 10T
5.80 €
XB808 - 2008, XT8 - 2007, XT8 - 2017, XB808E - 2010, XT8 - 2009, XB808 - 2009, XT9 - 2013, XB808 - 2010, XB808 - 2011, XRAY
10-tooth bevel drive gear for front/rear differential. Precision machined on a special gear machine.
In stock
+ −
Add to wish list Add to comparison list
XRAY, BEVEL DRIVE GEAR 12T
14.99 €
XB8-EC - 2007, XB9 - 2012, XB8 - 2017, XB9 - 2013, XB8 - 2016, XB8E - 2017, XB9E - 2013, XB8R, XB8E - 2016, XB8 - 2015, XB8E - 2015, XB8 - 2014, XB8-TQ - 2006, XB8 - 2005, XRAY
12-tooth bevel drive gear for front/rear differential. Precision machined on a special gear machine.
In stock
+ −
Add to wish list Add to comparison list
XRAY, BEVELED DIFF. AXLE GEAR HOLDER
2.80 €
M18 PRO, M18, M18 PRO LiPo, NT18, XRAY
Molded composite front one-way bevel gear for 385101 Front One-Way Differential for XRAY M18.
In stock
+ −
Add to wish list Add to comparison list
XRAY, BEVELED DIFF. GEAR FOR BALL DIFF.
3.90 €
M18, M18 PRO, M18 PRO LiPo, NT18, XRAY
Molded composite bevel gear for 385001 Alu. Adjustable Ball Differential for the XRAY M18.
In stock
+ −
Add to wish list Add to comparison list
XRAY, BODY POSTS - (2EA)
5.90 €
XB8E - 2016, XB808 - 2011, XB8E - 2015, XB8 - 2016, XB808 - 2010, XB9E - 2013, XB8 - 2015, XB808 - 2009, XB9 - 2013, XB8 - 2014, XB808 - 2008, XB9 - 2012, XB808E - 2010, XB8E - 2017, XB8 - 2017, XRAY
Strong composite body post set includes one of each front & rear body posts.
In stock
+ −
Add to wish list Add to comparison list
XRAY, BRAKE DISK - HARDENED - V2
8.99 €
XB8 - 2016, XT8 - 2017, XB808 - 2011, XB8 - 2015, XT9 - 2013, XB8R, XB8 - 2014, XB808 - 2008, XB9 - 2012, XB8 - 2005, XB8-TQ - 2006, XB9 - 2013, GTX - 2017, XB8-EC - 2007, XT8 - 2007, XB808 - 2009, XB8 - 2017, XT8 - 2009, XB808 - 2010, XRAY
Heat-treated and hardened brake disk with super-flat surfaces for highly-effective braking and vibration-free operation.
In stock
+ −
Add to wish list Add to comparison list
XRAY, BRAKE PAD "SLS" (2)
14.99 €
NT1 - 2014, NT1 - 2007, NT1 - 2013, NT1 WE - 2010, NT1 - 2012, NT1 PRO - 2012, NT1R - 2010, NT1 EC - 2009, NT1 - 2017, NT1 - 2011, NT1 - 2016, NT1 - 2010, NT1 - 2015, NT1 - 2009, XRAY
Ultra-efficient brake pads made from new SLS high-friction material for smoother, more consistent braking. Set of 4.
In stock
+ −
Add to wish list Add to comparison list
XRAY, BRASS CHASSIS WEIGHT FRONT 20g
6.90 €
RX8 - 2012, RX8 - 2011, RX8 - 2013, RX8 - 2014, XRAY
Precision-machined brass chassis balancing weight. Designed for XRAY RX8 chassis with front and rear weight integration hole. Marked with the weight value...
In stock
+ −
Add to wish list Add to comparison list
XRAY, BRASS CHASSIS WEIGHT FRONT 60G
9.90 €
XB9 - 2012, XB9 - 2013, XB9E - 2013, XRAY
Optional brass chassis weight mounts to predrilled holes at front of XB9 chassis, to adjust the balance of the car.
In stock
+ −
Add to wish list Add to comparison list
 Prev
1 2 3 4 5 6 7 8 9 10
Next