|Set of 1mm-offset molded composite eccentric hubs support ball-bearings for differentials (4 hubs) and center layshaft (2 hubs). Fits XRAY T2’008, T3.
This optional “+1” set of eccentric composite hubs gives the differential an offset of 1mm from the centerline. When the eccentric hub is in the “upper diff position” the diff is 1mm above the centerline; when the eccentric hub is in the “lower diff position” the diff is 1mm below the centerline.
|(In comparison, the #302078 eccentric composite hubs included as standard in the T2’007 and T2’008 kits give an offset of 0.5mm.)|