210 8089888

Items marked by the "XRAY" tag:

Products

Sort by Popularity
96 Per Page
XRAY, BALL-BEARING 8x14x4 FLANGED (2)
11.99 €
GTX - 2017, RX8 - 2013, RX8 - 2011, RX8 - 2012, XRAY
High-quality flanged ball-bearings ID x OD x thickness (mm) = 8 x 14 x 4. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY, SET OF REAR LOWER SUSPENSION ARMS M18T (2)
3.90 €
NT18MT, M18MT, NT18T, M18T PRO, M18T, XRAY
Molded rear lower suspension arms for M18T made from tough composite material. Includes mounting points for shock absorbers and anti-roll bars.
In stock
+ −
Add to wish list Add to comparison list
XRAY, RUBBER TIRES + INSERTS, FRONT (50DEG)
11.90 €
M18, NT18, XRAY
Front rubber tires and inserts for M18. 50deg front tires are harder than stock kit front tires (40deg) for decreased front traction. Set of two...
In stock
+ −
Add to wish list Add to comparison list
BALL BEARING 6x13x5 STEEL SEALED-OIL
5.99 €
BALL BEARING 6x13x5 STEEL SEALED-OIL
In stock
+ −
Add to wish list Add to comparison list
XRAY, OFFSET SPUR GEAR 76T / 48 - HARD
9.99 €
T1FK - 2004, T1 MINI, XB2 Carpet - 2017, T2'008 - US - 2008, T4 - 2014, T1FK'05 - 2005, T1 - 2001, XB2 Carpet - 2018, T2'009 - EU - 2009, T4 - 2015, T1R, T1 EVO2 - 2002, XB2 Dirt - 2016, T2'009 - US - 2009, T4 - 2016, T2 - 2006, T1 EVO2 - 2003, XB2 Dirt - 2017, T2R - 2006, T4 - 2017, T2'007 - EU - 2007, T3 - US - 2010, XT2 - 2017, T3 - EU - 2010, T2R PRO - 2009, T4 - 2018, T2'007 - US - 2007, T3R - 2010, T3 - 2012, T3 - 2011, XB2 Carpet - 2016, T2'008 - EU - 2008, T4 - 2013, XRAY
XRAY precision-molded offset spur gear 76T 48P, strategically lightened to reduce rotating mass.
In stock
+ −
Add to wish list Add to comparison list
XRAY, SHOCK PISTON SET 6-HOLE (1.2; 1.3; 1.4MM) - DELRIN - V3
9.99 €
XB8E - 2015, XB9E - 2013, XB8 - 2017, XT8 - 2017, XB8 - 2016, XT9 - 2013, XB8 - 2015, XB9 - 2012, XB8 - 2014, XB8E - 2017, GTX - 2017, XB8E - 2016, XB9 - 2013, XRAY
Set of molded composite 6-hole shock pistons for two shock absorbers. These big-bore pistons are available with three different-sized holes (1.2, 1.3, and...
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE C-HUB RIGHT - 0° DEG. - HARD (ECS)
9.99 €
T4 - 2016, T2'008 - US - 2008, T3 - 2012, T4 - 2015, T2'008 - EU - 2008, T3 - 2011, T4 - 2014, T2'007 - US - 2007, T2R PRO - 2009, T4 - 2013, T2'007 - EU - 2007, T2R - 2006, T3R - 2010, T2 - 2006, T4 - 2018, T2'009 - US - 2009, T3 - US - 2010, T4 - 2017, T2'009 - EU - 2009, T3 - EU - 2010, XRAY
Molded composite C-hub for right steering block. Caster pre-set at 0°. HARD rigidity for rubber-tire racing and also foam tire racing. Use with...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ECS DRIVE SHAFT COUPLING - HUDY SPRING STEEL™
4.70 €
T4 - 2016, T2'008 - EU - 2008, T3 - 2011, T4 - 2015, T2'007 - US - 2007, T2R PRO - 2009, T4 - 2014, T2'007 - EU - 2007, T2R - 2006, T3R - 2010, T2 - 2006, T2'009 - US - 2009, T3 - US - 2010, T4 - 2018, T4 - 2013, T2'009 - EU - 2009, T3 - EU - 2010, T4 - 2017, T2'008 - US - 2008, T3 - 2012, XRAY
Drive shaft coupling for ECS drive shafts of XRAY T2, made from top-secret, world-renowned HUDY Spring Steel™. Specially hand-ground for maximum precision.
In stock
+ −
Add to wish list Add to comparison list
XRAY, GRAPHITE SHOCK TOWER REAR 3MM - LOWER
34.99 €
NT1 - 2013, XRAY
CNC-machined rear shock tower made from extra-thick 3.0mm top-grade graphite. Includes multiple shock upper mounting positions.
Out of stock
Out of stock Add to wish list Add to comparison list
LOW FRICTION KEVLAR DRIVE BELT 3x351MM
22.99 €
T4 2020, XRAY
Low Friction Kevlar Drive Belt 3x351mm
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE BELT PULLEY 19T - MID-CENTER
10.99 €
NT1 - 2016, NT1 - 2007, NT1 - 2015, NT1 - 2011, NT1 - 2014, NT1 PRO - 2012, NT1 - 2013, NT1 WE - 2010, NT1 - 2012, NT1 EC - 2009, NT1R - 2010, NT1 - 2010, NT1 - 2017, NT1 - 2009, XRAY
Molded composite 19T front belt pulley on middle shaft, drives front belt.
In stock
+ −
Add to wish list Add to comparison list
XRAY, NT1 CONICAL CLUTCH WASHER SPRING SET
12.99 €
NT1 - 2011, NT1 - 2017, NT1 - 2012, NT1 - 2016, NT1 - 2015, NT1 - 2014, NT1 PRO - 2012, NT1 WE - 2010, NT1 EC - 2009, NT1 - 2009, NT1R - 2010, NT1 - 2013, NT1 - 2010, NT1 - 2007, XRAY
New conical clutch washer springs offer more consistent clutch operation for maximum punch. When using the standard spring, after the clutch is set for...
In stock
+ −
Add to wish list Add to comparison list
Composite Ball Cup 13.9mm - Graphite (2)
7.90 €
XB8-2018, XB8E - 2017, XB8-2019, XRAY
Molded composite ball cup for cushioning alu M15 alu adjusting nut against 13.9mm pivot ball. To increase the reliability and free movement of suspension...
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE BEARING HUB FOR DIFF (4)
4.99 €
XB8 - 2017, XB9 - 2013, XB808 - 2011, XB8 - 2016, XB9E - 2013, XB808E - 2010, XB8 - 2015, XB8E - 2015, XB8 - 2014, XB8E - 2016, RX8 - 2017, XB808 - 2009, XB8E - 2017, RX8 - 2016, XB808 - 2008, XB9 - 2012, XB808 - 2010, XRAY
Molded composite hubs for supporting ball-bearings in diff bulkhead blocks. Set of 4.
In stock
+ −
Add to wish list Add to comparison list
FUEL LEVEL INDICATOR STICKER (4)
4.20 €
NT1 EC - 2009, NT1 - 2014, NT1 PRO - 2012, NT1 - 2015, NT1 WE - 2010, NT1 - 2011, NT1 - 2010, NT1 - 2012, NT1 - 2009, NT1R - 2010, NT1 - 2016, NT1 - 2007, NT1 - 2017, NT1 - 2013, XRAY
Fuel level indicator for XRAY fuel tank in the form of a white transparent die-cut sticker. Displays fuel measurement in 5cl increments. Set of 4. Apply...
In stock
+ −
Add to wish list Add to comparison list
XRAY, SILICONE O-RING 6x1.5 (10)
6.99 €
XT8 - 2009, XB808 - 2008, XB8E - 2016, XB8 - 2005, XT8 - 2007, XB8-TQ - 2006, XB8E - 2015, GTX - 2017, XB9E - 2013, XB8-EC - 2007, XB808E - 2010, XB9 - 2013, XB8 - 2017, XB808 - 2011, XB9 - 2012, XB8 - 2016, XT9 - 2013, XB808 - 2010, XB8R, XB8 - 2015, XT8 - 2017, XB808 - 2009, XB8E - 2017, XB8 - 2014, XRAY
Silicone O-ring fits over 6mm shaft. 1.5mm thick. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, BALL-BEARING 4x7x2.5 (2)
3.90 €
T4 - 2018, M18 PRO LiPo, T2 - 2006, T3 - US - 2010, T1 - 2001, T4 - 2017, M18MT, T2'007 - EU - 2007, T2R PRO - 2009, T1 EVO2 - 2002, T1R, M18T, T2'007 - US - 2007, T3 - EU - 2010, T1 EVO2 - 2003, T1FK'05 - 2005, M18T PRO, T2'008 - EU - 2008, T2R - 2006, T1 MINI, T4 - 2016, NT18, T1FK - 2004, X1 - 2018, T2'009 - EU - 2009, T2'009 - US - 2009, T4 - 2015, NT18MT, X1 - 2017, M18 PRO, T2'008 - US - 2008, T3R - 2010, NT18T, XRAY
High-quality ball-bearings ID x OD x thickness (mm) = 4x7x2.5mm. Set of 2 pieces. These ball-bearings are degreased and lightly oiled with AeroShell...
In stock
+ −
Add to wish list Add to comparison list
XRAY, GEARBOX CASE M18T
5.90 €
M18T PRO, NT18MT, NT18T, M18T, M18MT, XRAY
Molded gearbox case set for M18T made from tough composite material. Includes upper and lower cases.
In stock
+ −
Add to wish list Add to comparison list
XRAY, BRASS CHASSIS WEIGHT FRONT 20g
6.90 €
RX8 - 2013, RX8 - 2014, RX8 - 2012, RX8 - 2011, XRAY
Precision-machined brass chassis balancing weight. Designed for XRAY RX8 chassis with front and rear weight integration hole. Marked with the weight value...
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE ANTI-ROLL BAR BALL JOINT 5.8 MM (4)
6.99 €
RX8 - 2011, NT1 - 2007, NT1 PRO - 2012, NT1 - 2010, NT1 - 2011, NT1 - 2009, NT1 - 2012, RX8 - 2012, NT1 - 2013, NT1 WE - 2010, RX8 - 2013, NT1 - 2014, NT1R - 2010, NT1 EC - 2009, XRAY
Molded composite 5.8mm ball joints for rear anti-roll bar linkages. Set of 4.
In stock
+ −
Add to wish list Add to comparison list
XRAY, T4'18 ALU CHASSIS 2.0MM - SWISS 7075 T6
89.99 €
T4 - 2018, XRAY
Aluminum T4’18 chassis designed for increased traction, stability, and steering. The alu chassis gives better control and makes the car easier to drive....
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 COMPOSITE ECCENTRIC BUSHING (2)
4.99 €
XB808 - 2008, XB808E - 2010, XB9 - 2012, XB9 - 2013, XB808 - 2011, XB9E - 2013, XB808 - 2010, XB808 - 2009, XRAY
Eccentric bushings for adjusting suspension settings, made from tough composite. Fits XB808 alu suspension holders. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE SUSPENSION ARM - FRONT LOWER - RIGHT
5.90 €
X12 - 2012, X10 LINK GT - 2010, X10 GT - 2009, XRAY
Molded composite RIGHT front lower suspension arm for XRAY XII. Marked “R” for easy identification. Use with matching left front lower suspension arm 372120.
In stock
+ −
Add to wish list Add to comparison list
XRAY, NUT M2.5 (10)
4.99 €
XB8R, M18T, XB808 - 2008, XB808E - 2010, NT18MT, M18T PRO, XB808 - 2011, XB8 - 2005, NT18, XB808 - 2010, T2R PRO - 2009, M18 PRO LiPo, XB808 - 2009, T2R - 2006, XT8 - 2009, M18 PRO, XB8-EC - 2007, NT18T, XT8 - 2007, M18MT, XB8-TQ - 2006, XRAY
M2.5 nylock nut. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
BALL STUD 6.8MM WITH BACKSTOP L=6MM - M3x8 (2)
12.90 €
XB808 - 2008, XB8E - 2017, XB8 - 2016, XB808 - 2009, XB9 - 2012, XB8 - 2017, XB808 - 2010, XB9 - 2013, XB808 - 2011, XB8-2018, XT8 - 2017, XB808E - 2010, GTX - 2017, XB9E - 2013, XB8E - 2015, XB8 - 2014, XB8-2019, XB8E - 2016, XB8 - 2015, XRAY
Ball stud 6.8mm with backstop, made from steel. Additionally heat treated for maximum strength, reliability, and long life. Features M3x8 thread. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY, XT8/XB808 FRONT SHOCK SHAFT (2)
3.90 €
XB808 - 2009, XB808E - 2010, XB808 - 2008, XT8 - 2007, XB808 - 2010, XB808 - 2011, XRAY
Front shock shaft for XT8 made from large diameter hardened steel. Polished for smooth operation. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY 389181 MICRO SPEED CONTROLLER 300 WITH BRAKE
48.90 €
M18 PRO LiPo, M18 PRO, M18, XRAY
The XMC300 electronics speed controller is one of the world’s smallest ESCs and has been specially designed for the XRAY M18 micro racecar. A high...
In stock
+ −
Add to wish list Add to comparison list
XRAY, XCA Alu Pinion Gear - 21T (2nd) - 7075 T6 - Hard Coated
19.99 €
RX8 - 2013, RX8 - 2014, GTX8, RX8, RX8 - 2012, XRAY
High-strength 21T pinion gear (2nd gear) made from tough 7075 T6 alu and specially hardcoated for superior strength, light weight, and high...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU ADJUSTABLE BODY POST STOP (2)
24.99 €
X1 - 2015, T2R PRO - 2009, NT1 EC - 2009, X12 - 2016, T4 - 2013, T2'007 - US - 2007, X10 GT - 2016, T3 - EU - 2010, X1 - 2016, T2R - 2006, X12 - 2017, NT1 - 2017, T4 - 2014, T2'007 - EU - 2007, X10 GT - 2018, NT1 - 2012, X1 - 2017, T2'009 - US - 2009, X12 EU - 2018, NT1 - 2016, T4 - 2015, T2 - 2006, X10 LINK GT - 2010, NT1 - 2011, X1 - 2018, T3R - 2010, X12 US - 2018, T3 - US - 2010, T4 - 2016, NT1R - 2010, X12 - 2012, NT1 - 2010, X10 GT - 2009, T2'009 - EU - 2009, NT1 - 2015, T4 - 2017, T3 - 2012, NT1 WE - 2010, X12 - 2014, NT1 - 2009, X10 GT - 2015, T2'008 - US - 2008, NT1 - 2014, T4 - 2018, T3 - 2011, NT1 PRO - 2012, X12 - 2015, NT1 - 2007, T2'008 - EU - 2008, NT1 - 2013, XRAY
Very handy, easily externally adjustable body post from Swiss 7075 T6 aluminum. Allows for adjustment of body height by 3mm without needing to change the...
In stock
+ −
Add to wish list Add to comparison list
XRAY, STEEL SHOCK BUSHING (2)
8.90 €
XB808 - 2010, XB9E - 2013, GTX - 2017, XB808 - 2009, XT8 - 2007, XB8E - 2015, XB808 - 2008, XT8 - 2009, XB8E - 2016, XB8 - 2017, XT8 - 2017, XB8E - 2017, XB8 - 2016, XT9 - 2013, XB808E - 2010, XB9 - 2012, XB8 - 2015, XB808 - 2011, XB9 - 2013, XB8 - 2014, XRAY
Machined steel upper mounting bushing for shock absorbers. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY, STEEL STEERING BUSHING (2+2)
16.99 €
T4 - 2017, T2'009 - EU - 2009, T3 - EU - 2010, RX8 - 2016, T4 - 2016, T2'008 - US - 2008, T3 - 2012, RX8 - 2014, T4 - 2015, T2'008 - EU - 2008, T3 - 2011, RX8 - 2013, T4 - 2014, T2'007 - US - 2007, T2R PRO - 2009, RX8 - 2012, T4 - 2013, T2'007 - EU - 2007, XB4 2WD- 2014, T2R - 2006, RX8 - 2011, T3R - 2010, T2 - 2006, T4 - 2018, T2'009 - US - 2009, GTX - 2017, T3 - US - 2010, RX8 - 2017, XRAY
Precision-machined bushing for front C-hub steering block pivot screws on XRAY T2, T3. Includes 4 pieces: 2 short + 2 long.
In stock
+ −
Add to wish list Add to comparison list
XRAY, SCREW PHILLIPS 3.0x14 (10)
4.90 €
XB9E - 2013, GTX - 2017, XB9 - 2013, XT8 - 2017, XB808E - 2010, XB8 - 2005, XB808 - 2011, XT9 - 2013, XB8E - 2015, XB8 - 2014, XB808 - 2008, XB8E - 2016, XB8 - 2015, XB808 - 2009, XB8E - 2017, XB8 - 2016, XT8 - 2007, XB808 - 2010, XB8R, XB8 - 2017, XT8 - 2009, XB8-TQ - 2006, XB9 - 2012, XB8-EC - 2007, XRAY
M3.0x14 pan-head screw, self-tapping, Phillips drive. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, STEEL PIVOT BALL 13.7 MM (2)
17.90 €
GTX - 2017, XB8E - 2016, XB8 - 2017, XB8E - 2015, XB8 - 2016, XB8 - 2014, XB8E - 2017, XB8 - 2015, XRAY
13.7mm steel pivot ball, ultra-precision hand ground for high durability and long life. Set of 2. Fits XB8. XRAY Pivot Ball Suspension XPBS™ is a uniquely...
In stock
+ −
Add to wish list Add to comparison list
Anti-Roll Bar Front Female - HUDY Spring Steel™
14.90 €
RX8, XRAY
Female front anti-roll bar CNC-machined from world-renowned HUDY Spring Steel™ for long lifespan. For use with #342450 male front anti-roll bar. The...
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE SPUR GEAR - 78T / 64P
10.99 €
X12 - 2015, X12 US - 2018, X10 GT - 2009, X12 - 2014, X1 - 2018, X12 - 2012, X1 - 2017, X10 LINK GT - 2010, X1 - 2016, X10 GT - 2018, X12 - 2017, X1 - 2015, X10 GT - 2016, X12 - 2016, X12 EU - 2018, X10 GT - 2015, XRAY
Precision-moulded composite spur gear 78 tooth, 64-pitch. Popular sizes available.
In stock
+ −
Add to wish list Add to comparison list
XRAY, HIGH-SPEED BALL-BEARING 8x16x5 RUBBER SEALED (2)
9.99 €
XB808E - 2010, XB9 - 2012, XB808 - 2010, XB808 - 2011, XB9 - 2013, XB8-TQ - 2006, XB8R, XB9E - 2013, XB8 - 2005, XB8E - 2017, XT8 - 2007, XB8 - 2015, XB8-EC - 2007, XT8 - 2009, XB8 - 2016, XB8 - 2014, XB8E - 2015, XT8 - 2017, GTX - 2017, XB8 - 2017, XB8E - 2016, XT9 - 2013, XRAY
New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 8x16x5. Set of 2 pieces. Top-quality professional...
In stock
+ −
Add to wish list Add to comparison list
XRAY, NARROW ALU PINION GEAR - HARD COATED 19T / 64
9.99 €
X10 GT - 2015, T2'008 - EU - 2008, X10 LINK GT - 2010, T3R - 2010, T1FK'05 - 2005, T4 - 2016, T2R - 2006, T4 - 2018, T2'007 - EU - 2007, X12 - 2012, T4 - 2013, T1R, X12 EU - 2018, T2R PRO - 2009, X1 - 2015, T1 - 2001, X12 - 2014, T4 - 2014, T2 - 2006, X12 US - 2018, T3 - 2011, X1 - 2016, T1 EVO2 - 2002, X12 - 2015, T4 - 2015, X12 - 2017, T3 - 2012, X1 - 2017, T1 EVO2 - 2003, T2'008 - US - 2008, X10 GT - 2016, T4 - 2017, X12 - 2016, T3 - EU - 2010, X1 - 2018, T1 MINI, T2'009 - EU - 2009, X10 GT - 2009, T2'007 - US - 2007, X10 GT - 2018, T3 - US - 2010, T1FK - 2004, T2'009 - US - 2009, XRAY
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU SHOCK BODY (2)
14.90 €
RX8 - 2014, NT1 - 2015, NT1 - 2016, RX8 - 2017, NT1 - 2014, RX8 - 2016, NT1 - 2017, XRAY
CNC-machined externally-threaded shock bodies made from premium Swiss 7075 T6 aluminum and hardened for maximum life. Redesigned for improved traction and...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU ONE-PIECE ENGINE MOUNT - SWISS 7075 T6 - HARD COATED
14.90 €
XB9 - 2012, XB8 - 2015, XB808 - 2011, XB808 - 2010, XB808 - 2009, XT9 - 2013, XB808 - 2008, XT8 - 2009, XB9 - 2013, XB8 - 2014, XRAY
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE SOLID AXLE ADAPTER
4.99 €
NT1 - 2015, NT1 - 2009, NT1 - 2014, NT1 - 2007, NT1 - 2013, NT1 PRO - 2012, NT1 - 2012, NT1 WE - 2010, NT1 - 2011, NT1 - 2017, NT1R - 2010, NT1 EC - 2009, NT1 - 2016, NT1 - 2010, XRAY
Molded composite adapter to convert #335000 front gear differential into a solid front axle. Used to replace internal bevel and satellite gears.
In stock
+ −
Add to wish list Add to comparison list
ALU ADJUSTING NUT M15x1 (2)
7.50 €
XB8 - 2014, GTX - 2017, XB8E - 2017, XB8E - 2016, XB8 - 2017, XB8E - 2015, XB8 - 2016, XB8 - 2015, XRAY
In stock
+ −
Add to wish list Add to comparison list
Center Differential Case - V2 - Graphite
21.99 €
XB8, XRAY
Large volume rubber-sealed CENTER differential case made from new specially-formulated graphite composite material. Lighter, tougher material with higher...
In stock
+ −
Add to wish list Add to comparison list
CENTRAL CVD SHAFT UNIVERSAL JOINT - HUDY SPRING STEEL™
27.99 €
XB9E - 2013, XB9 - 2012, XB8-2018, XB8E - 2015, XB8 - 2017, XB8E - 2016, GTX - 2017, XB8E - 2017, XB8 - 2014, XB9 - 2013, XB8-2019, XB8 - 2015, XT8 - 2017, XT9 - 2013, XB8 - 2016, XRAY
Central CVD shaft universal joint made from world-renown HUDY Spring Steel™. Strategically machined for toughness and light weight without compromising...
In stock
+ −
Add to wish list Add to comparison list
XRAY, CONE WASHER ST 4x12 (10)
4.90 €
T1FK'05 - 2005, T1FK - 2004, T1 EVO2 - 2002, T1 EVO2 - 2003, T1 - 2001, T2 - 2006, T1 MINI, T1R, XRAY
Cone washer ID x OD x thickness = 4.2mm x 12mm x 0.4mm. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, BALL-BEARING 3x6x2.5 (2)
4.99 €
XB2 Carpet - 2018, T3 - US - 2010, T4 - 2016, XB2 Carpet - 2017, T3 - EU - 2010, T4 - 2015, XB2 Carpet - 2016, T4 - 2018, XT2 - 2017, T4 - 2013, T4 - 2017, XB2 Dirt - 2017, T3 - 2012, T3R - 2010, XB2 Dirt - 2016, T4 - 2014, T3 - 2011, XRAY
High-quality ball-bearings, 13x6x2.5mm. Set of 2.  These ball-bearings are degreased and lightly oiled with AeroShell™ Fluid 12 oil for maximum...
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE BALL JOINT 5.8 (8)
13.99 €
XB8E - 2017, XB8 - 2014, XB808 - 2008, XT8 - 2017, XB8E - 2016, XB8 - 2005, XB8-TQ - 2006, XT9 - 2013, XB8E - 2015, GTX - 2017, XB8-EC - 2007, XB808E - 2010, XB9 - 2013, XB8 - 2017, XB808 - 2011, XB9E - 2013, XB9 - 2012, XB8 - 2016, XB808 - 2010, XT8 - 2007, XB8R, XB8 - 2015, XB808 - 2009, XT8 - 2009, XRAY
Ball joints for 5.8mm pivot balls. Set of 8.
In stock
+ −
Add to wish list Add to comparison list
XRAY, SET OF ECCENTRIC COMPOSITE HUBS "1" FOR BULKHEADS (4+2)
1.90 €
T2'008 - US - 2008, T2'008 - EU - 2008, T3 - 2011, T3 - 2012, T2'009 - EU - 2009, T3 - EU - 2010, T2'009 - US - 2009, T3 - US - 2010, T2R PRO - 2009, T3R - 2010, XRAY
Set of 1mm-offset molded composite eccentric hubs support ball-bearings for differentials (4 hubs) and center layshaft (2 hubs). Fits XRAY T2’008,...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ANTI-ROLL BAR FRONT 1.2 MM
1.90 €
T2'009 - US - 2009, T3 - 2011, T2'008 - US - 2008, T3 - 2012, T2 - 2006, T3 - EU - 2010, T2'007 - EU - 2007, T3 - US - 2010, T2'007 - US - 2007, T2R - 2006, T3R - 2010, T2'008 - EU - 2008, T2'009 - EU - 2009, T2R PRO - 2009, XRAY
T2 front anti-roll bar, 1.2mm dia, gold colour. Same bar as included in #302401 T2 Front Anti-Roll Bar Set.
In stock
+ −
Add to wish list Add to comparison list
XRAY, NUT M4 WITH SERRATED FLANGE (10)
11.99 €
NT1 - 2010, NT1 EC - 2009, XB4 - 2014, XB4 2WD- 2014, NT1 - 2013, NT1 PRO - 2012, XB2 Dirt - 2017, XB4 - 2018, NT1 - 2012, NT1 WE - 2010, NT1 - 2014, XB4 - 2017, NT1 - 2011, NT1R - 2010, NT1 - 2015, XB4 - 2016, NT1 - 2009, XB2 Carpet - 2016, XT2 - 2017, NT1 - 2016, XB4 - 2015, NT1 - 2007, XB2 Carpet - 2017, XB4 - 2013, NT1 - 2017, XB2 Dirt - 2016, XB2 Carpet - 2018, XRAY
High-quality M4 nut with serrated flange. Set of 10.
In stock
+ −
Add to wish list Add to comparison list
Extreme Heat Resistant Center Diff Pin with Inserts (2+4)
29.70 €
XB8-2018, XB8-2019, XB8, XB8 - 2017, XRAY
Precision-ground polished steel pin 3.5 x 33 mm for internal satellite gears used in large center differential #355013. Mounted in steel inserts instead of...
In stock
+ −
Add to wish list Add to comparison list
XRAY, SHOCK FOAM INSERTS (4)
1.99 €
T1 EVO2 - 2003, NT1 - 2007, T3 - 2012, NT1 PRO - 2012, T2'008 - US - 2008, T1 EVO2 - 2002, T1FK'05 - 2005, T3 - EU - 2010, NT1 EC - 2009, T2'009 - EU - 2009, T1 - 2001, T1R, T3 - US - 2010, NT1 - 2012, T2'009 - US - 2009, RX8 - 2012, T2 - 2006, T3R - 2010, NT1 - 2011, T2R - 2006, RX8 - 2011, T2'007 - EU - 2007, T1FK - 2004, NT1 - 2010, T2R PRO - 2009, NT1R - 2010, T2'007 - US - 2007, T1 MINI, NT1 - 2009, T3 - 2011, NT1 WE - 2010, T2'008 - EU - 2008, XRAY
Foam inserts for XRAY shocks, go between shock upper mount and rubber membrane. Set of 4 pieces.
In stock
+ −
Add to wish list Add to comparison list
CVD DRIVE SHAFT COUPLING - HUDY SPRING STEEL™
9.99 €
GTX - 2017, XB808 - 2010, XB8 - 2014, XB808 - 2011, XB8 - 2015, XB808E - 2010, XB8-2018, XB9 - 2013, XB8-2019, XB9 - 2012, XB9E - 2013, XB8E - 2015, XB808 - 2008, XB808 - 2009, XRAY
CVD drive shaft coupling for CVD drive shafts made from world-renown Hudy Spring Steel™. Specially hand-ground for maximum precision.
In stock
+ −
Add to wish list Add to comparison list
XRAY, NUT M2.5 - SHORT (10)
4.90 €
XB9E - 2013, XB8 - 2015, XB9 - 2013, XB8 - 2014, XB9 - 2012, GTX - 2017, XB8E - 2017, XB8E - 2016, XB8E - 2015, XT9 - 2013, XB8 - 2017, XT8 - 2017, XB8 - 2016, XRAY
M2.5 short nylock nut. Set of 10.
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 REAR CENTRAL CVD DRIVE SHAFT 133MM - HUDY SPRING STEEL™
7.99 €
XB808 - 2010, XB808 - 2009, XRAY
CNC-machined CVD rear center drive shaft for XB808 made from world-renown HUDY Spring Steel™. This lightweight drive shaft has been strategically...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU STAND FOR ENGINE MOUNT - NOVAROSSI, RB, MAX, JP, SIRIO, GRP - HARD COATED
46.99 €
XB8 - 2015, XT9 - 2013, XB808 - 2008, XB808 - 2009, XB808 - 2010, XB9 - 2013, XB808 - 2011, XT8 - 2009, XB9 - 2012, XB8 - 2014, XRAY
Authentic XRAY optional engine mounts for Nova-based engines. For use with #358714 XRAY optional 1-piece engine mount. CNC-machined from premium...
In stock
+ −
Add to wish list Add to comparison list
SCREW PHILLIPS M3x5 (10)
4.90 €
M18T PRO, M18 PRO, M18T, M18 PRO LiPo, M18MT, XRAY
M3x5 pan-head machine screw, Phillips drive. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, BALL STUD 5.8MM (4)
4.99 €
XB8-EC - 2007, XB8 - 2005, XT8 - 2009, XB8R, XT8 - 2007, XB8-TQ - 2006, XRAY
Ball stud 5.8mm. Manufactured from famous Hudy Spring Steel™. Set of 4.
In stock
+ −
Add to wish list Add to comparison list
XRAY, HEX SCREW SH M3x8 (10)
7.99 €
NT1 - 2007, XB2 Dirt - 2017, XT8 - 2009, T4 - 2018, XB808 - 2009, XB8 - 2016, T2 - 2006, T3R - 2010, XB8 - 2005, X12 EU - 2018, XB8E - 2017, RX8 - 2017, NT1 EC - 2009, T1 EVO2 - 2002, T2R - 2006, X10 LINK GT - 2010, NT1 - 2009, XB4 - 2013, XT8 - 2007, X1 - 2015, T2'007 - EU - 2007, XB808 - 2008, XB8-EC - 2007, X12 US - 2018, T4 - 2013, NT1 - 2014, XB8E - 2016, T1 - 2001, GTX - 2017, T1 EVO2 - 2003, T2R PRO - 2009, X12 - 2012, NT1 - 2011, XB4 - 2014, XT2 - 2017, X1 - 2016, T2'007 - US - 2007, XB8-TQ - 2006, XB4 - 2018, XB2 Carpet - 2016, T4 - 2014, NT1 PRO - 2012, XB8E - 2015, RX8 - 2011, NT1 - 2012, T1 MINI, T3 - 2011, X12 - 2014, X1 - 2017, NT1 - 2010, XB4 - 2015, XB9E - 2013, T2'008 - EU - 2008, X10 GT - 2009, XB2 Carpet - 2017, T4 - 2015, NT1 WE - 2010, XB808E - 2010, RX8 - 2012, T1FK - 2004, T3 - 2012, XB4 2WD- 2014, X12 - 2015, X1 - 2018, NT1R - 2010, XB4 - 2016, XB9 - 2013, T2'008 - US - 2008, X10 GT - 2015, XB2 Carpet - 2018, XT9 - 2013, T4 - 2016, NT1 - 2016, XB808 - 2011, RX8 - 2013, T1FK'05 - 2005, T3 - EU - 2010, XB8 - 2014, X12 - 2016, RX8 - 2014, NT1 - 2013, XB4 - 2017, XB9 - 2012, T2'009 - EU - 2009, X10 GT - 2016, NT1 - 2015, XB2 Dirt - 2016, XT8 - 2017, T4 - 2017, XB808 - 2010, XB8 - 2017, T1R, T3 - US - 2010, XB8 - 2015, X12 - 2017, XB8R, RX8 - 2016, NT1 - 2017, T2'009 - US - 2009, X10 GT - 2018, XRAY
M3x8 button-head machine screw, hex drive. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, NARROW ALU PINION GEAR - HARD COATED 18T / 48
13.99 €
T2'008 - EU - 2008, T2R PRO - 2009, T1R, T4 - 2014, T1 - 2001, T3 - 2011, T2 - 2006, T4 - 2015, T1 EVO2 - 2002, T3 - 2012, T2'007 - EU - 2007, T4 - 2016, T1 EVO2 - 2003, T3 - US - 2010, T2'009 - EU - 2009, T4 - 2017, T1 MINI, T3R - 2010, T2'008 - US - 2008, T2'009 - US - 2009, T4 - 2018, T1FK - 2004, T3 - EU - 2010, T2'007 - US - 2007, T2R - 2006, T1FK'05 - 2005, T4 - 2013, XRAY
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the...
In stock
+ −
Add to wish list Add to comparison list
XRAY 380040 M18-RTR - 4WD SHAFT DRIVE 1/18 MICRO CAR - LUXURY RTR
189.99 €
The M18 4WD Shaft Drive Micro Car Luxury produced by XRAY in 1/18 scale M18 / M18Pro / M18T / M18MT series AWD drivetrain RTR (Ready-to-Run), is...
In stock
+ −
Add to wish list Add to comparison list
FUEL TANK HOLDERS (2)
4.90 €
XB8-TQ - 2006, XB9 - 2012, XB8-2019, XT8 - 2009, XB9 - 2013, XT8 - 2007, XB8 - 2017, XB8 - 2015, XB808 - 2009, XB8-2018, GTX - 2017, XB808 - 2010, XB8-EC - 2007, XB8 - 2005, XT9 - 2013, XB808 - 2011, XB808 - 2008, XB8 - 2014, XT8 - 2017, XB8R, XB8 - 2016, XRAY
Molded composite mounting posts for fuel tank. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY TEAM SWEATER -BLUE (M)
59.99 €
In stock
+ −
Add to wish list Add to comparison list
XRAY, HARDENED SHOCK SHAFT - SHORT (2)
3.90 €
T2'009 - US - 2009, T3R - 2010, T2'009 - EU - 2009, T3 - EU - 2010, T3 - 2012, T2'008 - US - 2008, T3 - 2011, T2'008 - EU - 2008, T2R PRO - 2009, T3 - US - 2010, XRAY
Hardened, high-strength short shock shafts for use with #308302 XRAY short shock absorbers. Polished for super-smooth operation. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY O-RING 12.1 x 1.6 (10)
7.00 €
T2'007 - EU - 2007, XT8 - 2009, XB8 - 2017, RX8 - 2012, NT1 - 2009, T2R - 2006, XB8E - 2016, T1 EVO2 - 2003, NT1 - 2016, T3R - 2010, T2 - 2006, XT8 - 2007, RX8 - 2011, XB8 - 2016, T2'009 - US - 2009, NT1 - 2007, XB8E - 2015, T1 EVO2 - 2002, NT1 - 2015, T3 - US - 2010, T1R, XB9E - 2013, NT1R - 2010, XB8 - 2015, T2'009 - EU - 2009, GTX - 2017, XB808E - 2010, T1 - 2001, NT1 - 2014, T3 - EU - 2010, T1FK'05 - 2005, XB9 - 2013, NT1 WE - 2010, XB8 - 2014, T2'008 - US - 2008, XB808 - 2011, RX8 - 2017, NT1 - 2012, T3 - 2012, T1FK - 2004, XB9 - 2012, NT1 PRO - 2012, XB8 - 2005, T2'008 - EU - 2008, XT9 - 2013, XB8-TQ - 2006, RX8 - 2016, NT1 - 2011, T3 - 2011, T1 MINI, XB8R, NT1 EC - 2009, X1 - 2016, T2'007 - US - 2007, XT8 - 2017, XB8-EC - 2007, RX8 - 2014, NT1 - 2010, T2R PRO - 2009, XB8E - 2017, NT1 - 2017, X1 - 2015, XRAY
Rubber O-ring fits over 12mm shaft. 1.6mm thick. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, HIGH-PERFORMANCE KEVLAR DRIVE BELT FRONT 5.0 x 186 MM - V2
19.99 €
NT1 - 2009, NT1 - 2007, NT1 EC - 2009, NT1 - 2010, NT1 - 2017, NT1 PRO - 2012, NT1 - 2016, NT1 WE - 2010, NT1 - 2015, NT1 - 2011, NT1R - 2010, NT1 - 2013, NT1 - 2014, NT1 - 2012, XRAY
High-performance Kevlar®-reinforced front drive belt 5.0 x 186mm.
In stock
+ −
Add to wish list Add to comparison list
XRAY 350504 XRAY GTX'23
939.99 €
XRAY, 1/8 ON-ROAD
In stock
+ −
Add to wish list Add to comparison list
Anti-Roll Bar Front Male - HUDY Spring Steel™
14.90 €
RX8, XRAY
Male front anti-roll bar CNC-machined from world-renowned HUDY Spring Steel™ for long lifespan. For use with #342440 female front anti-roll bar. The...
In stock
+ −
Add to wish list Add to comparison list
XRAY WASHER S 3.2 (10)
6.99 €
T1 EVO2 - 2003, XT8 - 2009, M18T, XB808 - 2008, T2'008 - US - 2008, RX8 - 2013, T3 - EU - 2010, XB4 - 2017, XB8E - 2017, NT1 EC - 2009, T1 MINI, T3R - 2010, XB808 - 2009, M18T PRO, RX8 - 2014, XB4 - 2016, T3 - US - 2010, XB4 - 2018, XB9 - 2012, NT1 PRO - 2012, T1FK - 2004, T2'009 - US - 2009, XB808 - 2010, NT1 - 2007, RX8 - 2016, XB4 - 2015, T2 - 2006, XB8 - 2014, XB9 - 2013, NT1 WE - 2010, T1FK'05 - 2005, T2R - 2006, XB808 - 2011, NT1 - 2009, RX8 - 2017, XT9 - 2013, T2'007 - EU - 2007, XB8 - 2015, T2'009 - EU - 2009, NT1R - 2010, T1R, T2R PRO - 2009, XB808E - 2010, NT1 - 2010, T1 - 2001, XB9E - 2013, GTX - 2017, XB8 - 2016, T2'007 - US - 2007, RX8 - 2011, XT8 - 2017, T3 - 2011, XB8E - 2015, NT1 - 2011, T1 EVO2 - 2002, XT8 - 2007, M18MT, XB8 - 2017, T2'008 - EU - 2008, RX8 - 2012, T3 - 2012, XB8E - 2016, NT1 - 2012, XRAY
Flat washer, 3.2mm ID. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE STEERING & SERVO BALL JOINT 5.8 MM (4+2)
12.99 €
RX8 - 2011, RX8 - 2014, NT1 - 2016, NT1R - 2010, NT1 - 2009, NT1 - 2014, NT1 WE - 2010, NT1 - 2007, NT1 - 2013, NT1 PRO - 2012, RX8 - 2016, NT1 - 2012, NT1 EC - 2009, RX8 - 2017, RX8 - 2013, NT1 - 2011, NT1 - 2017, RX8 - 2012, NT1 - 2010, NT1 - 2015, XRAY
Molded composite 5.8 ball joints for steering & servo linkages. Includes 4 long and 2 short ball joints.
In stock
+ −
Add to wish list Add to comparison list
XRAY, SHOCK RUBBER MEMBRANE (4)
4.20 €
XT8 - 2009, XB8 - 2017, XB8E - 2015, XT8 - 2007, XB8 - 2016, XB808E - 2010, XB9E - 2013, XB8 - 2015, XB808 - 2011, XB9 - 2013, XB8 - 2014, XB808 - 2010, XB9 - 2012, GTX - 2017, XT9 - 2013, XB808 - 2009, XB8E - 2017, XT8 - 2017, XB808 - 2008, XB8E - 2016, XRAY
Shock membrane for shock absorbers, made of soft molded rubber. The new shock membranes are now wider to fit the new big-bore shocks. The material has been...
In stock
+ −
Add to wish list Add to comparison list
XRAY, HIGH-SPEED BALL-BEARING 10x16x4 RUBBER SEALED (2)
10.99 €
NT1 PRO - 2012, NT1 - 2010, NT1 EC - 2009, NT1 - 2011, NT1 - 2017, NT1 - 2012, NT1 - 2016, NT1 - 2013, NT1 - 2014, NT1R - 2010, NT1 - 2007, NT1 - 2015, NT1 WE - 2010, NT1 - 2009, XRAY
New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 10x16x4. Set of 2 pieces.   Top-quality...
In stock
+ −
Add to wish list Add to comparison list
XRAY HEX SCREW SB M5x4 (10)
6.99 €
XB808 - 2009, XB8-TQ - 2006, XB8R, XB8-EC - 2007, XB808 - 2010, GTX - 2017, XB9 - 2012, XT8 - 2017, XB808 - 2011, XB8 - 2005, XB9 - 2013, XB808E - 2010, XB8 - 2014, XB9E - 2013, XB8E - 2015, XB8 - 2015, XT9 - 2013, XT8 - 2007, XB8E - 2016, XB8 - 2016, XB808 - 2008, XT8 - 2009, XB8E - 2017, XB8 - 2017, XRAY
M5x4 setscrew, hex drive. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, DRIVE SHAFT COUPLING - SPRING STEEL (2)
3.30 €
T1FK - 2004, T1 - 2001, T1FK'05 - 2005, T1R, T1 MINI, T1 EVO2 - 2003, T1 EVO2 - 2002, XRAY
Hudy Spring Steel drive shaft coupling, works in front and rear drive shafts. Specially hand-ground for maximum precision. Set of two.
In stock
+ −
Add to wish list Add to comparison list
XRAY, CONE WASHER ST 4x10 (10)
4.99 €
T1 EVO2 - 2003, T1 MINI, T1 EVO2 - 2002, T1R, T1 - 2001, T1FK'05 - 2005, T1FK - 2004, XRAY
Cone washer ID x OD x thickness = 4.2mm x 10mm x 0.4mm. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, GRAPHITE RADIO PLATE - FLEX - V5
17.90 €
NT1 - 2012, NT1 WE - 2010, NT1 - 2010, NT1 PRO - 2012, NT1 - 2009, NT1 EC - 2009, NT1 - 2007, NT1 - 2011, NT1R - 2010, XRAY
CNC-machined radio plate for NT1 is made from top-quality graphite material. Strategically-placed cutouts allow quick & easy adjustment of linkages.
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE STEERING BLOCK LEFT - V2
9.99 €
NT1 - 2012, NT1 WE - 2010, NT1 - 2011, NT1R - 2010, NT1 - 2010, NT1 EC - 2009, NT1 - 2009, NT1 - 2014, NT1 - 2007, NT1 - 2013, NT1 PRO - 2012, XRAY
Molded composite left-side steering block.
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE FRAME SHOCK PARTS - WIDE
2.00 €
XB8-EC - 2007, XB8 - 2005, XT8 - 2007, XB8R, XB8-TQ - 2006, XRAY
Set of composite molded parts for 2 new large-bore shock absorbers. Includes top pivots, spring top collar, spring lower collar, ball joints and shims.
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 COMPOSITE SHOCK 6-HOLE PISTON SET (1.2; 1.3; 1.4MM)
1.50 €
XB808 - 2011, XT8 - 2007, XB808 - 2008, XB808E - 2010, XT8 - 2009, XB808 - 2009, XB808 - 2010, XRAY
Set of molded composite 6-hole shock pistons for two shock absorbers. These 2-hole big-bore pistons are available with three different-sized holes...
In stock
+ −
Add to wish list Add to comparison list
XRAY, 362290 STEEL STEERING BUSHING - SHORT (2)
9.99 €
XB4 - 2014, XB4 - 2017, XB4 - 2015, XB4 - 2018, XB4 - 2016, XB4 2WD- 2014, XB2 Dirt - 2017, XB2 Dirt - 2016, XT2 - 2017, XB2 Carpet - 2016, XB4 - 2013, XB2 Carpet - 2017, XB2 Carpet - 2018, XRAY
Precision-machined short bushing for front C-hub steering block pivot screws. These bushings are used also in composite servo saver arms and in composite...
In stock
+ −
Add to wish list Add to comparison list
XRAY, WASHER S 7x10x0.5 (10)
9.99 €
NT1 - 2016, XT8 - 2009, XB8 - 2014, NT1 WE - 2010, XB808 - 2009, NT1 - 2012, GTX - 2017, XT8 - 2007, RX8 - 2017, RX8 - 2014, XB808 - 2008, NT1 - 2015, NT1 - 2011, XB9E - 2013, RX8 - 2016, RX8 - 2013, XB8-EC - 2007, NT1 EC - 2009, XB9 - 2013, NT1 - 2013, RX8 - 2012, XB8 - 2017, RX8 - 2011, XB9 - 2012, NT1 - 2010, NT1R - 2010, XT9 - 2013, XB8 - 2016, NT1 - 2017, XB808 - 2011, NT1 - 2009, NT1 PRO - 2012, XT8 - 2017, XB8 - 2015, NT1 - 2014, XB808 - 2010, NT1 - 2007, XRAY
Flat washer. ID x OD x thickness = 7mm x 10mm x 0.5mm. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, HEX SCREW SFH M3x6 (10)
7.99 €
T2'007 - US - 2007, XB8E - 2016, NT1 - 2013, XB2 Carpet - 2018, RX8 - 2011, T3 - EU - 2010, X10 GT - 2015, XB8 - 2014, NT1 WE - 2010, T4 - 2017, X1 - 2018, X12 - 2015, RX8 - 2014, XB8E - 2015, NT1 - 2014, RX8 - 2012, XB2 Carpet - 2017, T2'009 - EU - 2009, T2R - 2006, XB8 - 2005, NT1 - 2007, T3R - 2010, T4 - 2018, X12 - 2014, RX8 - 2016, XB808E - 2010, NT1 - 2015, RX8 - 2013, XB2 Carpet - 2016, T2'009 - US - 2009, NT1 - 2009, XB4 - 2018, T3 - US - 2010, T4 - 2015, NT1 EC - 2009, X12 - 2012, NT1 PRO - 2012, RX8 - 2017, XB8-TQ - 2006, X1 - 2016, X12 US - 2018, T2'007 - EU - 2007, NT1 - 2010, XB4 - 2017, T4 - 2014, T2R PRO - 2009, X10 LINK GT - 2010, NT1 - 2017, T2 - 2006, XB8-EC - 2007, X1 - 2015, X12 EU - 2018, T2'008 - EU - 2008, XT2 - 2017, NT1 - 2011, XB2 Dirt - 2017, T4 - 2013, T3 - 2011, X10 GT - 2016, NT1 - 2016, T4 - 2016, XB8 - 2016, X1 - 2017, X12 - 2017, T2'008 - US - 2008, XB8R, NT1 - 2012, XB2 Dirt - 2016, NT1R - 2010, T3 - 2012, X10 GT - 2018, XB8 - 2015, GTX - 2017, X10 GT - 2009, X12 - 2016, XRAY
M3x6 flat-head machine screw, hex drive. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, FRONT UPPER PIVOT PIN (2)
6.40 €
NT1 - 2013, NT1 WE - 2010, NT1 - 2012, NT1R - 2010, NT1 - 2011, NT1 - 2010, NT1 PRO - 2012, NT1 - 2009, NT1 EC - 2009, NT1 - 2014, NT1 - 2007, XRAY
Front upper inner pivot pins for NT1. Hardened for very high durability and long life. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
FRONT LOWER INNER PIVOT PIN (2)
9.90 €
NT1 - 2017, NT1 - 2015, NT1 - 2016, XRAY
HB,BODY SHELL,C12,MARK-1,CLEAR
In stock
+ −
Add to wish list Add to comparison list
F/R DIFF GASKET (4)
9.99 €
XB8 - 2017, XB8-2018, XB8-2019, XT8 - 2017, XB8E - 2017, XRAY
Sealing gasket for front & rear differential housings. Fits #355004 and #355005. Set of 4.
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB8'16 GRAPHITE UPPER PLATE
34.90 €
GTX - 2017, XB8E - 2017, XB8E - 2016, XB8 - 2016, XB8 - 2017, XRAY
Graphite front plate is CNC-machined from high-grade carbon graphite, ensuring highest strength with lightest weight. Redesigned to accommodate the all-new...
In stock
+ −
Add to wish list Add to comparison list
PIN 2.5x11.5 (10)
9.99 €
XB8E - 2017, GTX - 2017, XT8 - 2017, XB8 - 2017, XB8-2018, XB8-2019, XRAY
Polished chrome pin. dia. x length = 2.5mm x 11.5mm - new pins for large XB8 differentials #355004, #355005, and #355013. Set of 10.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU SHOCK BODY NUT FOR SHOCK BOOT (2)
2.60 €
XB808 - 2011, XT9 - 2013, XT8 - 2007, XB808 - 2008, XT8 - 2009, XB808 - 2009, XB808E - 2010, XB808 - 2010, XRAY
Black hardcoated aluminum shock body nut. The entire lower shock assembly is secured with the new lower aluminum shock cap which makes assembly/disassembly...
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE C-HUB RIGHT
1.99 €
XB8R, XB8-TQ - 2006, XT9 - 2013, XT8 - 2017, XB8-EC - 2007, XT8 - 2009, XB8 - 2005, XT8 - 2007, XRAY
Right-side C-hub block made from tough molded composite. Features multiple mounting positions for front upper arm. The C-hub features Xray smart I.A.C....
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE C-HUB 6° DEG. LEFT
6.99 €
XB4 - 2017, XB4 - 2014, XB4 - 2018, XB4 2WD- 2014, XB4 - 2016, XB4 - 2015, XB4 - 2013, XRAY
Molded composite C-hub for steering block. Caster pre-set at 6°. The roll center position can be easily and quickly adjusted by inserting different...
In stock
+ −
Add to wish list Add to comparison list
XRAY BALL-BEARING 5x12x4 RUBBER SEALED - GREASE (2)
8.99 €
In stock
+ −
Add to wish list Add to comparison list
XRAY, FRONT MIDDLE SHAFT - HUDY SPRING STEEL™ - LIGHTWEIGHT
29.99 €
NT1 PRO - 2012, NT1 - 2007, NT1 EC - 2009, NT1 - 2013, NT1 - 2012, NT1 - 2011, NT1R - 2010, NT1 - 2010, NT1 WE - 2010, NT1 - 2009, XRAY
For serious racers conscious of weight savings, XRAY’s new optional front middle shaft is CNC-machined from world-renowned HUDY Spring Steel™., and has been...
In stock
+ −
Add to wish list Add to comparison list
XRAY, CLUTCH BELL 21T WITH BEARINGS
7.90 €
NT18T, NT18, NT18MT, XRAY
21-tooth clutch bell for NT18 made from HUDY steel. Precision machined on a special gear machine. Includes two 4x7x2.5 bearings.
In stock
+ −
Add to wish list Add to comparison list
XRAY, XCA ALU 7075 T6 HARDCOATED PINION GEAR - 23T (2ND)
16.90 €
NT1 - 2011, NT1 - 2014, NT1 - 2012, NT1 - 2013, NT1 PRO - 2012, NT1 - 2007, NT1 - 2017, NT1 WE - 2010, NT1 - 2009, NT1 EC - 2009, NT1R - 2010, NT1 - 2015, NT1 - 2010, RX8 - 2014, NT1 - 2016, XRAY
High-strength 23T pinion gear (2nd gear) for the XRAY NT1 are made from tough 7075 T6 alu and specially hardcoated for supreme strength, light...
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE BELT PULLEY 18T - 2-SPEED-SIDE
9.99 €
NT1 - 2015, NT1 - 2009, NT1 - 2014, NT1 - 2007, NT1 - 2013, NT1 PRO - 2012, NT1 - 2012, NT1 WE - 2010, NT1 - 2011, NT1 - 2017, NT1R - 2010, NT1 EC - 2009, NT1 - 2016, NT1 - 2010, XRAY
Molded composite 18T side belt pulley on main layshaft, drives side belt.
In stock
+ −
Add to wish list Add to comparison list
XRAY, FRONT UPPER ARM BALL JOINT (2)
1.30 €
XT8 - 2007, XB8R, XB8-TQ - 2006, XT9 - 2013, XB8-EC - 2007, XT8 - 2017, XB8 - 2005, XT8 - 2009, XRAY
Front upper suspension arm inner ball joint made from tough molded composite. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY, SHOCK RUBBER MEMBRANE RIBBED (4)
4.90 €
XB9 - 2012, GTX - 2017, XB808 - 2009, XB9 - 2013, XB808E - 2010, XB808 - 2010, XB9E - 2013, XB8 - 2014, XB808 - 2011, XB8 - 2015, XT8 - 2017, XB8E - 2017, XB8 - 2016, XT9 - 2013, XT8 - 2009, XB8E - 2015, XB8 - 2017, XT8 - 2007, XB8E - 2016, XB808 - 2008, XRAY
Newly designed improved shock membranes provide more consistent feel during long finals with no sign of fade. Shock membrane for shock absorbers, made of...
In stock
+ −
Add to wish list Add to comparison list
 Prev
1 2 3 4 5 6 7 8 9 10
Next 

Pages