210 8089888

Product filters Product filters

MANUFACTURER (1)
PRICE

€  –  €

  • ‎1€
  • ‎119.99€
Reset

SPARES & OPTIONALS

All about spare parts and optional parts/tune-ups for RC car kits

Sort by Popularity
96 Per Page
XRAY, REAR MICRO SHOCK SHAFT M18T (2)
3.90 €
M18MT, M18T PRO, NT18MT, NT18T, M18T, XRAY
Hardened steel rear shock shafts (long) for M18T, highly polished for smooth shock action. Set of two.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU QUICK ROLL-CENTER HOLDER™ 4.9MM - ORANGE (2+2)
8.90 €
T3 - EU - 2010, T3 - 2011, T2'009 - US - 2009, T2'009 - EU - 2009, T3R - 2010, T3 - US - 2010, XRAY
In stock
+ −
Add to wish list Add to comparison list
XRAY, SHIM 5x7x0.2 (10)
11.99 €
NT1 - 2011, RX8 - 2011, X1 - 2015, NT1 - 2016, NT1 - 2012, RX8 - 2012, RX8 - 2017, NT1 - 2015, NT1 - 2013, RX8 - 2013, GTX - 2017, NT1 - 2014, X1 - 2017, NT1 WE - 2010, NT1 - 2007, RX8 - 2016, X1 - 2018, NT1 - 2017, NT1 - 2009, RX8 - 2014, NT1 EC - 2009, NT1 - 2010, NT1R - 2010, X1 - 2016, NT1 PRO - 2012, XRAY
XCA clutch shims. 5x7x0.2mm. Set of 10.
In stock
+ −
Add to wish list Add to comparison list
XRAY, HARDENED STEEL BRAKE PAD - LASER CUT (2)
5.99 €
NT1 - 2017, NT1 - 2010, NT1 - 2016, NT1 - 2009, NT1 - 2015, NT1 - 2007, NT1 - 2014, NT1 PRO - 2012, NT1 - 2013, NT1 WE - 2010, NT1 - 2012, NT1 EC - 2009, NT1R - 2010, NT1 - 2011, XRAY
High-precision, ultra-efficient steel brake pads for NT1 are laser cut and precision ground on both sides for an ultra-smooth surface finish to guarantee...
In stock
+ −
Add to wish list Add to comparison list
XRAY, HIGH-PERFORMANCE LOW FRICTION KEVLAR DRIVE BELT FRONT 3 x 513 MM
19.99 €
T3 - US - 2010, T3 - 2011, T4 - 2015, T2'009 - EU - 2009, T4 - 2014, T4 - 2016, T4 - 2013, T4 - 2017, T3R - 2010, T4 - 2018, T3 - 2012, T3 - EU - 2010, T2R PRO - 2009, XRAY
Optional specially-modified high-performance Kevlar®-reinforced 513mm-long, 3mm-wide front drive belt. This belt is very thin and elastic as possible for...
In stock
+ −
Add to wish list Add to comparison list
XRAY, SHOCK FOAM INSERTS (4)
1.99 €
T2'007 - US - 2007, T1 MINI, NT1 - 2009, T3 - 2011, NT1 WE - 2010, T2'008 - EU - 2008, T1 EVO2 - 2003, NT1 - 2007, T3 - 2012, NT1 PRO - 2012, T2'008 - US - 2008, T1 EVO2 - 2002, T1FK'05 - 2005, T3 - EU - 2010, NT1 EC - 2009, T2'009 - EU - 2009, T1 - 2001, T1R, T3 - US - 2010, NT1 - 2012, T2'009 - US - 2009, RX8 - 2012, T2 - 2006, T3R - 2010, NT1 - 2011, T2R - 2006, RX8 - 2011, T2'007 - EU - 2007, T1FK - 2004, NT1 - 2010, T2R PRO - 2009, NT1R - 2010, XRAY
Foam inserts for XRAY shocks, go between shock upper mount and rubber membrane. Set of 4 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE BELT PULLEY 20T - 2-SPEED-CENTER
10.99 €
NT1 - 2017, NT1 - 2010, NT1 - 2016, NT1 - 2009, NT1 - 2015, NT1 - 2007, NT1 - 2014, NT1 PRO - 2012, NT1 - 2013, NT1 WE - 2010, NT1 - 2012, NT1 EC - 2009, NT1R - 2010, NT1 - 2011, XRAY
Molded composite 20T belt pulley on main layshaft, drives rear belt.
In stock
+ −
Add to wish list Add to comparison list
XRAY 930150 CARBIDE AXIAL THRUSTBEARING F5-10 5x10x4
26.99 €
NT1 WE - 2010, NT1 - 2009, NT1R - 2010, NT1 EC - 2009, NT1 - 2010, NT1 - 2011, RX8 - 2011, RX8 - 2013, NT1 - 2012, NT1 - 2015, RX8 - 2014, NT1 - 2013, NT1 - 2016, RX8 - 2016, NT1 - 2014, NT1 PRO - 2012, RX8 - 2017, RX8 - 2012, NT1 - 2007, NT1 - 2017, XRAY
High-precision axial thrustbearing assembly for XCA clutch (5x10mm) includes carbide balls for smooth operation and long life.
In stock
+ −
Add to wish list Add to comparison list
XRAY, CONE WASHER ST 4x12 (10)
4.90 €
T1R, T1FK'05 - 2005, T1FK - 2004, T1 EVO2 - 2002, T1 EVO2 - 2003, T1 - 2001, T2 - 2006, T1 MINI, XRAY
Cone washer ID x OD x thickness = 4.2mm x 12mm x 0.4mm. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB8'16 GRAPHITE UPPER PLATE
34.90 €
XB8 - 2017, GTX - 2017, XB8E - 2017, XB8E - 2016, XB8 - 2016, XRAY
Graphite front plate is CNC-machined from high-grade carbon graphite, ensuring highest strength with lightest weight. Redesigned to accommodate the all-new...
In stock
+ −
Add to wish list Add to comparison list
XRAY 371203, X1 COMPOSITE ADJUSTABLE FRONT WING - WHITE - ETS APPROVED
19.99 €
X1 - 2015, X1 - 2018, X1 - 2017, X1 - 2016, XRAY
Optional downforce-adjustable composite front wing, approved for ETS race series. White color.
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE BEARING HUB FOR DIFF (4)
4.99 €
XB808 - 2008, XB9 - 2012, XB808 - 2010, XB8 - 2017, XB9 - 2013, XB808 - 2011, XB8 - 2016, XB9E - 2013, XB808E - 2010, XB8 - 2015, XB8E - 2015, XB8 - 2014, XB8E - 2016, RX8 - 2017, XB808 - 2009, XB8E - 2017, RX8 - 2016, XRAY
Molded composite hubs for supporting ball-bearings in diff bulkhead blocks. Set of 4.
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE REAR BODY POST HOLDER
1.90 €
NT18, M18, XRAY
Composite rear body post holder holds rear bodyposts. Designed to allow bodyposts to be set to variable heights.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU SHOCK BODY NUT FOR SHOCK BOOT (2)
2.60 €
XB808 - 2010, XB808 - 2011, XT9 - 2013, XT8 - 2007, XB808 - 2008, XT8 - 2009, XB808 - 2009, XB808E - 2010, XRAY
Black hardcoated aluminum shock body nut. The entire lower shock assembly is secured with the new lower aluminum shock cap which makes assembly/disassembly...
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE C-HUB LEFT - 0° DEG. - HARD (ECS)
9.99 €
T3 - 2011, T4 - 2013, T2'007 - EU - 2007, T3 - 2012, T4 - 2014, T2'007 - US - 2007, T2R - 2006, T4 - 2015, T2'008 - EU - 2008, T2'009 - EU - 2009, T4 - 2016, T3 - EU - 2010, T2'009 - US - 2009, T4 - 2017, T3 - US - 2010, T2'008 - US - 2008, T4 - 2018, T2R PRO - 2009, T3R - 2010, T2 - 2006, XRAY
Molded composite C-hub for left steering block. Caster pre-set at 0°. HARD rigidity for rubber-tire racing and also foam tire racing. Use with...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU ONE-PIECE ENGINE MOUNT - SWISS 7075 T6 - HARD COATED
14.90 €
XB9 - 2013, XB8 - 2014, XB9 - 2012, XB8 - 2015, XB808 - 2011, XB808 - 2010, XB808 - 2009, XT9 - 2013, XB808 - 2008, XT8 - 2009, XRAY
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE SUSPENSION ARM FRONT LOWER FOR WIRE ANTI-ROLL BAR
7.30 €
NT1 - 2017, NT1 - 2011, NT1 - 2016, NT1 - 2010, NT1 - 2015, NT1 - 2009, NT1 - 2014, NT1 - 2007, NT1 - 2013, NT1 WE - 2010, NT1 - 2012, NT1 PRO - 2012, NT1R - 2010, NT1 EC - 2009, XRAY
Front lower suspension arm made from tough molded composite material. Updated and modified to mount the new front wire anti-roll bar. Used on either left or...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ANTI-ROLL BAR REAR 1.1 MM
2.10 €
T2'009 - EU - 2009, T2R PRO - 2009, T2'008 - US - 2008, T3 - 2011, T2'008 - EU - 2008, T3 - 2012, T2'007 - US - 2007, T3 - EU - 2010, T2'007 - EU - 2007, T3 - US - 2010, T2 - 2006, T2'009 - US - 2009, T3R - 2010, T2R - 2006, XRAY
T2, T3 rear anti-roll bar, 1.1mm dia, black colour. Optional bar for #303401 Rear Anti-Roll Bar Set. Marked with 1 laser-engraved line for easy...
In stock
+ −
Add to wish list Add to comparison list
XRAY, SET OF REAR LINKAGES 2.5° TOE-IN (2)
5.90 €
NT18, M18, M18 PRO, M18 PRO LiPo, XRAY
Two rear linkages with pre-set 2.5° toe-in decreases rear toe-in, giving more top speed, and making the car more aggressive and efficient. Set includes...
In stock
+ −
Add to wish list Add to comparison list
XRAY, NUT M2.5 - SHORT (10)
4.90 €
XT8 - 2017, XB8 - 2016, XB9E - 2013, XB8 - 2015, XB9 - 2013, XB8 - 2014, XB9 - 2012, GTX - 2017, XB8E - 2017, XB8E - 2016, XB8E - 2015, XT9 - 2013, XB8 - 2017, XRAY
M2.5 short nylock nut. Set of 10.
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE STEERING BALL JOINT 6.8MM - V3 (2)
8.99 €
XB8E - 2017, GTX - 2017, XB9 - 2013, XB8E - 2016, XB9E - 2013, XB808 - 2008, XB8E - 2015, XT8 - 2017, XB8 - 2017, XB808E - 2010, XB8 - 2016, XB808 - 2011, XB8 - 2015, XB808 - 2009, XB9 - 2012, XB8 - 2014, XB808 - 2010, XRAY
Molded composite steering ball joint for use with M4 turnbuckle. Fits 6.8mm pivot ball or ball stud. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY, SET OF SUSPENSION ARMS 6° CASTER (2)
3.99 €
M18, M18 PRO LiPo, NT18, M18 PRO, XRAY
Set of 2 molded composite front upper suspension arms for XRAY M18. These new arms have the same camber (-1°) as the stock upper arms, but less caster (6°...
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE FRAME SHOCK PARTS - WIDE
2.00 €
XB8-TQ - 2006, XB8-EC - 2007, XB8 - 2005, XT8 - 2007, XB8R, XRAY
Set of composite molded parts for 2 new large-bore shock absorbers. Includes top pivots, spring top collar, spring lower collar, ball joints and shims.
In stock
+ −
Add to wish list Add to comparison list
XRAY, GRAPHITE RADIO PLATE - MULTI-FLEX
16.90 €
NT1 - 2013, XRAY
CNC-machined radio plate for NT1 made from top-quality graphite material. The radio plate now becomes a part of Multi-Flex™ set-up and allows for...
In stock
+ −
Add to wish list Add to comparison list
XRAY, CLUTCH BELL 16T WITH BEARINGS
17.99 €
NT18MT, NT18T, XRAY
16-tooth clutch bell for NT18 made from HUDY steel. Precision machined on a special gear machine. Includes two 4x7x2.5 bearings.
In stock
+ −
Add to wish list Add to comparison list
XRAY, SET OF REAR LOWER SUSPENSION ARMS M18T (2)
3.90 €
M18T, NT18MT, M18MT, NT18T, M18T PRO, XRAY
Molded rear lower suspension arms for M18T made from tough composite material. Includes mounting points for shock absorbers and anti-roll bars.
In stock
+ −
Add to wish list Add to comparison list
XRAY, REAR CENTRAL CVD DRIVE SHAFT - HUDY SPRING STEEL™
34.90 €
XB8E - 2015, XB9E - 2013, XB8 - 2017, XB8 - 2016, XB8 - 2015, XB8 - 2014, XB8E - 2017, XB9 - 2012, XB8E - 2016, XB9 - 2013, XRAY
CVD rear central drive shaft CNC-machined from world-renown HUDY Spring Steel™. Strategically-machined, lightweight drive shaft has been weight-reduced...
In stock
+ −
Add to wish list Add to comparison list
XRAY, BALL-BEARING 8x14x4 FLANGED (2)
11.99 €
RX8 - 2012, GTX - 2017, RX8 - 2013, RX8 - 2011, XRAY
High-quality flanged ball-bearings ID x OD x thickness (mm) = 8 x 14 x 4. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
Anti-Roll Bar Front Female - HUDY Spring Steel™
14.90 €
RX8, XRAY
Female front anti-roll bar CNC-machined from world-renowned HUDY Spring Steel™ for long lifespan. For use with #342450 male front anti-roll bar. The...
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE SUSPENSION ARM - FRONT LOWER - RIGHT
5.90 €
X10 GT - 2009, X12 - 2012, X10 LINK GT - 2010, XRAY
Molded composite RIGHT front lower suspension arm for XRAY XII. Marked “R” for easy identification. Use with matching left front lower suspension arm 372120.
In stock
+ −
Add to wish list Add to comparison list
F/R DIFF GASKET (4)
9.99 €
XB8E - 2017, XB8 - 2017, XB8-2018, XB8-2019, XT8 - 2017, XRAY
Sealing gasket for front & rear differential housings. Fits #355004 and #355005. Set of 4.
In stock
+ −
Add to wish list Add to comparison list
Anti-Roll Bar Front Male - HUDY Spring Steel™
14.90 €
RX8, XRAY
Male front anti-roll bar CNC-machined from world-renowned HUDY Spring Steel™ for long lifespan. For use with #342440 female front anti-roll bar. The...
In stock
+ −
Add to wish list Add to comparison list
LOW FRICTION KEVLAR DRIVE BELT 3x351MM
22.99 €
T4 2020, XRAY
Low Friction Kevlar Drive Belt 3x351mm
In stock
+ −
Add to wish list Add to comparison list
XRAY, OFFSET SPUR GEAR 78T / 48 - HARD
5.90 €
T3R - 2010, T2R - 2006, T1 EVO2 - 2002, XB2 Carpet - 2016, T2 - 2006, T4 - 2013, T2'009 - US - 2009, T1 - 2001, XB2 Carpet - 2017, T1R, T4 - 2014, T2'009 - EU - 2009, T3 - 2011, XB2 Carpet - 2018, T1FK'05 - 2005, T4 - 2015, T2'008 - US - 2008, T3 - 2012, XB2 Dirt - 2016, T1FK - 2004, T4 - 2016, T2'008 - EU - 2008, T3 - EU - 2010, XB2 Dirt - 2017, T1 MINI, T4 - 2017, T2'007 - US - 2007, T3 - US - 2010, XT2 - 2017, T2R PRO - 2009, T1 EVO2 - 2003, T4 - 2018, T2'007 - EU - 2007, XRAY
XRAY precision molded offset spur gear 78 tooth, 48 pitch. This spur gear has been strategically lightened to reduce rotating mass.
In stock
+ −
Add to wish list Add to comparison list
XRAY WASHER S 3.2 (10)
6.99 €
XB8 - 2017, NT1 - 2011, T2'008 - EU - 2008, T1 EVO2 - 2002, XT8 - 2007, M18MT, RX8 - 2012, XB8E - 2016, T3 - 2012, XB808 - 2008, NT1 - 2012, XT8 - 2009, T2'008 - US - 2008, T1 EVO2 - 2003, XB4 - 2017, M18T, RX8 - 2013, XB8E - 2017, T3 - EU - 2010, XB808 - 2009, NT1 EC - 2009, T3R - 2010, XB4 - 2016, T1 MINI, XB4 - 2018, M18T PRO, RX8 - 2014, XB9 - 2012, T3 - US - 2010, NT1 PRO - 2012, XB808 - 2010, T2'009 - US - 2009, XB4 - 2015, T1FK - 2004, XB8 - 2014, NT1 - 2007, XB9 - 2013, RX8 - 2016, T2 - 2006, NT1 WE - 2010, XB808 - 2011, T2R - 2006, XT9 - 2013, T1FK'05 - 2005, XB8 - 2015, NT1 - 2009, T2'009 - EU - 2009, RX8 - 2017, T2'007 - EU - 2007, NT1R - 2010, XB808E - 2010, T2R PRO - 2009, T1R, XB8 - 2016, NT1 - 2010, T2'007 - US - 2007, T1 - 2001, XB9E - 2013, GTX - 2017, RX8 - 2011, XB8E - 2015, T3 - 2011, XT8 - 2017, XRAY
Flat washer, 3.2mm ID. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE C-HUB RIGHT - 0° DEG. - HARD (ECS)
9.99 €
T4 - 2017, T2'009 - EU - 2009, T3 - EU - 2010, T4 - 2016, T2'008 - US - 2008, T3 - 2012, T4 - 2015, T2'008 - EU - 2008, T3 - 2011, T4 - 2014, T2'007 - US - 2007, T2R PRO - 2009, T4 - 2013, T2'007 - EU - 2007, T2R - 2006, T3R - 2010, T2 - 2006, T4 - 2018, T2'009 - US - 2009, T3 - US - 2010, XRAY
Molded composite C-hub for right steering block. Caster pre-set at 0°. HARD rigidity for rubber-tire racing and also foam tire racing. Use with...
In stock
+ −
Add to wish list Add to comparison list
XRAY BEVEL DRIVE GEAR 14T
34.99 €
XB8E - 2015, XB8 - 2017, XB8 - 2016, XB8 - 2014, XB8 - 2015, XB8E - 2017, GTX - 2017, XB8E - 2016, XRAY, XB8
In stock
+ −
Add to wish list Add to comparison list
XRAY, GRAPHITE CLUTCH SHOE - LONG LIFE (2)
32.50 €
XT8 - 2017, XB8 - 2016, XB808 - 2010, XT8 - 2009, XB8 - 2015, XB808 - 2009, XT8 - 2007, XB8 - 2014, XB808 - 2008, XB9 - 2013, XB8 - 2005, XB8-TQ - 2006, XB9 - 2012, GTX - 2017, XB8-EC - 2007, XB8R, XT9 - 2013, XB8 - 2017, XB808 - 2011, XRAY
Graphite clutch shoe made from special graphite mixture material. Provides smoother engagement and significantly less wear of alu clutch shoe. Recommended...
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE SPUR GEAR - 78T / 64P
10.99 €
X12 - 2016, X12 EU - 2018, X10 GT - 2015, X12 - 2015, X12 US - 2018, X10 GT - 2009, X12 - 2014, X1 - 2018, X12 - 2012, X1 - 2017, X10 LINK GT - 2010, X1 - 2016, X10 GT - 2018, X12 - 2017, X1 - 2015, X10 GT - 2016, XRAY
Precision-moulded composite spur gear 78 tooth, 64-pitch. Popular sizes available.
In stock
+ −
Add to wish list Add to comparison list
FRONT LOWER INNER PIVOT PIN (2)
9.90 €
NT1 - 2016, NT1 - 2017, NT1 - 2015, XRAY
HB,BODY SHELL,C12,MARK-1,CLEAR
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 COMPOSITE PINION SEAL (2)
1.50 €
XB808 - 2009, XB808 - 2008, XB808E - 2010, XB808 - 2010, XRAY
Composite molded seal for the XB808 pinion gear. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY, FRONT MIDDLE SHAFT - HUDY SPRING STEEL™ - LIGHTWEIGHT
29.99 €
NT1 WE - 2010, NT1 - 2009, NT1 PRO - 2012, NT1 - 2007, NT1 EC - 2009, NT1 - 2013, NT1 - 2012, NT1 - 2011, NT1R - 2010, NT1 - 2010, XRAY
For serious racers conscious of weight savings, XRAY’s new optional front middle shaft is CNC-machined from world-renowned HUDY Spring Steel™., and has been...
In stock
+ −
Add to wish list Add to comparison list
XRAY, C-HUB LEFT
1.99 €
XB8R, XB8-TQ - 2006, XB8-EC - 2007, XB8 - 2005, XT8 - 2017, XT8 - 2009, XT9 - 2013, XT8 - 2007, XRAY
Left-side C-hub block made from tough molded composite. Features multiple mounting positions for front upper arm. The C-hub features Xray smart I.A.C....
In stock
+ −
Add to wish list Add to comparison list
XRAY, Inner Driveshaft Adapter (2)
5.50 €
M18T, N18T, XRAY
Hardcoated duraluminum dual-slotted outdrives for use with M18 front one-way differential #385101. The outdrives are specially lightened for increased...
In stock
+ −
Add to wish list Add to comparison list
XRAY, RUBBER TIRES + INSERTS, FRONT (50DEG)
11.90 €
NT18, M18, XRAY
Front rubber tires and inserts for M18. 50deg front tires are harder than stock kit front tires (40deg) for decreased front traction. Set of two...
In stock
+ −
Add to wish list Add to comparison list
XRAY, BALL-BEARING 4x7x2.5 (2)
3.90 €
NT18MT, X1 - 2017, M18 PRO, T2'008 - US - 2008, T3R - 2010, NT18T, T4 - 2018, M18 PRO LiPo, T2 - 2006, T3 - US - 2010, T1 - 2001, T4 - 2017, M18MT, T2'007 - EU - 2007, T2R PRO - 2009, T1 EVO2 - 2002, T1R, M18T, T2'007 - US - 2007, T3 - EU - 2010, T1 EVO2 - 2003, T1FK'05 - 2005, M18T PRO, T2'008 - EU - 2008, T2R - 2006, T1 MINI, T4 - 2016, NT18, T1FK - 2004, X1 - 2018, T2'009 - EU - 2009, T2'009 - US - 2009, T4 - 2015, XRAY
High-quality ball-bearings ID x OD x thickness (mm) = 4x7x2.5mm. Set of 2 pieces. These ball-bearings are degreased and lightly oiled with AeroShell...
In stock
+ −
Add to wish list Add to comparison list
XRAY, WASHER S 7x10x0.5 (10)
9.99 €
NT1 - 2009, NT1 PRO - 2012, XT8 - 2017, XB8 - 2015, NT1 - 2014, XB808 - 2010, NT1 - 2007, XT8 - 2009, NT1 - 2016, XB8 - 2014, NT1 WE - 2010, XB808 - 2009, NT1 - 2012, XT8 - 2007, GTX - 2017, RX8 - 2017, RX8 - 2014, XB808 - 2008, NT1 - 2015, XB9E - 2013, NT1 - 2011, RX8 - 2016, RX8 - 2013, XB8-EC - 2007, NT1 EC - 2009, XB9 - 2013, NT1 - 2013, RX8 - 2012, XB8 - 2017, RX8 - 2011, XB9 - 2012, NT1 - 2010, NT1R - 2010, XT9 - 2013, XB8 - 2016, NT1 - 2017, XB808 - 2011, XRAY
Flat washer. ID x OD x thickness = 7mm x 10mm x 0.5mm. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE ANTI-ROLL BAR BALL JOINT 5.8 MM (4)
6.99 €
NT1R - 2010, NT1 EC - 2009, RX8 - 2011, NT1 - 2007, NT1 PRO - 2012, NT1 - 2010, NT1 - 2011, NT1 - 2009, NT1 - 2012, RX8 - 2012, NT1 - 2013, NT1 WE - 2010, RX8 - 2013, NT1 - 2014, XRAY
Molded composite 5.8mm ball joints for rear anti-roll bar linkages. Set of 4.
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 COMPOSITE STEERING BLOCK LEFT - MOULDED-IN STEEL BUSHING
3.50 €
XB808E - 2010, XB808 - 2011, XB808 - 2010, XB808 - 2009, XB9 - 2013, XB808 - 2008, XB9 - 2012, XB9E - 2013, XRAY
Left-side steering block for XB808, molded from a lightweight yet very strong and durable composite material.  The super-lightweight composite...
In stock
+ −
Add to wish list Add to comparison list
XRAY, SET OF ECCENTRIC COMPOSITE HUBS "1" FOR BULKHEADS (4+2)
1.90 €
T2R PRO - 2009, T3R - 2010, T2'008 - US - 2008, T2'008 - EU - 2008, T3 - 2011, T3 - 2012, T2'009 - EU - 2009, T3 - EU - 2010, T2'009 - US - 2009, T3 - US - 2010, XRAY
Set of 1mm-offset molded composite eccentric hubs support ball-bearings for differentials (4 hubs) and center layshaft (2 hubs). Fits XRAY T2’008,...
In stock
+ −
Add to wish list Add to comparison list
ALU ADJUSTING NUT M15x1 (2)
7.50 €
XB8 - 2015, XB8 - 2014, GTX - 2017, XB8E - 2017, XB8E - 2016, XB8 - 2017, XB8E - 2015, XB8 - 2016, XRAY
In stock
+ −
Add to wish list Add to comparison list
XRAY, DRIVE SHAFT REPLACEMENT PLASTIC CAP 3.5 MM (4)
7.99 €
T4 - 2013, T4 - 2017, T2'009 - US - 2009, T3R - 2010, T4 - 2018, T2'009 - EU - 2009, T3 - US - 2010, T2'008 - US - 2008, T3 - EU - 2010, T2'008 - EU - 2008, T3 - 2012, T4 - 2015, T3 - 2011, T4 - 2014, T4 - 2016, T2R PRO - 2009, XRAY
Low friction 3.5mm drive pin clips for protection and cushioning of drive shaft pin in diff outdrives. Set of 4. For use only with XRAY T2'008 alu...
In stock
+ −
Add to wish list Add to comparison list
XRAY, HEX SCREW SH M3x8 (10)
7.99 €
XB8 - 2017, NT1 PRO - 2012, T1R, X10 GT - 2016, T3 - US - 2010, XB2 Dirt - 2016, NT1 - 2012, XT8 - 2017, XB808 - 2010, RX8 - 2016, X12 - 2017, NT1 - 2010, T2'009 - US - 2009, XB8R, T4 - 2018, XB8 - 2016, NT1 WE - 2010, T2 - 2006, X10 GT - 2018, XT8 - 2009, T3R - 2010, XB2 Dirt - 2017, T1 EVO2 - 2002, XB808 - 2009, RX8 - 2017, XB4 2WD- 2014, X12 EU - 2018, NT1R - 2010, T2R - 2006, XB8E - 2017, X1 - 2015, XB8-EC - 2007, NT1 - 2016, T2'007 - EU - 2007, X10 LINK GT - 2010, XT8 - 2007, T4 - 2013, XB4 - 2013, T1 EVO2 - 2003, XB808 - 2008, T1 - 2001, XB8 - 2014, X12 US - 2018, NT1 - 2013, T2R PRO - 2009, XB8E - 2016, X1 - 2016, X12 - 2012, XB4 - 2018, NT1 - 2015, T2'007 - US - 2007, XT2 - 2017, T4 - 2014, XB4 - 2014, XB8 - 2015, T1 MINI, XB8-TQ - 2006, RX8 - 2011, T3 - 2011, XB2 Carpet - 2016, NT1 - 2017, XB8E - 2015, X1 - 2017, X12 - 2014, NT1 - 2007, T2'008 - EU - 2008, XB9E - 2013, T4 - 2015, XB4 - 2015, XB8 - 2005, T1FK - 2004, X10 GT - 2009, RX8 - 2012, T3 - 2012, XB2 Carpet - 2017, NT1 EC - 2009, XB808E - 2010, X1 - 2018, X12 - 2015, NT1 - 2009, T2'008 - US - 2008, XB9 - 2013, T4 - 2016, XB4 - 2016, RX8 - 2013, NT1 - 2014, T1FK'05 - 2005, X10 GT - 2015, T3 - EU - 2010, XB2 Carpet - 2018, GTX - 2017, XT9 - 2013, XB808 - 2011, RX8 - 2014, X12 - 2016, NT1 - 2011, T2'009 - EU - 2009, XB9 - 2012, T4 - 2017, XB4 - 2017, XRAY
M3x8 button-head machine screw, hex drive. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 COMPOSITE STEERING BLOCK RIGHT - MOULDED-IN STEEL BUSHING
3.50 €
XB808 - 2009, XB808 - 2008, XB808E - 2010, XB9 - 2012, XB808 - 2011, XB9 - 2013, XB808 - 2010, XB9E - 2013, XRAY
Right-side steering block for XB808, molded from a lightweight yet very strong and durable composite material.   The super-lightweight...
In stock
+ −
Add to wish list Add to comparison list
XRAY, CONE WASHER ST 4x10 (10)
4.99 €
T1FK - 2004, T1 EVO2 - 2003, T1 MINI, T1 EVO2 - 2002, T1R, T1 - 2001, T1FK'05 - 2005, XRAY
Cone washer ID x OD x thickness = 4.2mm x 10mm x 0.4mm. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, NARROW ALU PINION GEAR - HARD COATED 18T / 64
9.99 €
T1 EVO2 - 2003, T1R, X10 LINK GT - 2010, X1 - 2015, T3 - EU - 2010, X10 GT - 2009, T1 EVO2 - 2002, X12 - 2012, T2 - 2006, T2'009 - US - 2009, T4 - 2015, T4 - 2013, X1 - 2017, T1 - 2001, X12 - 2014, T2'007 - EU - 2007, T1FK'05 - 2005, X12 US - 2018, T2R PRO - 2009, X1 - 2016, T1FK - 2004, X12 - 2015, T2'007 - US - 2007, T1 MINI, X12 EU - 2018, T4 - 2014, T4 - 2016, T3 - 2011, X10 GT - 2016, T2'008 - EU - 2008, X12 - 2017, T3 - 2012, T4 - 2017, T3R - 2010, X10 GT - 2015, T2'008 - US - 2008, X12 - 2016, T2R - 2006, X10 GT - 2018, T4 - 2018, T3 - US - 2010, X1 - 2018, T2'009 - EU - 2009, XRAY
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the...
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE BELT PULLEY 19T - MID-CENTER
10.99 €
NT1 - 2017, NT1 - 2009, NT1 - 2016, NT1 - 2007, NT1 - 2015, NT1 - 2011, NT1 - 2014, NT1 PRO - 2012, NT1 - 2013, NT1 WE - 2010, NT1 - 2012, NT1 EC - 2009, NT1R - 2010, NT1 - 2010, XRAY
Molded composite 19T front belt pulley on middle shaft, drives front belt.
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 COMPOSITE CASTER BLOCK 14° LEFT - HAND MODIFIED
3.99 €
XB9 - 2012, XB808E - 2010, XB808 - 2011, XB808 - 2010, XB808 - 2009, XB9E - 2013, XB808 - 2008, XB9 - 2013, XRAY
Left-side 14° caster block for XB808 made from tough molded composite. Hand-modified with the artisan skills of experienced XRAY craftsmen. The preset...
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 ALU BEARING COLLAR FOR 3 DIFF BEARINGS (2)
2.30 €
XB808 - 2008, XB808E - 2010, XB808 - 2009, XB808 - 2010, XRAY
Alu collar provides even spacing between bearings within front/rear XB808 diff bulkhead blocks. With capturing screws tightened, both bearings are...
In stock
+ −
Add to wish list Add to comparison list
XRAY, DRIVE SHAFT COUPLING - SPRING STEEL (2)
3.30 €
T1 EVO2 - 2002, T1FK - 2004, T1 - 2001, T1FK'05 - 2005, T1R, T1 MINI, T1 EVO2 - 2003, XRAY
Hudy Spring Steel drive shaft coupling, works in front and rear drive shafts. Specially hand-ground for maximum precision. Set of two.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU REAR CVD DRIVE AXLE - SWISS 7075 T6 - HARD COATED
9.99 €
RX8 - 2013, RX8 - 2012, RX8 - 2016, RX8 - 2011, RX8 - 2017, RX8 - 2014, XRAY
CNC-machined CVD drive axle for RX8 made from premium lightweight Swiss 7075 T6 hardcoated aluminum. Strategically-machined, super-lightweight drive axles...
In stock
+ −
Add to wish list Add to comparison list
XRAY, DIFF PIN (2)
2.40 €
XT9 - 2013, GTX - 2017, XB8R, XB808 - 2008, XB8 - 2005, XB9 - 2012, XB808 - 2009, XB8 - 2014, XB9 - 2013, XB808 - 2010, XB8 - 2015, XB9E - 2013, XB808 - 2011, XB8 - 2016, XT8 - 2007, XB8E - 2015, XB8-EC - 2007, XT8 - 2009, XB808E - 2010, XB8E - 2016, XB8-TQ - 2006, XRAY
Precision-ground polished steel pins for differential internal satellite gears. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY O-RING 12.1 x 1.6 (10)
7.00 €
RX8 - 2014, X1 - 2016, NT1 - 2010, T2'007 - US - 2007, XT8 - 2017, XB8-EC - 2007, T2R PRO - 2009, NT1 - 2017, XB8E - 2017, RX8 - 2012, X1 - 2015, XT8 - 2009, NT1 - 2009, T2'007 - EU - 2007, T1 EVO2 - 2003, XB8 - 2017, T2R - 2006, NT1 - 2016, XB8E - 2016, RX8 - 2011, T3R - 2010, XT8 - 2007, NT1 - 2007, T2 - 2006, T1 EVO2 - 2002, XB8 - 2016, T2'009 - US - 2009, NT1 - 2015, XB8E - 2015, T3 - US - 2010, NT1R - 2010, XB9E - 2013, GTX - 2017, T1R, T1 - 2001, XB8 - 2015, NT1 - 2014, T2'009 - EU - 2009, XB808E - 2010, T3 - EU - 2010, NT1 WE - 2010, XB9 - 2013, T1FK'05 - 2005, RX8 - 2017, XB8 - 2014, NT1 - 2012, T2'008 - US - 2008, XB808 - 2011, T3 - 2012, NT1 PRO - 2012, XB9 - 2012, T1FK - 2004, RX8 - 2016, XB8 - 2005, NT1 - 2011, T2'008 - EU - 2008, XT9 - 2013, XB8-TQ - 2006, T3 - 2011, NT1 EC - 2009, XB8R, T1 MINI, XRAY
Rubber O-ring fits over 12mm shaft. 1.6mm thick. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, NARROW ALU PINION GEAR - HARD COATED 18T / 48
13.99 €
T3 - EU - 2010, T2'007 - US - 2007, T2R - 2006, T1FK'05 - 2005, T4 - 2013, T2'008 - EU - 2008, T2R PRO - 2009, T1R, T4 - 2014, T1 - 2001, T3 - 2011, T2 - 2006, T4 - 2015, T1 EVO2 - 2002, T3 - 2012, T2'007 - EU - 2007, T4 - 2016, T1 EVO2 - 2003, T3 - US - 2010, T2'009 - EU - 2009, T4 - 2017, T1 MINI, T3R - 2010, T2'008 - US - 2008, T2'009 - US - 2009, T4 - 2018, T1FK - 2004, XRAY
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the...
In stock
+ −
Add to wish list Add to comparison list
XRAY, BALL STUD 5.8MM WITH BACKSTOP - V2 (2)
6.00 €
XB8-EC - 2007, XT8 - 2007, XB8 - 2005, XT8 - 2009, XT9 - 2013, XB8R, XB8-TQ - 2006, XRAY
Ball stud 5.8mm with backstop. Recommended for installation on steering blocks to prevent the steering linkages from disconnecting after a heavy...
In stock
+ −
Add to wish list Add to comparison list
XRAY, FRONT TQ LOWER SUSPENSION ARM
3.50 €
XB8 - 2005, XB8R, XB8-TQ - 2006, XB8-EC - 2007, XRAY
The redesigned front lower suspension arms with all new special profile provide higher stiffness and rigidity to prevent bending of the arm under extreme...
In stock
+ −
Add to wish list Add to comparison list
XRAY, BALL-BEARING 3x6x2.5 (2)
4.99 €
XB2 Dirt - 2016, T4 - 2014, T3 - 2011, XB2 Carpet - 2018, T3 - US - 2010, T4 - 2016, XB2 Carpet - 2017, T3 - EU - 2010, T4 - 2015, XB2 Carpet - 2016, T4 - 2018, XT2 - 2017, T4 - 2013, T4 - 2017, XB2 Dirt - 2017, T3 - 2012, T3R - 2010, XRAY
High-quality ball-bearings, 13x6x2.5mm. Set of 2.  These ball-bearings are degreased and lightly oiled with AeroShell™ Fluid 12 oil for maximum...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU SHOCK BODY (2)
14.90 €
NT1 - 2017, RX8 - 2014, NT1 - 2015, NT1 - 2016, RX8 - 2017, NT1 - 2014, RX8 - 2016, XRAY
CNC-machined externally-threaded shock bodies made from premium Swiss 7075 T6 aluminum and hardened for maximum life. Redesigned for improved traction and...
In stock
+ −
Add to wish list Add to comparison list
XRAY, GEARBOX CASE M18T
5.90 €
M18MT, M18T PRO, NT18MT, NT18T, M18T, XRAY
Molded gearbox case set for M18T made from tough composite material. Includes upper and lower cases.
In stock
+ −
Add to wish list Add to comparison list
PIN 2.5x11.5 (10)
9.99 €
XB8-2019, XB8E - 2017, GTX - 2017, XT8 - 2017, XB8 - 2017, XB8-2018, XRAY
Polished chrome pin. dia. x length = 2.5mm x 11.5mm - new pins for large XB8 differentials #355004, #355005, and #355013. Set of 10.
In stock
+ −
Add to wish list Add to comparison list
XRAY, HIGH-SPEED BALL-BEARING 8x16x5 RUBBER SEALED (2)
9.99 €
XT8 - 2017, GTX - 2017, XB8 - 2017, XB8E - 2016, XT9 - 2013, XB808E - 2010, XB9 - 2012, XB808 - 2010, XB808 - 2011, XB9 - 2013, XB8-TQ - 2006, XB8R, XB9E - 2013, XB8 - 2005, XB8E - 2017, XT8 - 2007, XB8 - 2015, XB8-EC - 2007, XT8 - 2009, XB8 - 2016, XB8 - 2014, XB8E - 2015, XRAY
New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 8x16x5. Set of 2 pieces. Top-quality professional...
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE FRONT BRACE
2.90 €
XB9 - 2012, XB8E - 2015, XB8 - 2015, XB8 - 2014, XB9E - 2013, XB9 - 2013, XRAY
Front brace made from tough molded composite. Using the composite brace makes the car more flexible and forgiving, making it easier to drive....
In stock
+ −
Add to wish list Add to comparison list
XRAY, HEX SCREW SFH M2x6 - STAINLESS (10)
8.99 €
NT1 WE - 2010, NT1 - 2013, NT1 PRO - 2012, NT1 - 2014, NT1 EC - 2009, NT1 - 2007, NT1 - 2017, NT1 - 2012, NT1 - 2016, NT1 - 2015, NT1 - 2010, NT1R - 2010, NT1 - 2011, NT1 - 2009, XRAY
M2x6 flat-head machine screw, hex drive. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ANTI-ROLL BAR FRONT 1.2 MM
1.90 €
T2'009 - EU - 2009, T2R PRO - 2009, T2'009 - US - 2009, T3 - 2011, T2'008 - US - 2008, T3 - 2012, T2 - 2006, T3 - EU - 2010, T2'007 - EU - 2007, T3 - US - 2010, T2'007 - US - 2007, T2R - 2006, T3R - 2010, T2'008 - EU - 2008, XRAY
T2 front anti-roll bar, 1.2mm dia, gold colour. Same bar as included in #302401 T2 Front Anti-Roll Bar Set.
In stock
+ −
Add to wish list Add to comparison list
XRAY, REAR TURNBUCKLE L/R 26 MM - HUDY SPRING STEEL (2)
8.90 €
T3R - 2010, T3 - EU - 2010, T1 EVO2 - 2003, T2'008 - US - 2008, T4 - 2013, T3 - 2012, T1 EVO2 - 2002, T2'008 - EU - 2008, T4 - 2014, T3 - 2011, T1 - 2001, T2'007 - US - 2007, T4 - 2015, T2R PRO - 2009, RX8 - 2013, T2'007 - EU - 2007, T4 - 2016, T2R - 2006, RX8 - 2012, T2 - 2006, T4 - 2017, T2'009 - US - 2009, RX8 - 2011, T3 - US - 2010, T1FK - 2004, T4 - 2018, T2'009 - EU - 2009, XRAY
Set of two adjustable turnbuckle for adjusting camber of rear uprights, manufactured from world-renowned top-secret "Hudy Spring Steel".
In stock
+ −
Add to wish list Add to comparison list
XRAY BALL-BEARING 5x12x4 RUBBER SEALED - GREASE (2)
8.99 €
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 COMPOSITE CASTER BLOCK 14° RIGHT - HAND MODIFIED
3.99 €
XB808E - 2010, XB808 - 2011, XB808 - 2009, XB808 - 2010, XB9 - 2013, XB808 - 2008, XB9 - 2012, XB9E - 2013, XRAY
Right-side 14° caster block for XB808 made from tough molded composite. Hand-modified with the artisan skills of experienced XRAY craftsmen. The preset...
In stock
+ −
Add to wish list Add to comparison list
REAR SPRING-SET - 1 DOT (2)
8.90 €
XB2 Carpet - 2017, XB4 - 2015, XB2 Carpet - 2018, XB4 2WD- 2014, XB2 Dirt - 2016, XB4 - 2018, XB2 Dirt - 2017, XB4 - 2017, XB4 - 2013, XB4 - 2016, XB4 - 2014, XB2 Carpet - 2016, XT2 - 2017, XRAY
The springs have been specifically designed to complement the big bore shocks. Set of 2. The spring rate of the linear springs is constant during the entire...
In stock
+ −
Add to wish list Add to comparison list
XRAY, RELIEF STEERING BALL JOINT 5.8MM FOR M4 (2)
1.50 €
XT8 - 2009, XT9 - 2013, XT8 - 2007, XRAY
Molded composite relief steering ball joint for mounting on M4 turnbuckle, attaches to 5.8mm pivot ball. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY WASHER S 2.2 (10)
7.40 €
XB8-TQ - 2006, XB9 - 2013, XB8 - 2015, M18T PRO, XB808 - 2008, XB808 - 2011, XB808 - 2010, NT18, XB808 - 2009, XB8R, XT8 - 2017, NT18MT, XB8 - 2016, XB9 - 2012, XT9 - 2013, NT18T, XT8 - 2007, GTX - 2017, XB8 - 2017, XB8 - 2005, M18MT, XB8-EC - 2007, XT8 - 2009, XB8 - 2014, M18T, XRAY
Flat washer, 2.2mm ID. Set of 10 pieces
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 COMPOSITE SERVO SAVER
1.90 €
XB808 - 2010, XB808 - 2011, XB808E - 2010, XB808 - 2009, XB808 - 2008, XRAY
Molded composite parts for XB808 servo saver.
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 COMPOSITE SET OF SHIMS FOR SHOCKS 1 & 2.5 MM
1.50 €
XB808 - 2011, XB808E - 2010, XB808 - 2009, XB808 - 2010, XT8 - 2009, XB808 - 2008, XT8 - 2007, XRAY
Set of composite molded shims for XB808 shocks. Includes 1.0 & 2.5mm sizes.
In stock
+ −
Add to wish list Add to comparison list
XRAY, HEX SCREW SFH M3x6 (10)
7.99 €
NT1R - 2010, X12 - 2017, T3 - 2012, T2'008 - US - 2008, XB8R, XB2 Dirt - 2016, GTX - 2017, X10 GT - 2018, X10 GT - 2009, XB8 - 2015, NT1 - 2013, RX8 - 2011, X12 - 2016, XB8E - 2016, T3 - EU - 2010, T2'007 - US - 2007, T4 - 2017, XB2 Carpet - 2018, NT1 WE - 2010, X10 GT - 2015, X1 - 2018, XB8 - 2014, NT1 - 2014, RX8 - 2012, X12 - 2015, XB8E - 2015, T2R - 2006, RX8 - 2014, T3R - 2010, XB2 Carpet - 2017, NT1 - 2007, T2'009 - EU - 2009, T4 - 2018, XB8 - 2005, NT1 - 2015, X12 - 2014, RX8 - 2013, XB808E - 2010, NT1 - 2009, RX8 - 2016, T4 - 2015, XB2 Carpet - 2016, T3 - US - 2010, NT1 EC - 2009, T2'009 - US - 2009, XB4 - 2018, NT1 PRO - 2012, X12 - 2012, X1 - 2016, XB8-TQ - 2006, NT1 - 2010, RX8 - 2017, T4 - 2014, X12 US - 2018, T2R PRO - 2009, T2'007 - EU - 2007, XB4 - 2017, NT1 - 2017, X10 LINK GT - 2010, X1 - 2015, XB8-EC - 2007, NT1 - 2011, T2 - 2006, T4 - 2013, X12 EU - 2018, T3 - 2011, T2'008 - EU - 2008, XT2 - 2017, XB2 Dirt - 2017, NT1 - 2016, X10 GT - 2016, X1 - 2017, XB8 - 2016, NT1 - 2012, T4 - 2016, XRAY
M3x6 flat-head machine screw, hex drive. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, GLUED BRAKE PAD SET - ULTRA-EFFICIENT (4)
59.99 €
XT8 - 2007, XB8 - 2005, XB808 - 2008, XB9 - 2013, XB8 - 2014, XB8-TQ - 2006, XB9 - 2012, GTX - 2017, XB8-EC - 2007, XB8R, XT8 - 2017, XB8 - 2017, XB808 - 2011, XT9 - 2013, XB8 - 2016, XB808 - 2010, XT8 - 2009, XB8 - 2015, XB808 - 2009, XRAY
Factory pre-assembled brake pad set for consistent and precise braking. High-precision, ultra-efficient steel brake pads are CNC-machined and precision...
In stock
+ −
Add to wish list Add to comparison list
XRAY, HIGH-PERFORMANCE KEVLAR DRIVE BELT FRONT 5.0 x 186 MM - V2
19.99 €
NT1 - 2014, NT1 - 2012, NT1 - 2009, NT1 - 2007, NT1 EC - 2009, NT1 - 2010, NT1 - 2017, NT1 PRO - 2012, NT1 - 2016, NT1 WE - 2010, NT1 - 2015, NT1 - 2011, NT1R - 2010, NT1 - 2013, XRAY
High-performance Kevlar®-reinforced front drive belt 5.0 x 186mm.
In stock
+ −
Add to wish list Add to comparison list
XRAY, DRIVE SHAFT COUPLING - HUDY SPRING STEEL
12.99 €
T3 - US - 2010, NT1 WE - 2010, XB4 2WD- 2014, T4 - 2017, T2'009 - EU - 2009, XB2 Dirt - 2017, T3 - EU - 2010, XB4 - 2018, NT1 PRO - 2012, NT1 - 2012, T4 - 2016, T2'008 - US - 2008, XB2 Dirt - 2016, T3 - 2012, XB4 - 2017, NT1 - 2017, NT1 - 2011, T4 - 2015, T2'008 - EU - 2008, XB2 Carpet - 2018, T3 - 2011, XB4 - 2016, NT1 - 2016, NT1 - 2010, T4 - 2014, T2'007 - US - 2007, XB2 Carpet - 2017, T2R PRO - 2009, XB4 - 2015, NT1 - 2015, NT1 - 2009, T4 - 2013, T2'007 - EU - 2007, XB2 Carpet - 2016, T2R - 2006, XB4 - 2014, NT1 - 2014, T3R - 2010, T2 - 2006, XT2 - 2017, T4 - 2018, T2'009 - US - 2009, XB4 - 2013, NT1 - 2013, XRAY
Hudy Spring Steel™ drive shaft coupling for Set Screw for increased reliability, works in front and rear CVD drive shafts of XRAY T2, T3. Specially...
In stock
+ −
Add to wish list Add to comparison list
XRAY, BEVEL DRIVE GEAR 10T
5.80 €
XB808 - 2009, XT9 - 2013, XB808 - 2010, XB808 - 2011, XB808 - 2008, XT8 - 2007, XT8 - 2017, XB808E - 2010, XT8 - 2009, XRAY
10-tooth bevel drive gear for front/rear differential. Precision machined on a special gear machine.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU DIFF PIN - HARD COATED (2)
2.30 €
XT9 - 2013, XB8-TQ - 2006, XB8E - 2015, XT8 - 2009, XB808 - 2008, XB808E - 2010, XB9 - 2013, XB808 - 2009, XB8 - 2014, XB9E - 2013, XB808 - 2010, XB8 - 2015, XT8 - 2007, XB808 - 2011, XB8 - 2016, XB8E - 2016, XB9 - 2012, XB8 - 2005, XB8-EC - 2007, XB8R, XRAY
Alu hardcoated pins for gear differential are CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long life....
In stock
+ −
Add to wish list Add to comparison list
XRAY, ADJ. TURNBUCKLE M5 L/R 28 MM - HUDY SPRING STEEL (2)
3.50 €
XB8 - 2015, XB8E - 2015, XB8 - 2014, XRAY
Adjustable left & right M5 turnbuckles manufactured from special blend of HUDY Spring Steel™ which is specifically formulated for turnbuckles. These...
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE C-HUB 6° DEG. LEFT
6.99 €
XB4 - 2013, XB4 - 2017, XB4 - 2014, XB4 - 2018, XB4 2WD- 2014, XB4 - 2016, XB4 - 2015, XRAY
Molded composite C-hub for steering block. Caster pre-set at 6°. The roll center position can be easily and quickly adjusted by inserting different...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU SHOCK BODY ADJ. NUT (2)
6.60 €
XB9 - 2012, GTX - 2017, XB808 - 2009, XB8E - 2017, XB9E - 2013, XB808 - 2008, XB8E - 2016, XT8 - 2007, XB8 - 2017, XB8E - 2015, XT8 - 2009, XB8 - 2016, XB808E - 2010, XT8 - 2017, XB8 - 2015, XB808 - 2011, XT9 - 2013, XB9 - 2013, XB8 - 2014, XB808 - 2010, XRAY
CNC-machined shock spring adjustment collar for shock absorbers, made from premium lightweight 7075 T6 aluminum. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE REAR BRACE - LONG - V2
4.60 €
XB8R, XT8 - 2007, XB8E - 2015, XT8 - 2009, XB8-TQ - 2006, XT9 - 2013, XB8-EC - 2007, XB8 - 2015, XB9E - 2013, XB8 - 2014, XB9 - 2013, XB8 - 2005, XRAY
Rear brace made from tough molded composite. Using the composite brace will make the car more flexible and more forgiving, thus making the car easier to...
In stock
+ −
Add to wish list Add to comparison list
UNIVERSAL DRIVE SHAFT - HUDY SPRING STEEL™
44.20 €
XB8-2018, XB8 - 2017, XB8 - 2016, XB8E - 2017, XB8E - 2016, XB8-2019, XRAY
All-new front & rear universal drive shafts are used on the XB8 to generate more traction and have less resistance in the front when maximum steering...
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 ALU CASTER BLOCK 14° LEFT - SWISS 7075 T6 - HARD COATED --- Replaced with #352284
13.99 €
XB808E - 2010, XB808 - 2010, XB808 - 2011, XB808 - 2009, XB9 - 2013, XB808 - 2008, XB9 - 2012, XB9E - 2013, XRAY
Authentic XRAY left-side 14° alu caster block for XB808 is CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life....
In stock
+ −
Add to wish list Add to comparison list
XRAY, SCREW FOR EXTERNAL DIFF ADJUSTMENT - HUDY SPRING STEEL™
1.90 €
T1 - 2001, T3 - US - 2010, T1R, T2'009 - EU - 2009, T3 - EU - 2010, T1FK'05 - 2005, T2'008 - US - 2008, T3 - 2012, T1FK - 2004, T2'008 - EU - 2008, T3 - 2011, T1 MINI, T2'007 - US - 2007, T2R PRO - 2009, T1 EVO2 - 2003, T2'007 - EU - 2007, T2R - 2006, T1 EVO2 - 2002, T3R - 2010, T2 - 2006, T2'009 - US - 2009, XRAY
Special screw for external diff adjustment. Manufactured exclusively by HUDY from world-renowned top-secret "Hudy Spring Steel".
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE SOLID AXLE ADAPTER
4.99 €
NT1 - 2016, NT1 - 2010, NT1 - 2015, NT1 - 2009, NT1 - 2014, NT1 - 2007, NT1 - 2013, NT1 PRO - 2012, NT1 - 2012, NT1 WE - 2010, NT1 - 2011, NT1 - 2017, NT1R - 2010, NT1 EC - 2009, XRAY
Molded composite adapter to convert #335000 front gear differential into a solid front axle. Used to replace internal bevel and satellite gears.
In stock
+ −
Add to wish list Add to comparison list
 Prev
1 2 3 4 5 6 7 8 9
Next