210 8089888

XRAY

https://www.teamxray.com/

Sort by Popularity
96 Per Page
XRAY, HIGH-SPEED BALL-BEARING 1/4"x3/8"x1/8" RUBBER SEALED (2)
6.99 €
X12 - 2015, X1 - 2018, X10 LINK GT - 2010, X12 - 2014, X10 GT - 2009, X12 - 2012, X10 GT - 2015, X10 GT - 2016, X12 - 2016, X1 - 2015, X12 - 2017, X1 - 2016, X12 US - 2018, X12 EU - 2018, X1 - 2017, X10 GT - 2018, XRAY
High-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (") = 1/4" x 3/8" x 1/8". Set of 2 pieces....
In stock
+ −
Add to wish list Add to comparison list
XRAY, HARDENED PISTON RODS FOR KEYED PISTONS (2)
3.90 €
T1 EVO2 - 2003, T1 EVO2 - 2002, T1R, T1FK'05 - 2005, T1 MINI, T1FK - 2004, XRAY
Set of two keyed rear piston rods for use with XRAY shock absorbers. (All four XRAY shock absorbers use the same parts.) NOTE: These piston rods are NOT...
In stock
+ −
Add to wish list Add to comparison list
BALL-BEARING 3x8x4 (2)
4.99 €
XB2 Carpet - 2017, XB2 Carpet - 2018, XB2 Dirt - 2016, XT2 - 2017, XB2 Dirt - 2017, XB2 Carpet - 2016, XRAY
High-quality ball-bearings, 3x8x4mm. Set of 2. These ball-bearings are degreased and lightly oiled with AeroShell™ Fluid 12 oil for maximum smoothness,...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ANTI-ROLL BAR REAR 2.6 MM
9.99 €
NT1 - 2009, NT1 EC - 2009, NT1 - 2007, NT1 - 2014, NT1 - 2013, NT1 - 2012, NT1R - 2010, NT1 - 2011, NT1 WE - 2010, NT1 - 2010, NT1 PRO - 2012, XRAY
Tough steel rear anti-roll bar wire 2.6mm for precision tuning of the stock rear anti-roll bar. Wide range of bar thicknesses provides great tuning...
In stock
+ −
Add to wish list Add to comparison list
XRAY, HEX SCREW SOCKET HEAD CAP M3x8 (10)
4.99 €
XB8 - 2014, XB9 - 2013, XB808E - 2010, XB9 - 2012, XB808 - 2011, XB8 - 2016, XB8 - 2017, XT9 - 2013, XB808 - 2009, XB8 - 2015, XT8 - 2017, XB808 - 2008, XB808 - 2010, XB9E - 2013, XRAY
M3x8 socket-head cap screw, hex drive. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, WASHER S 6x8x0.5 (10)
9.99 €
RX8 - 2017, XB808 - 2009, XT8 - 2007, NT1 - 2015, XB808 - 2010, XB9 - 2013, NT1 - 2017, XB8-TQ - 2006, XB9 - 2012, XB8-EC - 2007, XB808 - 2008, XB8R, NT1 - 2014, RX8 - 2016, XB808 - 2011, RX8 - 2014, XT9 - 2013, XB8 - 2005, NT1 - 2016, XT8 - 2009, XRAY
Flat washer. ID x OD x thickness = 6mm x 8mm x 0.5mm. Set of 10.
In stock
+ −
Add to wish list Add to comparison list
XRAY, SPRING-SET C=2.8 (2)
9.99 €
T1FK - 2004, T2R PRO - 2009, X1 - 2016, T2'008 - US - 2008, T1FK'05 - 2005, T2R - 2006, T2'009 - EU - 2009, T3 - 2012, T3 - 2011, T2'009 - US - 2009, T3 - EU - 2010, T2'007 - EU - 2007, T2 - 2006, T3 - US - 2010, T1R, T1 MINI, T3R - 2010, T2'007 - US - 2007, T1 EVO2 - 2003, T1 EVO2 - 2002, X1 - 2015, T2'008 - EU - 2008, XRAY
New ultimate-match shock springs (C = 2.8) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (2.8) on top spring coil for easy...
In stock
+ −
Add to wish list Add to comparison list
REAR FOAM TIRE MOUNTED WITH HEX HUB (40DEG) - MEDIUM
9.99 €
NT18, M18 PRO LiPo, M18 PRO, M18, XRAY, 1/18
Mounted rear foam tires (40deg - medium) on solid dish rims for use with drive shafts with hex adaptors ONLY. Will not fit on original M18 with original...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ANTI-ROLL BAR REAR 1.3 MM
1.90 €
T2'009 - EU - 2009, T3 - EU - 2010, T2'008 - US - 2008, T3 - 2012, T2'008 - EU - 2008, T3 - 2011, T2'007 - US - 2007, T2R PRO - 2009, T2'007 - EU - 2007, T2R - 2006, T3R - 2010, T2 - 2006, T2'009 - US - 2009, T3 - US - 2010, XRAY
T2, T3 rear anti-roll bar, 1.3mm dia, black colour. Optional bar for #303401 Rear Anti-Roll Bar Set. Marked with 3 laser-engraved lines for easy...
In stock
+ −
Add to wish list Add to comparison list
BRAKE CAM POST & ROD (2+2)
13.90 €
XB8R, XT8 - 2007, XT9 - 2013, XT8 - 2017, XB8 - 2005, XT8 - 2009, XB8-EC - 2007, XB8-TQ - 2006, XRAY
NC-machined brake cam set, includes wire actuating rods. Set of 2 cam posts and 2 wire rods.
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE STEERING BLOCK 1° KINGPIN LEFT
3.90 €
NT1 WE - 2010, NT1 - 2011, NT1R - 2010, NT1 - 2010, NT1 EC - 2009, NT1 - 2009, NT1 - 2014, NT1 - 2007, NT1 - 2013, NT1 PRO - 2012, NT1 - 2012, XRAY
  Molded-composite left steering block for XRAY NT1 with built-in 1° kingpin angle. Marked “L” for easy identification. Use with...
In stock
+ −
Add to wish list Add to comparison list
FRONT/REAR DIFF LARGE BEVEL GEAR 46T
54.99 €
XB8 - 2017, XB8-2018, XB8-2019, GTX - 2017, XB8 - 2014, XB8E - 2017, XB8 - 2015, XB8E - 2016, XB8 - 2016, XB8E - 2015, XRAY
46-tooth large external bevel gear manufactured from HUDY Steel suitable for front/rear differential. Precision machined on a special gear machine. Fits XB8.
In stock
+ −
Add to wish list Add to comparison list
XRAY, WASHER S 13x16x0.2 (10)
11.99 €
XB8-EC - 2007, XB8E - 2017, XB8 - 2014, XT8 - 2009, XB8E - 2015, XB8E - 2016, XB8 - 2015, XT8 - 2007, XB808 - 2011, XB808 - 2009, XB808 - 2008, XB9E - 2013, XB808E - 2010, XB8 - 2016, XB9 - 2013, XB808 - 2010, XB8 - 2017, XB9 - 2012, GTX - 2017, XT9 - 2013, XB8-TQ - 2006, XB8R, XB8 - 2005, XT8 - 2017, XRAY
Flat washer. ID x OD x thickness = 13mm x 16mm x 0.2mm. Set of 10.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ADJ. TURNBUCKLE M5 L/R 58 MM - HUDY SPRING STEEL (2)
3.10 €
XB808 - 2010, XB808 - 2011, XB808 - 2009, XB9 - 2013, XB808 - 2008, XB9 - 2012, XB9E - 2013, XB808E - 2010, XRAY
Adjustable left & right M5 turnbuckles manufactured from special HUDY Spring Steel™ material for turnbuckles, resulting in stronger turnbuckles with a...
In stock
+ −
Add to wish list Add to comparison list
XRAY, HEX SCREW SFH M2x4 - STAINLESS (10)
7.99 €
NT1 - 2007, NT1 PRO - 2012, NT1 - 2014, NT1 EC - 2009, NT1 - 2015, NT1 - 2009, NT1 - 2013, NT1 - 2017, NT1 - 2012, NT1 - 2016, NT1R - 2010, NT1 - 2011, NT1 - 2010, NT1 WE - 2010, XRAY
M2x4 flat-head machine screw, hex drive. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU DIFF LONG OUTPUT SHAFT - HARD COATED - 7075 T6
4.50 €
T2'007 - US - 2007, T1 - 2001, T2R - 2006, T1 EVO2 - 2002, T1 EVO2 - 2003, T1R, T1FK - 2004, T2 - 2006, T1FK'05 - 2005, T2'007 - EU - 2007, T1 MINI, XRAY
Long output shaft for #305000 Alu Ball Differential made from new special Swiss 7075 T6 aluminum which is 30% stronger than previous material. Heat-treated...
In stock
+ −
Add to wish list Add to comparison list
CLUTCH BELL 13T - LIGHTWEIGHT
35.70 €
XB8 - 2017, XB808 - 2011, XT8 - 2009, XB8 - 2016, XB808 - 2010, XT8 - 2007, XB8 - 2015, XB808 - 2009, XB9 - 2013, XB8 - 2014, XB808 - 2008, XB9 - 2012, XB8 - 2005, XB8-TQ - 2006, XB8R, XT9 - 2013, XB8-EC - 2007, XB808E - 2010, XT8 - 2017, XRAY
13-tooth clutch bell made from HUDY steel. Precision machined on a special gear machine, strategically lightened without sacrificing strength or durability.
In stock
+ −
Add to wish list Add to comparison list
XRAY 941015 HIGH-SPEED BALL-BEARING 10x15x4 RUBBER SEALED (2)
8.99 €
T4 - 2017, T2'009 - EU - 2009, XB2 Dirt - 2017, T3 - EU - 2010, XB4 - 2018, T1FK'05 - 2005, T4 - 2016, T2'008 - US - 2008, XB2 Dirt - 2016, T3 - 2012, XB4 - 2017, T1FK - 2004, T4 - 2015, T2'008 - EU - 2008, XB2 Carpet - 2018, T3 - 2011, XB4 - 2016, T1 MINI, T4 - 2014, T2'007 - US - 2007, XB2 Carpet - 2017, T2R PRO - 2009, T1 EVO2 - 2003, XB4 - 2015, T4 - 2013, T2'007 - EU - 2007, XB2 Carpet - 2016, T2R - 2006, T1 EVO2 - 2002, XB4 - 2014, T3R - 2010, XT2 - 2017, T2 - 2006, T4 - 2018, T2'009 - US - 2009, T1 - 2001, XB4 - 2013, T3 - US - 2010, XB4 2WD- 2014, T1R, XRAY
New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 10x15x4. Set of 2 pieces. Top-quality professional...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU TOP DECK MOUNT (2)
2.90 €
T1FK'05 - 2005, XRAY
CNC-machined alu top deck mounting posts for XRAY T1FK’05. Set of two. Recommended for use with #301165 Wide Top Deck in the rear.
In stock
+ −
Add to wish list Add to comparison list
XRAY, CARBIDE BALL-BEARING AXIAL 2.5x5.4x0.8
9.50 €
NT18MT, M18T, M18, M18 PRO, NT18T, M18MT, NT18, M18 PRO LiPo, M18T PRO, XRAY
High-precision axial thrustbearing for 385001 Alu. Adjustable Ball Differential for the XRAY M18. Carbide diff balls, and highest-quality materials and...
In stock
+ −
Add to wish list Add to comparison list
XRAY, MICRO MONSTER TRUCK TIRE & INSERT - CHEVRON (4+4)
19.99 €
NT18MT, NT18T, M18MT, M18T, M18T PRO, XRAY
Micro monster truck tires with Chevron block pattern. Set of 4 tires and 4 inserts.
In stock
+ −
Add to wish list Add to comparison list
XRAY, SPRING FRONT + REAR (4+4) - SET M18MT - SOFT
5.30 €
NT18MT, NT18T, M18T PRO, M18T, M18MT, XRAY
Spring set for M18MT includes 4 front springs (short) and 4 rear springs (long).
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE SUSPENSION ARM FRONT UPPER - V2
3.99 €
NT1 - 2014, NT1 - 2009, NT1 WE - 2010, NT1 - 2010, NT1R - 2010, NT1 - 2007, NT1 EC - 2009, NT1 - 2012, NT1 PRO - 2012, NT1 - 2013, NT1 - 2011, XRAY
Molded composite suspension arm, front upper. Used on either left or right side.
In stock
+ −
Add to wish list Add to comparison list
XRAY, AIR FILTER BODY & CAP - LOW PROFILE - V2
9.99 €
GTX - 2017, XB808 - 2011, XB8 - 2017, XB8 - 2005, XB8 - 2016, XB8-EC - 2007, XT8 - 2009, XB8 - 2015, XB8-TQ - 2006, XT8 - 2017, XB9 - 2013, XB808 - 2010, XT9 - 2013, XB9 - 2012, XT8 - 2007, XB808 - 2009, XB8 - 2014, XB8R, XB808 - 2008, XRAY
Molded composite low-profile air filter base and cap.
In stock
+ −
Add to wish list Add to comparison list
XRAY, DIFF OUTDRIVE ADAPTER - HUDY SPRING STEEL™ (2) --- Replaced with #335072
15.90 €
NT1 - 2010, NT1 - 2015, NT1 - 2009, NT1 - 2014, NT1 - 2007, NT1 - 2013, NT1 PRO - 2012, NT1 - 2012, NT1 WE - 2010, NT1 - 2011, NT1 - 2017, NT1R - 2010, NT1 EC - 2009, NT1 - 2016, XRAY
CNC-machined diff outdrive adaptor made from tough HUDY Spring Steel™. Shafts are precision ground and polished for smooth operation. Fits #335050 rear gear...
Out of stock
Out of stock Add to wish list Add to comparison list
XRAY, ECS DRIVE SHAFT CASE - HUDY SPRING STEEL™
8.90 €
T4 - 2014, T2'009 - US - 2009, T2 - 2006, T4 - 2015, T2R - 2006, T2'007 - EU - 2007, T4 - 2016, T2R PRO - 2009, T2'007 - US - 2007, T4 - 2013, T3 - EU - 2010, T2'008 - EU - 2008, T4 - 2017, T3R - 2010, T2'008 - US - 2008, T4 - 2018, T3 - US - 2010, T3 - 2012, T2'009 - EU - 2009, T3 - 2011, XRAY
ECS Drive Shaft Case made from HUDY Spring Steel™. Fits #305325 and #305327 ECS drive shafts.
In stock
+ −
Add to wish list Add to comparison list
BRAKE PAD "SLS" (4)
32.90 €
XB9 - 2013, XB8 - 2014, XT8 - 2017, XB8-2019, XB8 - 2015, XT9 - 2013, XB8-EC - 2007, XB8 - 2016, XB8-2018, XB8-TQ - 2006, XB808 - 2011, XB8 - 2017, XB808 - 2008, XB8R, GTX - 2017, XB808 - 2009, XT8 - 2007, XB9 - 2012, XB8 - 2005, XB808 - 2010, XT8 - 2009, XRAY
New ultra-efficient brake pads from special slip-free material. Set of 4.
In stock
+ −
Add to wish list Add to comparison list
XRAY, FRP SHOCK TOWER REAR 3MM
34.99 €
NT1R - 2010, NT1 - 2009, NT1 - 2007, NT1 - 2014, NT1 EC - 2009, NT1 - 2012, NT1 PRO - 2012, NT1 - 2011, NT1 WE - 2010, NT1 - 2010, XRAY
CNC-machined rear shock tower made from 3.0mm thick FRP material. Includes multiple shock upper mounting positions.
Out of stock
Out of stock Add to wish list Add to comparison list
XRAY, BALL-BEARING AXIAL 2.5x5.4x0.8
6.90 €
M18T, M18 PRO, M18 PRO LiPo, M18MT, NT18T, NT18MT, M18T PRO, XRAY
Axial ball-bearing set 2.5x5.4x0.8. Includes two outer plates and high-grade polished balls.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU LOWER 2-PIECE SUSPENSION HOLDER (1)
9.99 €
T4 - 2015, T4 - 2014, T4 - 2018, T4 - 2017, T4 - 2016, XRAY
Authentic XRAY alu rear lower suspension holder for the REAR of the front bulkhead of the T4’14. CNC-machined from premium Swiss 7075 T6 aluminum....
In stock
+ −
Add to wish list Add to comparison list
XRAY, CLUTCH BELL BALL-BEARING MR105ZZ 5x10x4 (2)
8.99 €
XB8-EC - 2007, RX8 - 2016, NT1 - 2016, XT8 - 2009, NT1 - 2010, XB8 - 2015, RX8 - 2017, NT1 - 2017, XT8 - 2007, NT1 - 2011, XB8 - 2014, XB8 - 2005, NT1 EC - 2009, XB8R, NT1 - 2012, XB9 - 2013, GTX - 2017, NT1 PRO - 2012, XB2 Dirt - 2017, NT1 - 2013, XB8-TQ - 2006, XT8 - 2017, NT1 WE - 2010, NT1R - 2010, NT1 - 2014, XB9 - 2012, NT1 - 2007, XT9 - 2013, XB8 - 2016, RX8 - 2014, NT1 - 2015, XB8 - 2017, NT1 - 2009, XRAY
High-performance clutch bell ball-bearings 5x10x4. Packed with grease specially made for clutch bell. Qty of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY, WASHER S 3.5x12x0.2 (10)
7.99 €
XB8 - 2017, XB808 - 2008, XT8 - 2009, XB8E - 2017, XB8 - 2005, XB808 - 2009, XT8 - 2017, XB8E - 2016, XB8 - 2014, XB808 - 2010, XT9 - 2013, XB9 - 2013, XB8 - 2015, XB808 - 2011, XB8R, XB8 - 2016, XB808E - 2010, XB9 - 2012, XB9E - 2013, XB8-EC - 2007, XB8E - 2015, XB8-TQ - 2006, XT8 - 2007, GTX - 2017, XRAY
Flat washer. ID x OD x thickness = 3.5mm x 12mm x 0.2mm. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
CLUTCH FLYWEIGHT SET - HIGH DYNAMIC
13.60 €
NT1R - 2010, NT1 - 2009, NT1 - 2015, NT1 - 2010, NT1 - 2013, NT1 - 2011, NT1 - 2014, NT1 - 2012, NT1 - 2017, NT1 - 2007, NT1 PRO - 2012, NT1 - 2016, NT1 WE - 2010, NT1 EC - 2009, XRAY
High-dynamic clutch flyweights with reinforced design are bigger and stronger for longer lifespan, increased resistance to breakage under extreme...
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE ADJ. SHIM FOR REAR WING PLATE (2)
6.90 €
XB9 - 2012, XB808 - 2009, XT8 - 2017, XB8 - 2015, XB9 - 2013, XB808 - 2010, XT9 - 2013, XB8 - 2016, XB9E - 2013, XB808 - 2011, XB8 - 2017, XT8 - 2007, XB808E - 2010, XB8-EC - 2007, XB8R, XB8E - 2015, XB8-TQ - 2006, XB8E - 2017, XB8 - 2005, XB8E - 2016, XB808 - 2008, XT8 - 2009, XB8 - 2014, XRAY
Tough molded composite shim set used for prolonging or shortening the rear wing for increased or decreased rear traction. Shims are positioned between the...
In stock
+ −
Add to wish list Add to comparison list
XRAY, SET OF LINKAGES + BALL JOINTS
5.90 €
M18 PRO LiPo, NT18, M18, M18 PRO, XRAY
Set of six linkages and ball joints includes center linkage, steering linkage between front steering blocks, rear toe-in linkages 4°, ball joints for front...
In stock
+ −
Add to wish list Add to comparison list
XRAY, WHEEL NUT - HARD COATED (2) --- Replaced with #355261
11.90 €
XB8R, XB8 - 2005, XB9 - 2012, XB8-EC - 2007, XT8 - 2007, XB8-TQ - 2006, XT8 - 2009, XB808 - 2008, XT8 - 2017, XB808 - 2009, XB808E - 2010, XT9 - 2013, XB808 - 2010, XB808 - 2011, XRAY
Hardcoated wheel nut. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
COMPOSITE ANTI-ROLL BAR BALL JOINT 4.9 MM (4)
9.99 €
T4 - 2015, XT2 - 2017, T4 - 2016, T4 - 2017, T4 - 2018, XRAY
COMPOSITE ANTI-ROLL BAR BALL JOINT 4.9 MM (4)
In stock
+ −
Add to wish list Add to comparison list
XRAY, INNER DRIVESHAFT ADAPTER - SPRING STEEL (2)
7.90 €
NT18, M18 PRO LiPo, M18 PRO, M18, XRAY
Precision-machined, specially-lightened outdrives for use with M18 front one-way differential #385101. Made from world-renowned HUDY Spring Steel™ for high...
In stock
+ −
Add to wish list Add to comparison list
XRAY 350018 XB8'23 - 1/8 LUXURY NITRO OFF-ROAD CAR
739.99 €
XRAY, 1/8 OFF-ROAD
In stock
+ −
Add to wish list Add to comparison list
XRAY X1 1/10 FORMULA BODY
38.99 €
X1 - 2016, X1 - 2017, X1 - 2018, X1 - 2015, XRAY, 1/10 F1
High-performance, low-profile aerodynamic body designed to perfectly fit the X1, and to work in most track conditions while keeping the full-time F1 style...
In stock
+ −
Add to wish list Add to comparison list
XRAY, SCREW PHILLIPS SS 3.5x45 (10)
4.90 €
XB8 - 2014, XB8E - 2017, XB808 - 2010, XT8 - 2009, XB8 - 2005, XB8-EC - 2007, GTX - 2017, XT8 - 2007, XB808 - 2008, XB8E - 2016, XB8 - 2017, XB9E - 2013, XB808E - 2010, XB8E - 2015, XB9 - 2013, XB808 - 2011, XB8 - 2016, XB9 - 2012, XB8-TQ - 2006, XT9 - 2013, XB8 - 2015, XB8R, XB808 - 2009, XT8 - 2017, XRAY
M3.5x45 flat-head screw, self-tapping, Phillips drive. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, DIFF WASHER 17 x 23 x 1 (2)
2.50 €
T1R, T2'009 - EU - 2009, T3 - EU - 2010, T1FK'05 - 2005, T2'008 - US - 2008, T3 - 2012, T1FK - 2004, T2'008 - EU - 2008, T3 - 2011, T1 MINI, T2'007 - US - 2007, T2R PRO - 2009, T1 EVO2 - 2003, T2'007 - EU - 2007, T2R - 2006, T1 EVO2 - 2002, T3R - 2010, T2 - 2006, T2'009 - US - 2009, T1 - 2001, T3 - US - 2010, XRAY
Two diff washers for ball-differentials. Each side of the washer has a distinct finish; a polished side against which the diff balls ride, and a rougher...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU QUICK ROLL-CENTER HOLDER™ 4.9MM - ORANGE (2+2)
8.90 €
T3 - 2011, T2'009 - US - 2009, T2'009 - EU - 2009, T3R - 2010, T3 - US - 2010, T3 - EU - 2010, XRAY
In stock
+ −
Add to wish list Add to comparison list
XRAY, CLUTCH PRELOAD ADJ. NUT - HUDY SPRING STEEL™ - V2
7.90 €
NT1 - 2010, NT1 - 2015, RX8 - 2011, RX8 - 2014, NT1 - 2016, NT1R - 2010, NT1 - 2009, NT1 - 2014, NT1 WE - 2010, NT1 - 2007, NT1 - 2013, NT1 PRO - 2012, RX8 - 2016, NT1 - 2012, NT1 EC - 2009, RX8 - 2017, RX8 - 2013, NT1 - 2011, NT1 - 2017, RX8 - 2012, XRAY
Fine-threaded clutch spring preload adjustment nut for XCA clutch, made from tough HUDY Spring Steel™.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ANTI-ROLL BAR REAR 1.5 MM
7.99 €
T2'009 - EU - 2009, T3 - EU - 2010, T2'008 - US - 2008, T3 - 2012, T2'008 - EU - 2008, T3 - 2011, T2'007 - US - 2007, T2R PRO - 2009, T2'007 - EU - 2007, T2R - 2006, T3R - 2010, T2 - 2006, T2'009 - US - 2009, T3 - US - 2010, XRAY
T2, T3 rear anti-roll bar, 1.5mm dia, black colour. Optional bar for #303401 Rear Anti-Roll Bar Set. Marked with 5 laser-engraved lines for easy...
In stock
+ −
Add to wish list Add to comparison list
XRAY, NARROW ALU PINION GEAR - HARD COATED 19T / 48
13.99 €
T2'009 - EU - 2009, T3 - EU - 2010, T1FK'05 - 2005, T4 - 2016, T2'008 - US - 2008, T3 - 2012, T1FK - 2004, T4 - 2015, T2'008 - EU - 2008, T3 - 2011, T1 MINI, T4 - 2014, T2'007 - US - 2007, T2R PRO - 2009, T1 EVO2 - 2003, T4 - 2013, T2'007 - EU - 2007, T2R - 2006, T1 EVO2 - 2002, T3R - 2010, T2 - 2006, T4 - 2018, T2'009 - US - 2009, T1 - 2001, T3 - US - 2010, T1R, T4 - 2017, XRAY
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the...
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE SUSPENSION ARM FRONT UPPER - HARD
2.90 €
NT1 - 2007, NT1 - 2012, NT1 WE - 2010, NT1 - 2011, NT1R - 2010, NT1 - 2010, NT1 PRO - 2012, NT1 - 2009, NT1 - 2014, NT1 EC - 2009, NT1 - 2013, XRAY
Front upper suspension arm made from new hard composite material, used on either left or right side. The hard composite material makes the car more stable,...
In stock
+ −
Add to wish list Add to comparison list
XRAY, SET OF SUSPENSION ARMS 6° CASTER - HARD (2)
8.99 €
M18 PRO LiPo, NT18, M18 PRO, M18, XRAY
Set of 2 molded harder-composite front upper suspension arms for XRAY M18 and NT18. These new arms have the same camber (-1°) as the stock upper arms, but...
In stock
+ −
Add to wish list Add to comparison list
XRAY, WASHER S 7x10x0.2 (10)
9.99 €
XB8 - 2015, NT1 - 2016, XB808 - 2010, RX8 - 2011, XT8 - 2009, NT1 - 2009, XB8 - 2014, NT1 - 2015, XB808 - 2009, NT1R - 2010, XT8 - 2007, NT1 - 2007, RX8 - 2017, NT1 - 2014, XB808 - 2008, NT1 WE - 2010, XB9E - 2013, GTX - 2017, RX8 - 2016, NT1 - 2013, XB8-EC - 2007, NT1 PRO - 2012, XB9 - 2013, RX8 - 2014, NT1 - 2012, XB8 - 2017, NT1 EC - 2009, XB9 - 2012, RX8 - 2013, XT9 - 2013, NT1 - 2011, XB8 - 2016, NT1 - 2017, XB808 - 2011, RX8 - 2012, XT8 - 2017, NT1 - 2010, XRAY
Flat washer. ID x OD x thickness = 7mm x 10mm x 0.2mm. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY 305971 NARROW ALU PINION GEAR - HARD COATED 21T / 64
13.99 €
X10 LINK GT - 2010, T4 - 2015, T2'009 - EU - 2009, X1 - 2017, T1R, T3 - US - 2010, T2R PRO - 2009, T4 - 2017, T2'009 - US - 2009, T4 - 2018, T2 - 2006, T2R - 2006, X10 GT - 2018, T3R - 2010, X12 - 2016, X1 - 2015, T2'007 - EU - 2007, T1 - 2001, X1 - 2018, X12 - 2017, T4 - 2013, X12 - 2015, X1 - 2016, T1 EVO2 - 2002, T2'007 - US - 2007, X10 GT - 2009, X12 EU - 2018, T3 - 2011, X12 - 2012, T4 - 2016, T1 EVO2 - 2003, T2'008 - EU - 2008, X10 GT - 2015, X12 US - 2018, T1FK - 2004, T3 - 2012, X12 - 2014, T4 - 2014, T1 MINI, T2'008 - US - 2008, X10 GT - 2016, T1FK'05 - 2005, T3 - EU - 2010, XRAY
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the...
In stock
+ −
Add to wish list Add to comparison list
COMPOSITE SQUARE ADJ. ROLL-CENTER BUSHINGS - V2 (2)
11.90 €
XB8E - 2015, XB8-2019, GTX - 2017, XB8E - 2016, XB808 - 2008, XB8 - 2014, XB8E - 2017, XB9E - 2013, XB8 - 2015, XB9 - 2012, XB9 - 2013, XB8 - 2016, XT8 - 2017, XB808 - 2011, XB8 - 2017, XT9 - 2013, XB808 - 2009, XB808E - 2010, XB8-2018, XB808 - 2010, XRAY
Eccentric bushings for adjusting suspension settings, made from tough composite. Fits XB808 alu suspension holders - square adj. roll-centers. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE LOWER & UPPER BULKHEAD FRONT LEFT FOR WIRE ANTI-ROLL BAR
9.99 €
NT1 - 2013, NT1 - 2010, NT1R - 2010, NT1 - 2007, NT1 - 2012, NT1 PRO - 2012, NT1 WE - 2010, NT1 - 2011, NT1 EC - 2009, NT1 - 2009, XRAY
Molded composite lower & upper front LEFT bulkhead set. The front bulkheads were redesigned to accommodate the new front wire anti-roll bar...
In stock
+ −
Add to wish list Add to comparison list
XRAY HIGH-SPEED BALL-BEARING 6x10x3 RUBBER SEALED (2)
7.99 €
M18, XB808 - 2011, XB8 - 2005, XB808 - 2008, NT18T, XB9 - 2013, GTX - 2017, XB808E - 2010, NT18, T1FK - 2004, T1 EVO2 - 2002, XB9E - 2013, M18 PRO, XB8E - 2015, M18 PRO LiPo, XB8 - 2014, T1 - 2001, XT8 - 2007, XB808 - 2009, XB8E - 2016, M18T, XB8 - 2015, XT8 - 2009, XB8 - 2016, XB8-TQ - 2006, XB8E - 2017, M18MT, T1R, XT8 - 2017, XB8 - 2017, XB808 - 2010, T1FK'05 - 2005, XB8R, M18T PRO, T1 EVO2 - 2003, XT9 - 2013, T1 MINI, XB8-EC - 2007, NT18MT, XB9 - 2012, XRAY
New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 6x10x3. Set of 2 pieces. Top-quality professional...
In stock
+ −
Add to wish list Add to comparison list
XRAY, SPRING FRONT + REAR - SET M18T - SOFT-MEDIUM
5.30 €
M18MT, NT18T, NT18MT, M18T, M18T PRO, XRAY
Spring set for M18T includes 2 front springs (short) and 2 rear springs (long).
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB9 FRONT SHOCK TOWER PROTECTOR
2.40 €
XB9E - 2013, XB9 - 2012, XB9 - 2013, XRAY
Front graphite shock tower protector made from hardened steel
In stock
+ −
Add to wish list Add to comparison list
XRAY, SPRING FRONT + REAR - SET NT18T - MEDIUM
5.30 €
M18MT, NT18T, NT18MT, M18T, M18T PRO, XRAY
Spring set for NT18T includes 2 front springs (short) and 2 rear springs (long).
In stock
+ −
Add to wish list Add to comparison list
XRAY, CH-Clip 8 (10)
1.90 €
T1 - 2001, T1 MINI, XRAY
CH-clip 8. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY HEX SCREW SFH M4x12 (10)
6.99 €
X1 - 2017, XB808E - 2010, RX8 - 2013, XB9 - 2013, XT8 - 2007, X1 - 2018, XB8E - 2015, RX8 - 2014, XB8-TQ - 2006, XT8 - 2009, XB8 - 2005, XB8E - 2016, RX8 - 2016, XB808 - 2008, XT8 - 2017, XB8 - 2014, XB8E - 2017, RX8 - 2017, XB808 - 2009, GTX - 2017, XB8 - 2015, XB8R, X1 - 2015, XB808 - 2010, RX8 - 2011, XB8 - 2016, XT9 - 2013, XB9 - 2012, X1 - 2016, XB808 - 2011, RX8 - 2012, XB8 - 2017, XB9E - 2013, XB8-EC - 2007, XRAY
M4x12 flat-head machine screw, hex drive. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
REAR FOAM TIRE MOUNTED (2) - SOFT
9.99 €
M18, NT18, XRAY, HPI RS4 MICRO, 1/18
Pre-mounted soft-compound rear foam tires on tough composite white 6-spoke rims. Set of 2. Fits NT18 and M18.
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE BELT PULLEY 20T - 2-SPEED-CENTER
10.99 €
NT1 - 2010, NT1 - 2016, NT1 - 2009, NT1 - 2015, NT1 - 2007, NT1 - 2014, NT1 PRO - 2012, NT1 - 2013, NT1 WE - 2010, NT1 - 2012, NT1 EC - 2009, NT1R - 2010, NT1 - 2011, NT1 - 2017, XRAY
Molded composite 20T belt pulley on main layshaft, drives rear belt.
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE WIDE BUMPER
20.99 €
NT1 - 2016, NT1 - 2012, NT1 - 2017, NT1 - 2011, NT1 EC - 2009, NT1 - 2010, NT1 PRO - 2012, NT1 - 2009, NT1 WE - 2010, NT1 - 2007, NT1 - 2014, NT1R - 2010, NT1 - 2015, NT1 - 2013, XRAY
Impact-absorbing wide lower front bumper for the NT1 is made from high-quality composite material to better absorb energy from crashes. • Wide composite...
In stock
+ −
Add to wish list Add to comparison list
EXHAUST WIRE MOUNT SET - LONG
8.90 €
XB8-EC - 2007, XB8 - 2005, XB8-TQ - 2006, XB8-2018, XB808 - 2008, XB808 - 2009, XB8R, XT8 - 2009, XB808 - 2010, XT8 - 2007, XB8-2019, XRAY
Exhaust wire mounting set for XT8 includes mounting wire and post, composite support, and all necessary hardware.
In stock
+ −
Add to wish list Add to comparison list
XRAY, HIGH-SPEED BALL-BEARING 5x8x2.5 RUBBER SEALED (2)
9.99 €
XB4 - 2017, NT1 - 2015, NT1 WE - 2010, NT1 - 2009, RX8 - 2011, X1 - 2015, XB4 - 2016, NT1 - 2007, NT1 PRO - 2012, NT1 - 2010, RX8 - 2016, T4 - 2014, XB4 - 2015, X1 - 2016, NT1 EC - 2009, NT1 - 2011, RX8 - 2014, T3 - 2011, XB4 - 2014, T4 - 2015, NT1 - 2017, NT1 - 2012, T3 - 2012, RX8 - 2013, X1 - 2018, T4 - 2016, NT1 - 2016, NT1 - 2013, T4 - 2013, RX8 - 2012, X1 - 2017, XB4 2WD- 2014, T4 - 2017, XB4 - 2013, NT1 - 2014, NT1R - 2010, RX8 - 2017, XB4 - 2018, T4 - 2018, XRAY
New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 5x8x2.5mm. Set of 2 pieces.   Top-quality...
In stock
+ −
Add to wish list Add to comparison list
XRAY HIGH-SPEED BALL-BEARING 5x9x3 RUBBER SEALED (2)
5.99 €
T1 EVO2 - 2003, T1 EVO2 - 2002, T1 MINI, T1 - 2001, T1R, T4-2019, T1FK - 2004, T1FK'05 - 2005, XRAY
New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 5x9x3. Set of 2 pieces. Top-quality professional...
In stock
+ −
Add to wish list Add to comparison list
XRAY, SET OF REAR UPPER SUSPENSION ARMS M18T (2)
3.90 €
M18MT, NT18T, M18T PRO, M18T, NT18MT, XRAY
Molded rear upper suspension arms for M18T made from tough composite material.
In stock
+ −
Add to wish list Add to comparison list
XRAY, GRAPHITE SHOCK TOWER FRONT 2.5MM
12.99 €
NT1 WE - 2010, NT1 - 2012, NT1R - 2010, NT1 - 2011, NT1 - 2010, NT1 PRO - 2012, NT1 - 2009, NT1 EC - 2009, NT1 - 2007, NT1 - 2014, XRAY
CNC-machined front shock tower made from top-grade 2.5mm thick graphite. Includes multiple shock upper mounting positions.
In stock
+ −
Add to wish list Add to comparison list
XRAY, HEX SCREW SB M4x8 (10)
4.90 €
XB808 - 2009, T2'008 - US - 2008, XB8 - 2014, XB8E - 2017, T3 - 2011, T2'007 - EU - 2007, XT8 - 2009, RX8 - 2011, XB808 - 2008, T2'009 - US - 2009, T4 - 2018, XB8E - 2016, T4 - 2017, T2'007 - US - 2007, XT8 - 2007, RX8 - 2012, XB8-TQ - 2006, T3 - EU - 2010, RX8 - 2017, XB8E - 2015, T4 - 2015, T2'008 - EU - 2008, XB9E - 2013, RX8 - 2014, XB8-EC - 2007, T1 EVO2 - 2003, T3 - 2012, T1FK - 2004, XB808E - 2010, T4 - 2014, T2R - 2006, RX8 - 2013, XB9 - 2013, XB8 - 2017, T1 MINI, T3 - US - 2010, T1FK'05 - 2005, XB808 - 2011, T4 - 2016, T2'009 - EU - 2009, T1R, XB9 - 2012, XB8 - 2016, GTX - 2017, XT9 - 2013, T4 - 2013, T1 EVO2 - 2002, XB808 - 2010, T2R PRO - 2009, XB8 - 2005, RX8 - 2016, XB8R, XB8 - 2015, T2 - 2006, XT8 - 2017, T3R - 2010, T1 - 2001, XRAY
M4x8 setscrew, hex drive. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, HARDENED STEEL BRAKE PAD - LASER CUT (2)
5.99 €
NT1 - 2010, NT1 - 2016, NT1 - 2009, NT1 - 2015, NT1 - 2007, NT1 - 2014, NT1 PRO - 2012, NT1 - 2013, NT1 WE - 2010, NT1 - 2012, NT1 EC - 2009, NT1R - 2010, NT1 - 2011, NT1 - 2017, XRAY
High-precision, ultra-efficient steel brake pads for NT1 are laser cut and precision ground on both sides for an ultra-smooth surface finish to guarantee...
In stock
+ −
Add to wish list Add to comparison list
CVD Adjustable Drive Axle - HUDY Spring Steel™ (2)
39.90 €
XB8, XRAY
Drive axle for XRAY adjustable drive shafts. Drive shaft length adjustment uses 4 different connecting hole positions at the drive axle end to allow changes...
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE SUSPENSION ARM FRONT LOWER FOR WIRE ANTI-ROLL BAR
7.30 €
NT1 - 2011, NT1 - 2016, NT1 - 2010, NT1 - 2015, NT1 - 2009, NT1 - 2014, NT1 - 2007, NT1 - 2013, NT1 WE - 2010, NT1 - 2012, NT1 PRO - 2012, NT1R - 2010, NT1 EC - 2009, NT1 - 2017, XRAY
Front lower suspension arm made from tough molded composite material. Updated and modified to mount the new front wire anti-roll bar. Used on either left or...
In stock
+ −
Add to wish list Add to comparison list
REAR SPRING-SET - 1 DOT (2)
8.90 €
XB4 - 2015, XB2 Carpet - 2018, XB4 2WD- 2014, XB2 Dirt - 2016, XB4 - 2018, XB2 Dirt - 2017, XB4 - 2017, XB4 - 2013, XB4 - 2016, XB4 - 2014, XB2 Carpet - 2016, XT2 - 2017, XB2 Carpet - 2017, XRAY
The springs have been specifically designed to complement the big bore shocks. Set of 2. The spring rate of the linear springs is constant during the entire...
In stock
+ −
Add to wish list Add to comparison list
XRAY, Sweater Hooded with Zipper - Blue (L)
79.99 €
With the world's most stylish RC car designs in its portfolio, XRAY now brings you a brand new collection of XRAY Team Wear to make you stand out...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ECS DRIVE SHAFT PIN 2 x 8.5 WITH FLAT SPOT (2)
4.99 €
T4 - 2014, T2'009 - US - 2009, T2 - 2006, T4 - 2015, T2R - 2006, T2'007 - EU - 2007, T4 - 2016, T2R PRO - 2009, T2'007 - US - 2007, T4 - 2013, T3R - 2010, T2'008 - EU - 2008, T4 - 2017, T3 - EU - 2010, T2'008 - US - 2008, T4 - 2018, T3 - US - 2010, T3 - 2012, T2'009 - EU - 2009, T3 - 2011, XRAY
Polished chrome pin for ECS drive shaft, 2.0 x 8.5mm. Specially hand-ground for maximum precision. To help prevent of loosening of the setscrew from the ECS...
In stock
+ −
Add to wish list Add to comparison list
XRAY 930150 CARBIDE AXIAL THRUSTBEARING F5-10 5x10x4
26.99 €
NT1 - 2009, NT1R - 2010, NT1 EC - 2009, NT1 - 2010, NT1 - 2011, RX8 - 2011, RX8 - 2013, NT1 - 2012, NT1 - 2015, RX8 - 2014, NT1 - 2013, NT1 - 2016, RX8 - 2016, NT1 - 2014, NT1 PRO - 2012, RX8 - 2017, RX8 - 2012, NT1 - 2007, NT1 - 2017, NT1 WE - 2010, XRAY
High-precision axial thrustbearing assembly for XCA clutch (5x10mm) includes carbide balls for smooth operation and long life.
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE REAR BODY POST HOLDER
1.90 €
NT18, M18, XRAY
Composite rear body post holder holds rear bodyposts. Designed to allow bodyposts to be set to variable heights.
In stock
+ −
Add to wish list Add to comparison list
XRAY, FUEL TANK MOUNTING GROMMET (4)
4.99 €
XB9 - 2013, XB808 - 2011, XB8 - 2017, XB9 - 2012, XB8R, XB8-EC - 2007, XT8 - 2009, XB8 - 2005, XB8-TQ - 2006, XT8 - 2017, XB8 - 2014, XB808 - 2008, XT9 - 2013, XT8 - 2007, XB808 - 2009, XB8 - 2015, GTX - 2017, XB808 - 2010, XB8 - 2016, XRAY
Soft rubber mounting grommets for fuel tank absorb vibrations. Set of 4.
In stock
+ −
Add to wish list Add to comparison list
XRAY, SPRING-SET C=4.5 - MEDIUM-MEDIUM-HARD - REAR (2)
9.99 €
NT1 - 2015, T2R PRO - 2009, NT1 - 2007, T2 - 2006, T1FK'05 - 2005, NT1 WE - 2010, T3 - 2011, NT1 - 2012, T2'008 - EU - 2008, T1 MINI, NT1 PRO - 2012, T3 - 2012, NT1 - 2009, T2'008 - US - 2008, T1FK - 2004, NT1 - 2017, T3 - EU - 2010, NT1 - 2011, T2'009 - EU - 2009, T1 EVO2 - 2003, NT1 - 2014, T3 - US - 2010, NT1 - 2016, T2'009 - US - 2009, NT1R - 2010, T2'007 - US - 2007, T1R, T3R - 2010, NT1 EC - 2009, T2R - 2006, NT1 - 2010, T2'007 - EU - 2007, T1 EVO2 - 2002, XRAY
XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and...
In stock
+ −
Add to wish list Add to comparison list
Alu Drive Flange with One-Way Bearing - Swiss 7075 T6
41.99 €
RX8, GTX8, GTX - 2017, XRAY
1st gear drive flange CNC-machined from tough Swiss 7075 T6 alu. Includes factory-pressed (non-replaceable) high-quality German one-way bearing, hand-ground...
In stock
+ −
Add to wish list Add to comparison list
XRAY, HIGH-PERFORMANCE LOW FRICTION KEVLAR DRIVE BELT FRONT 3 x 513 MM
19.99 €
T3 - 2011, T4 - 2015, T2'009 - EU - 2009, T4 - 2014, T4 - 2016, T4 - 2013, T4 - 2017, T3R - 2010, T4 - 2018, T3 - 2012, T3 - EU - 2010, T2R PRO - 2009, T3 - US - 2010, XRAY
Optional specially-modified high-performance Kevlar®-reinforced 513mm-long, 3mm-wide front drive belt. This belt is very thin and elastic as possible for...
In stock
+ −
Add to wish list Add to comparison list
XRAY, HIGH PERFORMANCE SOFTSHELL JACKET (XL)
179.99 €
HIGH PERFORMANCE SOFTSHELL JACKET (XL)
In stock
+ −
Add to wish list Add to comparison list
CLOSED BALL JOINT 3.9 (4)
4.90 €
XB8-2019, XB8 - 2015, XB8R, XB8-EC - 2007, XB8 - 2016, XB808 - 2009, XB8-TQ - 2006, XB8 - 2017, XB808 - 2010, XB808 - 2008, XB9 - 2013, XB808 - 2011, XB9 - 2012, XT8 - 2007, XB8 - 2005, XT9 - 2013, XT8 - 2017, XB8-2018, XB8 - 2014, XT8 - 2009, XRAY
Molded composite ball joint for 3.9mm ball. Set of 4.
In stock
+ −
Add to wish list Add to comparison list
XRAY, REAR MICRO SHOCK SHAFT M18T (2)
3.90 €
M18T PRO, NT18MT, NT18T, M18T, M18MT, XRAY
Hardened steel rear shock shafts (long) for M18T, highly polished for smooth shock action. Set of two.
In stock
+ −
Add to wish list Add to comparison list
XRAY, Inner Driveshaft Adapter (2)
5.50 €
M18T, N18T, XRAY
Hardcoated duraluminum dual-slotted outdrives for use with M18 front one-way differential #385101. The outdrives are specially lightened for increased...
In stock
+ −
Add to wish list Add to comparison list
XRAY, WASHER S 7x10x0.3 (10)
9.99 €
XB8 - 2015, NT1 - 2014, XB808 - 2010, NT1 - 2007, XT8 - 2009, NT1 - 2016, XB8 - 2014, NT1 WE - 2010, XB808 - 2009, NT1 - 2012, XT8 - 2007, GTX - 2017, RX8 - 2017, RX8 - 2014, XB808 - 2008, NT1 - 2015, XB9E - 2013, NT1 - 2011, RX8 - 2016, RX8 - 2013, XB8-EC - 2007, NT1 EC - 2009, XB9 - 2013, NT1 - 2013, RX8 - 2012, XB8 - 2017, RX8 - 2011, XB9 - 2012, NT1 - 2010, XT9 - 2013, NT1R - 2010, XB8 - 2016, NT1 - 2017, XB808 - 2011, NT1 - 2009, XT8 - 2017, NT1 PRO - 2012, XRAY
Flat washer. ID x OD x thickness = 7mm x 10mm x 0.3mm. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ANTI-ROLL BAR REAR 1.1 MM
2.10 €
T2R PRO - 2009, T2'008 - US - 2008, T3 - 2011, T2'008 - EU - 2008, T3 - 2012, T2'007 - US - 2007, T3 - EU - 2010, T2'007 - EU - 2007, T3 - US - 2010, T2 - 2006, T2'009 - US - 2009, T3R - 2010, T2R - 2006, T2'009 - EU - 2009, XRAY
T2, T3 rear anti-roll bar, 1.1mm dia, black colour. Optional bar for #303401 Rear Anti-Roll Bar Set. Marked with 1 laser-engraved line for easy...
In stock
+ −
Add to wish list Add to comparison list
XRAY, GRAPHITE RADIO PLATE - MULTI-FLEX
16.90 €
NT1 - 2013, XRAY
CNC-machined radio plate for NT1 made from top-quality graphite material. The radio plate now becomes a part of Multi-Flex™ set-up and allows for...
In stock
+ −
Add to wish list Add to comparison list
XRAY, CLUTCH BELL 16T WITH BEARINGS
17.99 €
NT18MT, NT18T, XRAY
16-tooth clutch bell for NT18 made from HUDY steel. Precision machined on a special gear machine. Includes two 4x7x2.5 bearings.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ADJ. TURNBUCKLE M5 L/R 64 MM - HUDY SPRING STEEL - V3 (2)
2.90 €
XB808 - 2011, XB808 - 2010, XB808 - 2009, XB9 - 2013, XB808 - 2008, XB9 - 2012, XB9E - 2013, XB808E - 2010, XRAY
Adjustable left & right M5 turnbuckles manufactured from special HUDY Spring Steel™ material for turnbuckles, resulting in stronger turnbuckles with a...
In stock
+ −
Add to wish list Add to comparison list
XRAY Ball-Bearing 13x19x4 Rubber Sealed - Grease (2)
9.99 €
XB8-2019, XB8, XB8 - 2017, XB8-2018, XRAY
High-speed ball-bearings for XB8’18 and XB8E’18 manufactured specially for XRAY. ID x OD x thickness (mm) = 13x19x4. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB9 COMPOSITE FRONT LOWER SUSPENSION ARM
3.50 €
XB9 - 2013, XB9E - 2013, XB9 - 2012, XRAY
Front lower suspension arm for XB9 made from super-tough high-tech composite material. Universal design allows the same front arm to be used on...
In stock
+ −
Add to wish list Add to comparison list
XRAY, NUT M4 (10)
4.99 €
X1 - 2017, XT2 - 2017, XB2 Dirt - 2016, RX8 - 2014, RX8 - 2016, X1 - 2016, XT8 - 2017, XB2 Carpet - 2018, XB808 - 2011, XB808 - 2009, RX8 - 2011, XB2 Carpet - 2017, XB808E - 2010, XB8 - 2016, RX8 - 2013, XB2 Carpet - 2016, XB8E - 2015, XB808 - 2010, T2 - 2006, RX8 - 2012, XB8E - 2016, XB8 - 2017, X1 - 2015, GTX - 2017, X1 - 2018, XB8E - 2017, XB2 Dirt - 2017, XB808 - 2008, RX8 - 2017, XRAY
M4 nylock nut. Set of 10.
In stock
+ −
Add to wish list Add to comparison list
XRAY, SET OF REAR LINKAGES 2.5° TOE-IN (2)
5.90 €
NT18, M18, M18 PRO, M18 PRO LiPo, XRAY
Two rear linkages with pre-set 2.5° toe-in decreases rear toe-in, giving more top speed, and making the car more aggressive and efficient. Set includes...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU REAR CVD DRIVE AXLE - SWISS 7075 T6 - HARD COATED
9.99 €
RX8 - 2012, RX8 - 2016, RX8 - 2011, RX8 - 2017, RX8 - 2014, RX8 - 2013, XRAY
CNC-machined CVD drive axle for RX8 made from premium lightweight Swiss 7075 T6 hardcoated aluminum. Strategically-machined, super-lightweight drive axles...
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE C-HUB LEFT - 0° DEG. - HARD (ECS)
9.99 €
T4 - 2013, T2'007 - EU - 2007, T3 - 2012, T4 - 2014, T2'007 - US - 2007, T2R - 2006, T4 - 2015, T2'008 - EU - 2008, T2'009 - EU - 2009, T4 - 2016, T3 - EU - 2010, T2'009 - US - 2009, T4 - 2017, T3 - US - 2010, T2'008 - US - 2008, T4 - 2018, T2R PRO - 2009, T3R - 2010, T2 - 2006, T3 - 2011, XRAY
Molded composite C-hub for left steering block. Caster pre-set at 0°. HARD rigidity for rubber-tire racing and also foam tire racing. Use with...
In stock
+ −
Add to wish list Add to comparison list
XRAY, SET OF SUSPENSION ARMS 6° CASTER (2)
3.99 €
M18 PRO LiPo, NT18, M18 PRO, M18, XRAY
Set of 2 molded composite front upper suspension arms for XRAY M18. These new arms have the same camber (-1°) as the stock upper arms, but less caster (6°...
In stock
+ −
Add to wish list Add to comparison list
XRAY, DRIVE SHAFT REPLACEMENT PLASTIC CAP 3.5 MM (4)
7.99 €
T4 - 2017, T2'009 - US - 2009, T3R - 2010, T4 - 2018, T2'009 - EU - 2009, T3 - US - 2010, T2'008 - US - 2008, T3 - EU - 2010, T2'008 - EU - 2008, T3 - 2012, T4 - 2015, T3 - 2011, T4 - 2014, T4 - 2016, T2R PRO - 2009, T4 - 2013, XRAY
Low friction 3.5mm drive pin clips for protection and cushioning of drive shaft pin in diff outdrives. Set of 4. For use only with XRAY T2'008 alu...
In stock
+ −
Add to wish list Add to comparison list
 Prev
1 2 3 4 5 6 7 8 9
Next  3 - 10