210 8089888

Product filters Product filters

MANUFACTURER
PRICE

€  –  €

  • ‎1€
  • ‎119.99€
FITS TO
Reset

XRAY

All about spare parts, optionals and tune-ups for XRAY cars

Sort Alphabetically: A to Z
24 Per Page
XRAY, ALU LABYRINTH DUST COVER FOR CLUTCH BELL
1.80 €
XB808 - 2009, XB808 - 2008, XB808 - 2010, XB808 - 2011, XRAY
Machined aluminum Labyrinth Cover fits all XRAY clutch bells to prevent dirt from entering the clutch assembly. Especially effective when used with V2...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU MIDDLE SHAFT LOCATING COLLAR - LIGHTWEIGHT
4.90 €
RX8 - 2013, RX8 - 2011, RX8 - 2012, XRAY
Stylish-lightened alu locating collar made from tough 7076 T6 alu replaces the composite collar used on the front middle shaft.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU ONE-PIECE ENGINE MOUNT - SWISS 7075 T6 - HARD COATED
14.90 €
XB808 - 2010, XB808 - 2009, XT9 - 2013, XB808 - 2008, XT8 - 2009, XB9 - 2013, XB8 - 2014, XB9 - 2012, XB8 - 2015, XB808 - 2011, XRAY
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU REAR CVD DRIVE AXLE - SWISS 7075 T6 - HARD COATED
9.99 €
RX8 - 2011, RX8 - 2017, RX8 - 2014, RX8 - 2013, RX8 - 2012, RX8 - 2016, XRAY
CNC-machined CVD drive axle for RX8 made from premium lightweight Swiss 7075 T6 hardcoated aluminum. Strategically-machined, super-lightweight drive axles...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU REAR LOWER SUSP. ARM HOLDER - SWISS 7075 T6
14.99 €
RX8 - 2012, RX8 - 2011, RX8 - 2013, RX8 - 2014, XRAY
Alu lower suspension holder. Ultra-strong construction for increased lifespan and durability. CNC-machined from highest-grade Swiss 7075 T6 aluminum.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU REAR LOWER SUSP. HOLDER - FRONT - SQUARE ADJ. ROLL-CENTER
14.99 €
XB8 - 2017, XB808E - 2010, XB9E - 2013, XB808 - 2011, XB9 - 2012, XB808 - 2010, XB9 - 2013, XB808 - 2009, XB8E - 2017, XB808 - 2008, XT9 - 2013, XRAY
Authentic XRAY alu rear lower suspension holder for the FRONT of the rear bulkhead. CNC-machined from 7mm premium Swiss 7075 T6 aluminum, hardcoated for...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU REAR SHOCK BODY - HARD COATED (2)
6.40 €
XB9 - 2012, XT9 - 2013, XT8 - 2007, XB9E - 2013, XB9 - 2013, XT8 - 2009, XRAY
CNC-machined alu rear shock body for XB9, made from premium lightweight 7075 T6 aluminum. The big bore shock bodies are externally threaded with an...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU SHIM 3.2x4.8x0.5 (4)
5.20 €
X12 EU - 2018, X12 - 2015, X10 GT - 2015, X12 - 2016, X10 GT - 2016, X12 - 2017, X1 - 2015, X10 GT - 2018, X1 - 2016, X10 GT - 2009, X10 LINK GT - 2010, X1 - 2018, X12 US - 2018, X12 - 2012, X1 - 2017, X12 - 2014, XRAY
Front ride-height adjustment shims for XRAY XII for placement on steering kingpins. ID x OD x thickness = 3.2 x 4.8 x 0.5mm. Set of 4.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU SHIM 3x6x0.5MM - ORANGE (10)
9.99 €
XB4 - 2016, T3 - US - 2010, NT1 - 2016, T2 - 2006, X12 - 2015, T4 - 2017, RX8 - 2011, NT1 - 2009, XB2 Carpet - 2017, T2'009 - US - 2009, X10 GT - 2009, T1 - 2001, NT1 - 2015, XB4 - 2015, T3 - EU - 2010, T1R, X12 - 2014, T4 - 2016, NT1R - 2010, NT1 - 2007, XB2 Carpet - 2016, T2'009 - EU - 2009, X1 - 2018, RX8 - 2017, NT1 - 2014, XB4 - 2014, T3 - 2012, T1FK'05 - 2005, X12 - 2012, XT2 - 2017, T4 - 2015, NT1 WE - 2010, X12 US - 2018, T2'008 - US - 2008, X1 - 2017, RX8 - 2016, NT1 - 2013, XB4 - 2013, T3 - 2011, X10 LINK GT - 2010, T1FK - 2004, XB4 2WD- 2014, T4 - 2014, NT1 PRO - 2012, X12 EU - 2018, T2'008 - EU - 2008, X1 - 2016, RX8 - 2014, NT1 - 2012, XB2 Dirt - 2017, X10 GT - 2018, T1 MINI, XB4 - 2018, T4 - 2013, NT1 EC - 2009, X12 - 2017, T2'007 - US - 2007, X1 - 2015, RX8 - 2013, NT1 - 2011, XB2 Dirt - 2016, T2R PRO - 2009, X10 GT - 2016, T1 EVO2 - 2003, XB4 - 2017, T3R - 2010, NT1 - 2017, T2'007 - EU - 2007, X12 - 2016, T4 - 2018, RX8 - 2012, NT1 - 2010, XB2 Carpet - 2018, T2R - 2006, X10 GT - 2015, T1 EVO2 - 2002, XRAY
Alu shims 3x6mm size, 0.5mm thick. Orange color. Set of 10.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU SHOCK BODY (2)
14.90 €
NT1 - 2016, RX8 - 2017, NT1 - 2014, RX8 - 2016, NT1 - 2017, RX8 - 2014, NT1 - 2015, XRAY
CNC-machined externally-threaded shock bodies made from premium Swiss 7075 T6 aluminum and hardened for maximum life. Redesigned for improved traction and...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU SHOCK BODY ADJ. NUT (2)
6.60 €
XB8E - 2015, XT8 - 2009, XB8 - 2016, XB808E - 2010, XT8 - 2017, XB8 - 2015, XB808 - 2011, XT9 - 2013, XB9 - 2013, XB8 - 2014, XB808 - 2010, XB9 - 2012, GTX - 2017, XB808 - 2009, XB8E - 2017, XB9E - 2013, XB808 - 2008, XB8E - 2016, XT8 - 2007, XB8 - 2017, XRAY
CNC-machined shock spring adjustment collar for shock absorbers, made from premium lightweight 7075 T6 aluminum. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU SHOCK BODY NUT FOR SHOCK BOOT (2)
2.60 €
XT9 - 2013, XT8 - 2007, XB808 - 2008, XT8 - 2009, XB808 - 2009, XB808E - 2010, XB808 - 2010, XB808 - 2011, XRAY
Black hardcoated aluminum shock body nut. The entire lower shock assembly is secured with the new lower aluminum shock cap which makes assembly/disassembly...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU STEERING PLATE 7075 T6 (3MM)
3.90 €
XB8 - 2005, XT8 - 2009, XT8 - 2007, XT9 - 2013, XB8R, XB8-TQ - 2006, XB8-EC - 2007, XRAY
Steering plate made of 3mm CNC-machined, highest-grade 7075 T6 aircraft aluminum. Xray stylish black finish with silver edging. Multiple steering linkage...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ANTI-ROLL BAR REAR 2.6 MM - SET
5.90 €
RX8 - 2013, RX8 - 2012, RX8 - 2011, XRAY
Tough steel rear anti-roll bar wire (2.6mm). Manually measured, selected, and straightened to eliminate all tweak. Laser engraved 2.6 for easy identification.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ANTI-ROLL BAR REAR 3.0 MM - SET
5.99 €
RX8 - 2013, RX8 - 2012, RX8 - 2011, XRAY
Tough steel rear anti-roll bar wire (3.0). Manually measured, selected, and straightened to eliminate all tweak. Laser engraved 3.0 for easy identification.
In stock
+ −
Add to wish list Add to comparison list
XRAY, BALL DIFF WASHER 9x14x0.5 (2)
2.90 €
M18, NT18T, M18 PRO, NT18MT, M18T PRO, NT18, M18T, M18MT, M18 PRO LiPo, XRAY
Set of two diff rings for 385001 Alu. Adjustable Ball Differential for the XRAY M18.
In stock
+ −
Add to wish list Add to comparison list
XRAY, BALL STEEL 2.4MM (24)
4.99 €
M18T, T1FK - 2004, M18, T1 - 2001, T1 EVO2 - 2002, M18 PRO, NT18T, M18 PRO LiPo, NT18MT, T1FK'05 - 2005, M18MT, NT18, T1R, T1 EVO2 - 2003, M18T PRO, T1 MINI, XRAY
Steel balls 2.4mm for ball differential. Set of 24 pieces is enough for two ball differentials (12 each).
In stock
+ −
Add to wish list Add to comparison list
XRAY, BALL STUD 5.8MM (4)
4.99 €
XT8 - 2009, XB8R, XT8 - 2007, XB8-TQ - 2006, XB8-EC - 2007, XB8 - 2005, XRAY
Ball stud 5.8mm. Manufactured from famous Hudy Spring Steel™. Set of 4.
In stock
+ −
Add to wish list Add to comparison list
XRAY, BALL STUD 5.8MM WITH BACKSTOP - V2 (2)
6.00 €
XT8 - 2009, XT9 - 2013, XB8R, XB8-TQ - 2006, XB8-EC - 2007, XT8 - 2007, XB8 - 2005, XRAY
Ball stud 5.8mm with backstop. Recommended for installation on steering blocks to prevent the steering linkages from disconnecting after a heavy...
In stock
+ −
Add to wish list Add to comparison list
XRAY, BALL-BEARING 1/4" x 3/8" x 1/8" FLANGED (2)
11.99 €
X1 - 2017, X12 - 2014, X1 - 2018, X12 EU - 2018, X12 - 2015, X10 GT - 2009, X12 - 2017, X12 - 2016, X10 GT - 2015, X10 GT - 2018, X10 LINK GT - 2010, X10 GT - 2016, X1 - 2015, X12 US - 2018, X1 - 2016, X12 - 2012, XRAY
High-speed flanged ball-bearings manufactured specially for XRAY. ID x OD x thickness (") = ?" x ⅜" x ⅛". Set of 2 pieces....
In stock
+ −
Add to wish list Add to comparison list
XRAY, BALL-BEARING 1/8" x 5/16" x 9/64" FLANGED (2)
7.99 €
X10 GT - 2015, X12 US - 2018, X10 GT - 2016, X10 LINK GT - 2010, X12 - 2014, X10 GT - 2018, X12 - 2015, X12 - 2016, X12 - 2012, X12 - 2017, X10 GT - 2009, X12 EU - 2018, XRAY
High-speed flanged ball-bearings manufactured specially for XRAY. ID x OD x thickness (") = ⅛" x 5/16" x 9/64". Set of 2 pieces....
In stock
+ −
Add to wish list Add to comparison list
XRAY, BALL-BEARING 3x6x2.5 (2)
4.99 €
XB2 Carpet - 2017, T4 - 2015, XB2 Carpet - 2016, T4 - 2013, T4 - 2018, XT2 - 2017, T3 - 2012, T4 - 2017, XB2 Dirt - 2017, T4 - 2014, T3R - 2010, XB2 Dirt - 2016, T3 - US - 2010, T3 - 2011, XB2 Carpet - 2018, T3 - EU - 2010, T4 - 2016, XRAY
High-quality ball-bearings, 13x6x2.5mm. Set of 2.  These ball-bearings are degreased and lightly oiled with AeroShell™ Fluid 12 oil for maximum...
In stock
+ −
Add to wish list Add to comparison list
XRAY, BALL-BEARING 4x7x2.5 (2)
3.90 €
T1R, M18T, T2'007 - US - 2007, T3 - EU - 2010, T1 EVO2 - 2003, T1FK'05 - 2005, M18T PRO, T2'008 - EU - 2008, T2R - 2006, T1 MINI, T4 - 2016, NT18, X1 - 2018, T1FK - 2004, T2'009 - EU - 2009, T2'009 - US - 2009, T4 - 2015, NT18MT, X1 - 2017, M18 PRO, T2'008 - US - 2008, T3R - 2010, NT18T, T4 - 2018, M18 PRO LiPo, T2 - 2006, T3 - US - 2010, T1 - 2001, T4 - 2017, M18MT, T2'007 - EU - 2007, T2R PRO - 2009, T1 EVO2 - 2002, XRAY
High-quality ball-bearings ID x OD x thickness (mm) = 4x7x2.5mm. Set of 2 pieces. These ball-bearings are degreased and lightly oiled with AeroShell...
In stock
+ −
Add to wish list Add to comparison list
XRAY, BALL-BEARING 5x8x2.5 FLANGED (2)
7.99 €
T1 EVO2 - 2003, T1 EVO2 - 2002, T1R, T1 - 2001, NT1 - 2017, T1FK - 2004, T1 MINI, XRAY
High-quality flanged ball-bearings ID x OD x thickness (mm) = 5x8x2.5mm. Set of 2 pieces.
In stock
+ −
Add to wish list Add to comparison list
9 - 23  Prev
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Next  25 - 36