210 8089888

Product filters Product filters

MANUFACTURER (1)
PRICE

€  –  €

  • ‎1.99€
  • ‎199.99€
Reset

NITRO POWER

All about RC nitro car products

Sort Alphabetically: A to Z
48 Per Page
CYLINDER SET FOR FUELIE 26S ENGINE
69.99 €
Fuelie 26S Engine, HPI
Fuelie 26S Engine/Cylinder/Gasket Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.
In stock
+ −
Add to wish list Add to comparison list
HD FUEL TUBE 300MM
4.99 €
HPI
Heavy duty fuel tubing that's perfect for racing, bashing and more! This fuel tubing is designed specifically for nitromethane-based fuel, so it's perfect...
In stock
+ −
Add to wish list Add to comparison list
HPI 87100 - FLYWHEEL ASSY. 34mm
19.99 €
HPI
In stock
+ −
Add to wish list Add to comparison list
HPI 101125 - Air Cleaner Outer Foam
6.99 €
TROPHY 3.5, HPI
In stock
+ −
Add to wish list Add to comparison list
HPI 101247 Exhaust Gaskets
8.99 €
HPI
EXHAUST GASKETS
In stock
+ −
Add to wish list Add to comparison list
HPI 101275 - MID RANGE NEEDLE VALVE WITH O-RINGS G 3.0 ENGINE
12.99 €
G3.0, ENGINE, HPI
In stock
+ −
Add to wish list Add to comparison list
HPI 101760 Stone Fuel Filter (L)/Gunmetal
7.99 €
HPI
In stock
+ −
Add to wish list Add to comparison list
HPI 101761 Stone Fuel Filter (S)/Black
9.99 €
TROPHY BUGGY 3.5, TROPHY TRUGGY 4.6, HPI
Use this Stone Fuel Filter to eliminate the chance of debris from the track getting into your engine! When refueling or performaning maintenance on your...
In stock
+ −
Add to wish list Add to comparison list
HPI 101786 1:8th scale Waterproof Air Filter Foam elements (Trophy Nitro Series)
9.99 €
BUGGY, HPI
In stock
+ −
Add to wish list Add to comparison list
HPI 101831 Water Resistant Air Filter Set
19.99 €
BULLET MT, BULLET ST, HPI
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.
In stock
+ −
Add to wish list Add to comparison list
HPI 108590 CLUTCH FLYWEIGHT
22.90 €
R10, HPI
In stock
+ −
Add to wish list Add to comparison list
HPI 108598 - CLUTCH SHOE (YELLOW)
14.99 €
HPI R40, HPI, 1/10
In stock
+ −
Add to wish list Add to comparison list
HPI 108671 - EXHAUST HANGER WIRE
9.99 €
HPI
In stock
+ −
Add to wish list Add to comparison list
HPI 117259 - NITRO STAR F5.9 ENGINE WITH PULLSTART
199.99 €
HPI
The F5.9 engine is a huge powerplant with eye-opening acceleration and ground-tearing amounts of torque, capable of powering your Savage up to ludicrous...
In stock
+ −
Add to wish list Add to comparison list
Save 63%
HPI 1301 NITRO STAR PRO 12R XS ENGINE (NORMAL SHAFT/NO PULLSTART)
189.00 € 70.00 €
.12 ENGINE , HPI
Rear Exhaust/5.5mm Slide Carb./Normal Shaft/3 Port/Std head/1.35hp 38000RPM. Perfect for nitro touring car racing Slide valve carburetor constructed...
In stock
+ −
Add to wish list Add to comparison list
Save 38%
HPI 1310 - PISTON with CHROMED CYLINDER.12 ENGINE
64.99 € 39.99 €
.12 ENGINE , HPI
14mm inside  17mm outside  20mm up  PERFECT FOR AMATEUR TUNERS !!!!
In stock
+ −
Add to wish list Add to comparison list
Save 28%
HPI 1311 PISTON/CYLINDER/CONNECTING ROD SET .12 ENGINE
82.99 € 59.99 €
.12 ENGINE , HPI
NITRO STAR PRO 12R XS/CYLINDER/PISTON/PISTON PIN/CONNECTING ROD/RETAINER 14mm inside  17mm outside  20mm up  CONNCTING ROD ...
In stock
+ −
Add to wish list Add to comparison list
HPI 1314 - UNDERHEAD (STANDARD PLUG) .12 ENGINE
14.99 €
.12 ENGINE , HPI
.12 ENGINES  29x14mm  normal glow plug (not turbo)   PERFECT FOR AMATEUR TUNERS !!!!  
In stock
+ −
Add to wish list Add to comparison list
HPI 1315 GASKET SET FOR CYLINDER .12 ENGINE (3pcs) 20x14x 0.1... x0.2... x0.3
2.99 €
HPI 12R XS ENGINE , .12 ENGINE , HPI
HPI .12 ENGINE ....NITRO STAR PRO 12R XS      0.1mm (Brass)x1 ........  0.2mm(Brass)x1........  0.3mm(Alumunum)x1  
In stock
+ −
Add to wish list Add to comparison list
Save 29%
HPI 1316 - CONNECTING ROD .12 ENGINE
34.99 € 24.99 €
.12 ENGINE , HPI
23X5mm ......4MM UP and DOWN INSIDE ..... PERFECT FOR AMATEUR TUNERS !!!!
In stock
+ −
Add to wish list Add to comparison list
HPI 1317 - PISTON PIN/RETAINER SET .12 ENGINE 4X7mm
3.99 €
ENGINE, HPI 12R XS ENGINE , .12 ENGINE , HPI
PIN 4x7mm for .12engines with retainer set
In stock
+ −
Add to wish list Add to comparison list
HPI 1318 - RETAINER FOR PISTON PIN (4pcs)
1.99 €
HPI 12R XS ENGINE , .12 ENGINE , HPI
NITRO STAR PRO 12R XS.  .12ENGINES 
In stock
+ −
Add to wish list Add to comparison list
HPI 1321 - BALL BEARING 7x19x6mm (FRONT) .12 ENGINES
14.99 €
.12 ENGINE , HPI
In stock
+ −
Add to wish list Add to comparison list
HPI 1322 - BALL BEARING 12x21x5mm (REAR) .12 ENGINE
19.99 €
.12 ENGINE , HPI
In stock
+ −
Add to wish list Add to comparison list
HPI 1323 - LOCK PIN FOR CARBURETOR .12ENGINE 4x20mm 6mm nut
6.99 €
.12 ENGINE , HPI
4X20mm
In stock
+ −
Add to wish list Add to comparison list
Save 50%
HPI 1326 - CRANK SHAFT (STANDARD SHAFT/ NO PULLSTART)
29.99 € 14.99 €
HPI 12R XS ENGINE , HPI
12 X21X5 mm REAR BALL BEARING  7X 19 X 16 MM FRONT BALL BEARING  PERFECT FOR AMATEUR TUNERS !!!!
In stock
+ −
Add to wish list Add to comparison list
HPI 1328 - O-RING FOR COVER PLATE .12 engine (2pcs) 16x14x1
1.99 €
.12 ENGINE , HPI
In stock
+ −
Add to wish list Add to comparison list
HPI 1329 - COVER PLATE WITH O-RING .12 ENGINE 21mm x 11mm inside x 13mm outside
6.99 €
.12 ENGINE , HPI
PERFECT FOR TUNERS !!!!
In stock
+ −
Add to wish list Add to comparison list
Save 50%
HPI 1332 - CYLINDER HEAD ,12 ENGINE
39.99 € 19.99 €
.12 ENGINE , HPI
VERY LOW COST PERFECT REPLACEMENT NEW FOR YOUR .12 ENGINES
In stock
+ −
Add to wish list Add to comparison list
HPI 1334 - O-RING COMPLETE SET .12 ENGINE CARBURATOR
4.99 €
.12 ENGINE , HPI
In stock
+ −
Add to wish list Add to comparison list
Save 44%
HPI 1360 - SLIDE CARBURETOR COMPLETE .12 ENGINE
44.99 € 24.99 €
.12 ENGINE , HPI
PERFECT LOW PRICE FOR TUNING !!!
In stock
+ −
Add to wish list Add to comparison list
Save 60%
HPI 1365 - SLIDE CARBURETOR MAIN BODY .12 ENGINES
24.99 € 9.99 €
.12 ENGINE , HPI
PERFECT LOW PRICE FOR TUNING !!!
In stock
+ −
Add to wish list Add to comparison list
Save 60%
HPI 1366 - LOW SPEED NEEDLE VALVE with O-RING .12 ENGINES
14.99 € 5.99 €
.12 ENGINE , HPI
PERFECT LOW PRICE TO TEST TUNING !!!
In stock
+ −
Add to wish list Add to comparison list
HPI 1368 - UNIBALL .12 ENGINES
4.99 €
.12 ENGINE , HPI
In stock
+ −
Add to wish list Add to comparison list
HPI 1369 - DUST PROTECTION BOOT .12 ENGINES
2.99 €
.12 ENGINE , HPI
In stock
+ −
Add to wish list Add to comparison list
HPI 1370 - SLIDE VALVE 23x7mm .12 ENGINES
8.99 €
.12 ENGINE , HPI
PERFECT FOR TUNING YOUR .12 ENGINE !!!!
In stock
+ −
Add to wish list Add to comparison list
HPI 1372 - MID RANGE NEEDLE VALVE with O-RING .12 ENGINES
6.99 €
.12 ENGINE , HPI
In stock
+ −
Add to wish list Add to comparison list
HPI 1374 - MAIN NEEDLE VALVE HOLDER .12 ENGINES
6.99 €
.12 ENGINE , HPI
In stock
+ −
Add to wish list Add to comparison list
HPI 1375 - IDLE ADJUSTMENT SCREW with O-RING .12 ENGINES
5.99 €
.12 ENGINE , HPI
In stock
+ −
Add to wish list Add to comparison list
HPI 1376 - FUEL LINE FITTING .12 ENGINE
3.99 €
.12 ENGINE , HPI
In stock
+ −
Add to wish list Add to comparison list
HPI 1377 - O-RING FOR CARBURETOR BODY (2pcs) .12 ENGINES
1.99 €
.12 ENGINE , HPI
In stock
+ −
Add to wish list Add to comparison list
HPI 1417 UNDERHEAD F3.5
21.99 €
Savage 3.5, TROPHY 3.5, HPI
Out of stock
Out of stock Add to wish list Add to comparison list
HPI 1418 - GASKET FOR CYLINDER (0.2mm). HPI G3.0 ENGINE .18
3.99 €
G3.0, HPI
In stock
+ −
Add to wish list Add to comparison list
HPI 1430 - ONE WAY BEARING FOR PULLSTART 12MM
19.99 €
NITRO F SERIES, NITRO STAR G3.0, S-25, HPI
ONE WAY BEARING FOR PULLSTART
In stock
+ −
Add to wish list Add to comparison list
HPI 15105 Nitro Star G3.0 Engine With Pullstart
149.99 €
1/10, HPI
Pulverize the competition with this amazingly fast, durable and easy to adjust engine! Using the latest technology and construction techniques, this is the...
In stock
+ −
Add to wish list Add to comparison list
HPI 15107 NITRO STAR T3.0 ENGINE WITH PULLSTART
175.99 €
HPI
6.5mm Rotary Carb./ABC/Standard Shaft/Side Exhaust/Heatsink Head/Black Crank Case Powering the RTR NITRO RS4 3 EVO+ , the T3.0 is HPI's a fantastic...
In stock
+ −
Add to wish list Add to comparison list
HPI 15126 - PULLSTART ASSY. (w/o ONE-WAY BEARING) 14MM BB
29.99 €
RS4 3 Evo, MT 2, NITRO STAR T3.0, HPI
NITRO STAR T-15/T3.0
In stock
+ −
Add to wish list Add to comparison list
HPI 15129 - STARTING SHAFT 25X6
9.99 €
NITRO STAR T-15, HPI
In stock
+ −
Add to wish list Add to comparison list
 Prev
1 2
Next