210 8089888

XRAY

https://www.teamxray.com/

Sort by Popularity
96 Per Page
XRAY, DRIVE SHAFT COUPLING - SPRING STEEL (2)
3.30 €
T1 EVO2 - 2003, T1 EVO2 - 2002, T1FK - 2004, T1 - 2001, T1FK'05 - 2005, T1R, T1 MINI, XRAY
Hudy Spring Steel drive shaft coupling, works in front and rear drive shafts. Specially hand-ground for maximum precision. Set of two.
In stock
+ −
Add to wish list Add to comparison list
XRAY O-RING 12.1 x 1.6 (10)
7.00 €
XB808 - 2011, NT1 - 2009, T1 EVO2 - 2003, T3 - 2012, T1FK - 2004, XB9 - 2012, NT1 - 2016, XB8 - 2005, T2'008 - EU - 2008, XT9 - 2013, RX8 - 2011, XB8-TQ - 2006, NT1 - 2007, T1 EVO2 - 2002, T3 - 2011, XB8R, NT1 - 2015, T1 MINI, X1 - 2016, T2'007 - US - 2007, XT8 - 2017, NT1R - 2010, XB8-EC - 2007, GTX - 2017, T1 - 2001, T2R PRO - 2009, XB8E - 2017, NT1 - 2014, X1 - 2015, T2'007 - EU - 2007, XT8 - 2009, NT1 WE - 2010, XB8 - 2017, T2R - 2006, RX8 - 2017, XB8E - 2016, NT1 - 2012, T3R - 2010, T2 - 2006, XT8 - 2007, NT1 PRO - 2012, XB8 - 2016, T2'009 - US - 2009, RX8 - 2016, XB8E - 2015, NT1 - 2011, T3 - US - 2010, T1R, XB9E - 2013, NT1 EC - 2009, XB8 - 2015, T2'009 - EU - 2009, RX8 - 2014, XB808E - 2010, NT1 - 2010, T3 - EU - 2010, T1FK'05 - 2005, XB9 - 2013, NT1 - 2017, XB8 - 2014, T2'008 - US - 2008, RX8 - 2012, XRAY
Rubber O-ring fits over 12mm shaft. 1.6mm thick. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, GEARBOX CASE M18T
5.90 €
M18MT, M18T PRO, NT18MT, NT18T, M18T, XRAY
Molded gearbox case set for M18T made from tough composite material. Includes upper and lower cases.
In stock
+ −
Add to wish list Add to comparison list
XRAY, NARROW ALU PINION GEAR - HARD COATED 18T / 64
9.99 €
T4 - 2017, T2'009 - US - 2009, T3R - 2010, T2'008 - US - 2008, X10 GT - 2015, X12 - 2016, T2R - 2006, X10 GT - 2018, T4 - 2018, T1FK'05 - 2005, T3 - US - 2010, X1 - 2018, T2'009 - EU - 2009, T1 EVO2 - 2003, T1R, X10 LINK GT - 2010, X1 - 2015, T1 MINI, T3 - EU - 2010, X10 GT - 2009, T1 EVO2 - 2002, T2 - 2006, X12 - 2012, T4 - 2015, T4 - 2013, X1 - 2017, T1 - 2001, T2'007 - EU - 2007, X12 - 2014, X12 US - 2018, T2R PRO - 2009, X1 - 2016, T1FK - 2004, T2'007 - US - 2007, X12 - 2015, X12 EU - 2018, T4 - 2014, T4 - 2016, T3 - 2011, T2'008 - EU - 2008, X10 GT - 2016, X12 - 2017, T3 - 2012, XRAY
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the...
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 COMPOSITE CASTER BLOCK 14° RIGHT - HAND MODIFIED
3.99 €
XB808 - 2008, XB9 - 2012, XB9E - 2013, XB808E - 2010, XB808 - 2011, XB808 - 2009, XB808 - 2010, XB9 - 2013, XRAY
Right-side 14° caster block for XB808 made from tough molded composite. Hand-modified with the artisan skills of experienced XRAY craftsmen. The preset...
In stock
+ −
Add to wish list Add to comparison list
XRAY, FRONT TQ LOWER SUSPENSION ARM
3.50 €
XB8-EC - 2007, XB8 - 2005, XB8R, XB8-TQ - 2006, XRAY
The redesigned front lower suspension arms with all new special profile provide higher stiffness and rigidity to prevent bending of the arm under extreme...
In stock
+ −
Add to wish list Add to comparison list
XRAY, RELIEF STEERING BALL JOINT 5.8MM FOR M4 (2)
1.50 €
XT8 - 2007, XT8 - 2009, XT9 - 2013, XRAY
Molded composite relief steering ball joint for mounting on M4 turnbuckle, attaches to 5.8mm pivot ball. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY, BALL STUD 5.8MM WITH BACKSTOP - V2 (2)
6.00 €
XB8-TQ - 2006, XB8-EC - 2007, XT8 - 2007, XB8 - 2005, XT8 - 2009, XT9 - 2013, XB8R, XRAY
Ball stud 5.8mm with backstop. Recommended for installation on steering blocks to prevent the steering linkages from disconnecting after a heavy...
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE FRONT BRACE
2.90 €
XB9 - 2013, XB9 - 2012, XB8E - 2015, XB8 - 2015, XB8 - 2014, XB9E - 2013, XRAY
Front brace made from tough molded composite. Using the composite brace makes the car more flexible and forgiving, making it easier to drive....
In stock
+ −
Add to wish list Add to comparison list
XRAY, HEX SCREW SFH M2x6 - STAINLESS (10)
8.99 €
NT1 - 2015, NT1 - 2010, NT1R - 2010, NT1 - 2011, NT1 - 2009, NT1 WE - 2010, NT1 - 2013, NT1 PRO - 2012, NT1 - 2014, NT1 EC - 2009, NT1 - 2007, NT1 - 2017, NT1 - 2012, NT1 - 2016, XRAY
M2x6 flat-head machine screw, hex drive. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, HEX SCREW SFH M3x6 (10)
7.99 €
XB4 - 2017, T3 - EU - 2010, T4 - 2017, X10 LINK GT - 2010, NT1 WE - 2010, T2 - 2006, XB8-EC - 2007, X1 - 2018, X12 EU - 2018, NT1 - 2014, T2'008 - EU - 2008, XT2 - 2017, RX8 - 2012, XB2 Dirt - 2017, T2R - 2006, T3R - 2010, X10 GT - 2016, NT1 - 2007, XB8 - 2016, T4 - 2018, T4 - 2016, X12 - 2017, NT1 - 2015, T2'008 - US - 2008, XB8R, RX8 - 2013, XB2 Dirt - 2016, NT1 - 2009, T4 - 2015, X10 GT - 2018, T3 - US - 2010, XB8 - 2015, NT1 EC - 2009, X12 - 2016, NT1 PRO - 2012, T2'007 - US - 2007, XB8E - 2016, X1 - 2016, XB2 Carpet - 2018, NT1 - 2010, X10 GT - 2015, T4 - 2014, XB8 - 2014, T2R PRO - 2009, X12 - 2015, NT1 - 2017, RX8 - 2014, XB8E - 2015, X1 - 2015, XB2 Carpet - 2017, NT1 - 2011, T2'009 - EU - 2009, T4 - 2013, XB8 - 2005, T3 - 2011, X12 - 2014, NT1 - 2016, RX8 - 2016, XB808E - 2010, X1 - 2017, XB2 Carpet - 2016, NT1 - 2012, T2'009 - US - 2009, NT1R - 2010, XB4 - 2018, T3 - 2012, X12 - 2012, GTX - 2017, RX8 - 2017, XB8-TQ - 2006, X10 GT - 2009, X12 US - 2018, NT1 - 2013, T2'007 - EU - 2007, RX8 - 2011, XRAY
M3x6 flat-head machine screw, hex drive. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 ALU BEARING COLLAR FOR 3 DIFF BEARINGS (2)
2.30 €
XB808 - 2010, XB808 - 2008, XB808E - 2010, XB808 - 2009, XRAY
Alu collar provides even spacing between bearings within front/rear XB808 diff bulkhead blocks. With capturing screws tightened, both bearings are...
In stock
+ −
Add to wish list Add to comparison list
XRAY WASHER S 2.2 (10)
7.40 €
XB8 - 2005, M18MT, XB8-EC - 2007, XT8 - 2009, XB8 - 2014, M18T, XB8-TQ - 2006, XB9 - 2013, XB8 - 2015, M18T PRO, XB808 - 2008, XB808 - 2011, XB808 - 2010, NT18, XB808 - 2009, XB8R, XT8 - 2017, NT18MT, XB8 - 2016, XB9 - 2012, XT9 - 2013, NT18T, XT8 - 2007, GTX - 2017, XB8 - 2017, XRAY
Flat washer, 2.2mm ID. Set of 10 pieces
In stock
+ −
Add to wish list Add to comparison list
XRAY 340153 - RX8E 2023 - 1/8 Electro Onroad Car Kit
899.99 €
XRAY, 1/8 ON-ROAD
The NEW RX8E 2023! Ultra-compact and super lightweight receiver box moves the weight lower and closer to the center of the chassis Shorter servo saver...
In stock
+ −
Add to wish list Add to comparison list
XRAY, HIGH-PERFORMANCE KEVLAR DRIVE BELT FRONT 5.0 x 186 MM - V2
19.99 €
NT1 WE - 2010, NT1 - 2015, NT1 - 2011, NT1R - 2010, NT1 - 2013, NT1 - 2014, NT1 - 2012, NT1 - 2009, NT1 - 2007, NT1 EC - 2009, NT1 - 2010, NT1 - 2017, NT1 PRO - 2012, NT1 - 2016, XRAY
High-performance Kevlar®-reinforced front drive belt 5.0 x 186mm.
In stock
+ −
Add to wish list Add to comparison list
XRAY, DIFF PIN (2)
2.40 €
XB8E - 2015, XB8-EC - 2007, XT8 - 2009, XB808E - 2010, XB8E - 2016, XB8-TQ - 2006, XT9 - 2013, GTX - 2017, XB8R, XB808 - 2008, XB8 - 2005, XB9 - 2012, XB808 - 2009, XB8 - 2014, XB9 - 2013, XB808 - 2010, XB8 - 2015, XB9E - 2013, XB808 - 2011, XB8 - 2016, XT8 - 2007, XRAY
Precision-ground polished steel pins for differential internal satellite gears. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY BALL-BEARING 5x12x4 RUBBER SEALED - GREASE (2)
8.99 €
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU SHOCK BODY ADJ. NUT (2)
6.60 €
XB8 - 2015, XB808 - 2011, XT9 - 2013, XB9 - 2013, XB8 - 2014, XB808 - 2010, XB9 - 2012, GTX - 2017, XB808 - 2009, XB8E - 2017, XB9E - 2013, XB808 - 2008, XB8E - 2016, XT8 - 2007, XB8 - 2017, XB8E - 2015, XT8 - 2009, XB8 - 2016, XB808E - 2010, XT8 - 2017, XRAY
CNC-machined shock spring adjustment collar for shock absorbers, made from premium lightweight 7075 T6 aluminum. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY, GLUED BRAKE PAD SET - ULTRA-EFFICIENT (4)
59.99 €
XB8 - 2016, XB808 - 2010, XT8 - 2009, XB8 - 2015, XB808 - 2009, XT8 - 2007, XB8 - 2005, XB808 - 2008, XB9 - 2013, XB8 - 2014, XB8-TQ - 2006, XB9 - 2012, GTX - 2017, XB8-EC - 2007, XB8R, XT8 - 2017, XB8 - 2017, XB808 - 2011, XT9 - 2013, XRAY
Factory pre-assembled brake pad set for consistent and precise braking. High-precision, ultra-efficient steel brake pads are CNC-machined and precision...
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE C-HUB 6° DEG. LEFT
6.99 €
XB4 - 2015, XB4 - 2013, XB4 - 2017, XB4 - 2014, XB4 - 2018, XB4 2WD- 2014, XB4 - 2016, XRAY
Molded composite C-hub for steering block. Caster pre-set at 6°. The roll center position can be easily and quickly adjusted by inserting different...
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE SOLID AXLE ADAPTER
4.99 €
NT1 WE - 2010, NT1 - 2011, NT1 - 2017, NT1R - 2010, NT1 EC - 2009, NT1 - 2016, NT1 - 2010, NT1 - 2015, NT1 - 2009, NT1 - 2014, NT1 - 2007, NT1 - 2013, NT1 PRO - 2012, NT1 - 2012, XRAY
Molded composite adapter to convert #335000 front gear differential into a solid front axle. Used to replace internal bevel and satellite gears.
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 COMPOSITE SET OF SHIMS FOR SHOCKS 1 & 2.5 MM
1.50 €
XB808 - 2008, XT8 - 2007, XB808 - 2011, XB808E - 2010, XB808 - 2009, XB808 - 2010, XT8 - 2009, XRAY
Set of composite molded shims for XB808 shocks. Includes 1.0 & 2.5mm sizes.
In stock
+ −
Add to wish list Add to comparison list
XRAY, 362290 STEEL STEERING BUSHING - SHORT (2)
9.99 €
XT2 - 2017, XB2 Carpet - 2016, XB4 - 2013, XB2 Carpet - 2017, XB2 Carpet - 2018, XB4 - 2014, XB4 - 2017, XB4 - 2015, XB4 - 2018, XB4 - 2016, XB4 2WD- 2014, XB2 Dirt - 2017, XB2 Dirt - 2016, XRAY
Precision-machined short bushing for front C-hub steering block pivot screws. These bushings are used also in composite servo saver arms and in composite...
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE STEERING & SERVO BALL JOINT 5.8 MM (4+2)
12.99 €
NT1 - 2012, NT1 EC - 2009, RX8 - 2017, RX8 - 2013, NT1 - 2011, NT1 - 2017, RX8 - 2012, NT1 - 2010, NT1 - 2015, RX8 - 2011, RX8 - 2014, NT1 - 2016, NT1R - 2010, NT1 - 2009, NT1 - 2014, NT1 WE - 2010, NT1 - 2007, NT1 - 2013, NT1 PRO - 2012, RX8 - 2016, XRAY
Molded composite 5.8 ball joints for steering & servo linkages. Includes 4 long and 2 short ball joints.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU DIFF PIN - HARD COATED (2)
2.30 €
XB8 - 2016, XB8E - 2016, XB9 - 2012, XB8 - 2005, XB8-EC - 2007, XB8R, XT9 - 2013, XB8-TQ - 2006, XB8E - 2015, XT8 - 2009, XB808 - 2008, XB808E - 2010, XB9 - 2013, XB808 - 2009, XB8 - 2014, XB9E - 2013, XB808 - 2010, XB8 - 2015, XT8 - 2007, XB808 - 2011, XRAY
Alu hardcoated pins for gear differential are CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long life....
In stock
+ −
Add to wish list Add to comparison list
XRAY, BEVEL DRIVE GEAR 10T
5.80 €
XT8 - 2017, XB808E - 2010, XT8 - 2009, XB808 - 2009, XT9 - 2013, XB808 - 2010, XB808 - 2011, XB808 - 2008, XT8 - 2007, XRAY
10-tooth bevel drive gear for front/rear differential. Precision machined on a special gear machine.
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 COMPOSITE SERVO SAVER
1.90 €
XB808 - 2008, XB808 - 2010, XB808 - 2011, XB808E - 2010, XB808 - 2009, XRAY
Molded composite parts for XB808 servo saver.
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 COMPOSITE REAR LOWER SUSP. HOLDERS SET
1.60 €
XB9 - 2013, XB808E - 2010, XB9E - 2013, XB808 - 2011, XB808 - 2010, XB808 - 2009, XB808 - 2008, XB9 - 2012, XRAY
Set of rear lower suspension pin holders for XB808, made from tough composite. Composite suspension holders are the lightest solution to keep...
In stock
+ −
Add to wish list Add to comparison list
XRAY, SCREW FOR EXTERNAL DIFF ADJUSTMENT - HUDY SPRING STEEL™
1.90 €
T2'007 - EU - 2007, T2R - 2006, T1 EVO2 - 2002, T3R - 2010, T2 - 2006, T2'009 - US - 2009, T1 - 2001, T3 - US - 2010, T1R, T2'009 - EU - 2009, T3 - EU - 2010, T1FK'05 - 2005, T2'008 - US - 2008, T3 - 2012, T1FK - 2004, T2'008 - EU - 2008, T3 - 2011, T1 MINI, T2'007 - US - 2007, T2R PRO - 2009, T1 EVO2 - 2003, XRAY
Special screw for external diff adjustment. Manufactured exclusively by HUDY from world-renowned top-secret "Hudy Spring Steel".
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 ALU CASTER BLOCK 14° LEFT - SWISS 7075 T6 - HARD COATED --- Replaced with #352284
13.99 €
XB808 - 2008, XB9 - 2012, XB9E - 2013, XB808E - 2010, XB808 - 2010, XB808 - 2011, XB808 - 2009, XB9 - 2013, XRAY
Authentic XRAY left-side 14° alu caster block for XB808 is CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life....
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE REAR BRACE - LONG - V2
4.60 €
XB8 - 2014, XB9 - 2013, XB8 - 2005, XB8R, XT8 - 2007, XB8E - 2015, XT8 - 2009, XB8-TQ - 2006, XT9 - 2013, XB8-EC - 2007, XB8 - 2015, XB9E - 2013, XRAY
Rear brace made from tough molded composite. Using the composite brace will make the car more flexible and more forgiving, thus making the car easier to...
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 ALU CASTER BLOCK 14° RIGHT - SWISS 7075 T6 - HARD COATED --- Replaced with #352274
13.99 €
XB9E - 2013, XB808 - 2010, XB808 - 2009, XB808 - 2008, XB808E - 2010, XB9 - 2012, XB9 - 2013, XB808 - 2011, XRAY
Authentic XRAY right-side 14° alu caster block for XB808 is CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ADJ. TURNBUCKLE M5 L/R 28 MM - HUDY SPRING STEEL (2)
3.50 €
XB8 - 2015, XB8E - 2015, XB8 - 2014, XRAY
Adjustable left & right M5 turnbuckles manufactured from special blend of HUDY Spring Steel™ which is specifically formulated for turnbuckles. These...
In stock
+ −
Add to wish list Add to comparison list
XRAY, DRIVE SHAFT COUPLING - HUDY SPRING STEEL
12.99 €
XB2 Carpet - 2016, NT1 - 2012, T2R - 2006, NT1 - 2014, XB4 - 2014, T3R - 2010, T2 - 2006, XT2 - 2017, T4 - 2018, NT1 - 2011, T2'009 - US - 2009, XB4 - 2013, NT1 - 2013, T3 - US - 2010, NT1 WE - 2010, XB4 2WD- 2014, T4 - 2017, NT1 - 2010, T2'009 - EU - 2009, XB2 Dirt - 2017, T3 - EU - 2010, NT1 PRO - 2012, XB4 - 2018, T4 - 2016, T2'008 - US - 2008, NT1 - 2009, XB2 Dirt - 2016, T3 - 2012, NT1 - 2017, XB4 - 2017, T4 - 2015, T2'008 - EU - 2008, XB2 Carpet - 2018, T3 - 2011, NT1 - 2016, XB4 - 2016, T4 - 2014, T2'007 - US - 2007, XB2 Carpet - 2017, T2R PRO - 2009, NT1 - 2015, XB4 - 2015, T4 - 2013, T2'007 - EU - 2007, XRAY
Hudy Spring Steel™ drive shaft coupling for Set Screw for increased reliability, works in front and rear CVD drive shafts of XRAY T2, T3. Specially...
In stock
+ −
Add to wish list Add to comparison list
XRAY, CLUTCH BELL 21T WITH BEARINGS
7.90 €
NT18, NT18MT, NT18T, XRAY
21-tooth clutch bell for NT18 made from HUDY steel. Precision machined on a special gear machine. Includes two 4x7x2.5 bearings.
In stock
+ −
Add to wish list Add to comparison list
UNIVERSAL DRIVE SHAFT - HUDY SPRING STEEL™
44.20 €
XB8-2019, XB8-2018, XB8 - 2017, XB8 - 2016, XB8E - 2017, XB8E - 2016, XRAY
All-new front & rear universal drive shafts are used on the XB8 to generate more traction and have less resistance in the front when maximum steering...
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 REAR SHOCK SHAFT (2)
3.90 €
XT8 - 2009, XB808 - 2009, XB808 - 2010, XB808 - 2011, XT8 - 2007, XB808 - 2008, XB808E - 2010, XRAY
Rear shock shaft for XB808 made from large diameter hardened steel. Polished for smooth operation. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY, HIGH-SPEED BALL-BEARING 10x16x4 RUBBER SEALED (2)
10.99 €
NT1 - 2013, NT1 - 2014, NT1R - 2010, NT1 - 2007, NT1 - 2015, NT1 WE - 2010, NT1 - 2009, NT1 PRO - 2012, NT1 - 2010, NT1 EC - 2009, NT1 - 2011, NT1 - 2017, NT1 - 2012, NT1 - 2016, XRAY
New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 10x16x4. Set of 2 pieces.   Top-quality...
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE STEERING BLOCK LEFT - V2
9.99 €
NT1 - 2009, NT1 - 2014, NT1 - 2007, NT1 - 2013, NT1 PRO - 2012, NT1 - 2012, NT1 WE - 2010, NT1 - 2011, NT1R - 2010, NT1 - 2010, NT1 EC - 2009, XRAY
Molded composite left-side steering block.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ADJ. TURNBUCKLE M4 L/R 52.5 MM - HUDY SPRING STEEL - V3 (2)
3.90 €
XB8E - 2017, XB8 - 2016, XB808E - 2010, XB9 - 2012, XB8 - 2015, XB808 - 2011, XB8 - 2014, XB808 - 2010, GTX - 2017, XB808 - 2009, XB8E - 2015, XB808 - 2008, XB8E - 2016, XB8 - 2017, XRAY
Adjustable left & right M4 turnbuckles manufactured from special HUDY Spring Steel™ material for turnbuckles, resulting in stronger turnbuckles with a...
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 COMPOSITE SHOCK 6-HOLE PISTON SET (1.3; 1.4; 1.5MM)
1.90 €
XB808 - 2010, XT8 - 2007, XB808 - 2008, XT8 - 2009, XB808 - 2009, XRAY
Set of composite molded 6-hole shock pistons for 2 shock absorbers. Pistons are available with 3 different sized holes for changing damping: 1.3, 1.4, and...
In stock
+ −
Add to wish list Add to comparison list
XRAY, HEX SCREW SH M3x10 (10)
5.99 €
NT1 - 2012, T3 - 2012, T1 EVO2 - 2003, XB8 - 2005, X12 - 2017, X12 - 2014, XB9 - 2013, XB4 - 2018, NT1 PRO - 2012, XB8E - 2016, XT8 - 2009, NT1R - 2010, T4 - 2016, X10 GT - 2016, T2'008 - EU - 2008, NT1 - 2013, XB808 - 2008, NT1 - 2011, T3 - EU - 2010, T1 MINI, XB8 - 2014, X12 - 2016, X12 - 2015, NT1 EC - 2009, XB8E - 2017, XB4 - 2014, XB4 2WD- 2014, XT8 - 2017, NT1 - 2016, T4 - 2017, X10 GT - 2015, T2'008 - US - 2008, NT1 - 2014, XB808 - 2009, NT1 - 2010, T3 - US - 2010, T1FK - 2004, XB8 - 2015, XB2 Carpet - 2018, X12 - 2012, NT1 - 2015, XB8R, XB4 - 2015, XT9 - 2013, XB2 Carpet - 2017, T4 - 2018, X10 GT - 2009, NT1 - 2007, XB808 - 2010, NT1 - 2009, T3R - 2010, RX8 - 2017, XB4 - 2013, T1R, XB8 - 2016, RX8 - 2016, XB9 - 2012, XB4 - 2016, XB2 Carpet - 2016, X1 - 2015, T2'009 - EU - 2009, X1 - 2018, GTX - 2017, XB808 - 2011, NT1 - 2017, T4 - 2013, T1 - 2001, XB2 Dirt - 2016, T2 - 2006, XB8 - 2017, RX8 - 2014, T2R PRO - 2009, T1FK'05 - 2005, X12 US - 2018, X1 - 2016, T2'009 - US - 2009, XB9E - 2013, XB2 Dirt - 2017, XB808E - 2010, RX8 - 2012, T4 - 2014, XT2 - 2017, X10 GT - 2018, T2'007 - EU - 2007, XB8-EC - 2007, RX8 - 2013, T3 - 2011, T1 EVO2 - 2002, X12 EU - 2018, X1 - 2017, T2R - 2006, XB4 - 2017, NT1 WE - 2010, XB8E - 2015, RX8 - 2011, T4 - 2015, XT8 - 2007, X10 LINK GT - 2010, T2'007 - US - 2007, XB8-TQ - 2006, XRAY
M3x14 button-head machine screw, hex drive. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, HARDENED SHOCK SHAFT - SHORT (2)
3.90 €
T2'008 - US - 2008, T3 - 2011, T2'008 - EU - 2008, T2R PRO - 2009, T3 - US - 2010, T2'009 - US - 2009, T3R - 2010, T2'009 - EU - 2009, T3 - EU - 2010, T3 - 2012, XRAY
Hardened, high-strength short shock shafts for use with #308302 XRAY short shock absorbers. Polished for super-smooth operation. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 COMPOSITE CASTER BLOCK 12° LEFT - HAND MODIFIED
3.99 €
XB808 - 2008, XB9 - 2013, XB9 - 2012, XB808E - 2010, XB808 - 2011, XB808 - 2010, XB808 - 2009, XB9E - 2013, XRAY
Left-side 12° caster block for XB808 made from tough molded composite. Hand-modified with the artisan skills of experienced XRAY craftsmen. The preset...
In stock
+ −
Add to wish list Add to comparison list
XRAY, BRASS CHASSIS WEIGHT FRONT 20g
6.90 €
RX8 - 2011, RX8 - 2013, RX8 - 2014, RX8 - 2012, XRAY
Precision-machined brass chassis balancing weight. Designed for XRAY RX8 chassis with front and rear weight integration hole. Marked with the weight value...
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 COMPOSITE CASTER BLOCK 10° RIGHT
3.99 €
XB808 - 2008, XB9 - 2012, XB9E - 2013, XB808E - 2010, XB808 - 2010, XB808 - 2011, XB808 - 2009, XB9 - 2013, XRAY
Right-side 10° caster block for XB808 made from tough molded composite.  The 10° caster block is integrated and non-adjustable. Combined with the...
In stock
+ −
Add to wish list Add to comparison list
XRAY, XCA ALU 7075 T6 HARDCOATED PINION GEAR - 23T (2ND)
16.90 €
NT1 WE - 2010, NT1 - 2009, NT1 EC - 2009, NT1R - 2010, NT1 - 2015, NT1 - 2010, RX8 - 2014, NT1 - 2016, NT1 - 2011, NT1 - 2014, NT1 - 2012, NT1 - 2013, NT1 PRO - 2012, NT1 - 2007, NT1 - 2017, XRAY
High-strength 23T pinion gear (2nd gear) for the XRAY NT1 are made from tough 7075 T6 alu and specially hardcoated for supreme strength, light...
In stock
+ −
Add to wish list Add to comparison list
XRAY, SPRING 4.75 COILS 3.6x6x0.55MM; C=4.0 - SILVER (2)
4.99 €
X1 - 2017, X10 LINK GT - 2010, X12 - 2015, X1 - 2015, X12 - 2012, X12 - 2016, X1 - 2016, X10 GT - 2016, X12 - 2017, X12 US - 2018, X10 GT - 2009, X12 EU - 2018, X10 GT - 2015, X12 - 2014, X1 - 2018, X10 GT - 2018, XRAY
Ultimate-match front coil shock springs for pan car front suspension offer an additional range of choices to fine-tune your car. Powder color-coded...
In stock
+ −
Add to wish list Add to comparison list
XRAY, O-RING 8x1 (10)
5.99 €
XT2 - 2017, XB2 Carpet - 2016, XB4 - 2015, XB2 Carpet - 2017, XB4 - 2017, XB2 Carpet - 2018, XB4 - 2018, XB2 Dirt - 2016, XB4 - 2014, XB2 Dirt - 2017, XB4 2WD- 2014, XB4 - 2013, XB4 - 2016, XRAY
Rubber O-ring 1.0mm thick x 8mm dia. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, SET OF BATTERY BACKSTOPS
2.90 €
T2'007 - EU - 2007, T2R - 2006, X10 LINK GT - 2010, T2 - 2006, T2'009 - US - 2009, X10 GT - 2009, T1FK'05 - 2005, T2'009 - EU - 2009, T3R - 2010, T2'008 - US - 2008, T3 - US - 2010, T2'008 - EU - 2008, T3 - EU - 2010, T2'007 - US - 2007, T2R PRO - 2009, XRAY
Set of six molded composite battery backstops for XRAY T1FK’05 and T2.
In stock
+ −
Add to wish list Add to comparison list
XRAY, SERVO BALL JOINT 5.8MM (4)
6.99 €
XB8 - 2017, XB808 - 2011, XB9E - 2013, XB9 - 2012, XB8 - 2016, XB808 - 2010, XT8 - 2007, XB8R, XB8 - 2015, XB808 - 2009, XT8 - 2009, XB8E - 2017, XB8 - 2014, XB808 - 2008, XT8 - 2017, XB8E - 2016, XB8 - 2005, XB8-TQ - 2006, XT9 - 2013, XB8E - 2015, GTX - 2017, XB8-EC - 2007, XB808E - 2010, XB9 - 2013, XRAY
Servo linkage ball joint fits 5.8mm ball. Set of 4.
In stock
+ −
Add to wish list Add to comparison list
XRAY, HEX SCREW SOCKET HEAD CAP M3x16 (10)
5.99 €
NT1 - 2014, NT1 WE - 2010, NT1 - 2012, NT1 - 2007, NT1 PRO - 2012, NT1 - 2013, NT1 EC - 2009, NT1 - 2011, NT1 - 2017, NT1 - 2016, NT1 - 2010, NT1 - 2015, NT1 - 2009, NT1R - 2010, XRAY
M3x16 socket-head cap screw, hex drive. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, GRAPHITE RADIO PLATE - FLEX - V5
17.90 €
NT1 - 2009, NT1 PRO - 2012, NT1 - 2007, NT1 EC - 2009, NT1R - 2010, NT1 - 2011, NT1 - 2012, NT1 WE - 2010, NT1 - 2010, XRAY
CNC-machined radio plate for NT1 is made from top-quality graphite material. Strategically-placed cutouts allow quick & easy adjustment of linkages.
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE BELT PULLEY 18T - 2-SPEED-SIDE
9.99 €
NT1 WE - 2010, NT1 - 2011, NT1 - 2017, NT1R - 2010, NT1 EC - 2009, NT1 - 2016, NT1 - 2010, NT1 - 2015, NT1 - 2009, NT1 - 2014, NT1 - 2007, NT1 - 2013, NT1 PRO - 2012, NT1 - 2012, XRAY
Molded composite 18T side belt pulley on main layshaft, drives side belt.
In stock
+ −
Add to wish list Add to comparison list
XRAY, REAR LOWER INNER PIVOT PIN (2)
9.99 €
NT1 - 2018, NT1 - 2017, XRAY
Rear lower inner pivot pins 3x50 mm. Hardened for very high durability and long life. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
COMPOSITE 2-SPEED GEAR 46T (2nd) - H
13.99 €
GTX - 2017, RX8 - 2012, RX8 - 2013, RX8 - 2014, RX8 - 2011, XRAY
XRAY precision-molded 47T spur gear (2nd gear) made from special composite material with optimal balance of hardness, toughness, and flexibility. Gives long...
In stock
+ −
Add to wish list Add to comparison list
XRAY FACE MASK
14.99 €
In stock
+ −
Add to wish list Add to comparison list
XRAY, FRONT UPPER PIVOT PIN (2)
6.40 €
NT1 - 2009, NT1 EC - 2009, NT1 - 2014, NT1 - 2007, NT1 - 2013, NT1 WE - 2010, NT1 - 2012, NT1R - 2010, NT1 - 2011, NT1 - 2010, NT1 PRO - 2012, XRAY
Front upper inner pivot pins for NT1. Hardened for very high durability and long life. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY 301322 FRONT BODY MOUNT SET 6MM
11.99 €
NT1 EC - 2009, T3 - EU - 2010, NT1R - 2010, NT1 - 2013, T4 - 2017, T2'008 - EU - 2008, T2'009 - EU - 2009, T3 - US - 2010, T2R PRO - 2009, NT1 - 2012, T4 - 2018, T2'007 - US - 2007, NT1 - 2017, T3R - 2010, NT1 WE - 2010, NT1 - 2011, T4-2019, T2'007 - EU - 2007, NT1 - 2016, T4 - 2013, T2R - 2006, NT1 - 2010, XT2 - 2017, T3 - 2012, T2'008 - US - 2008, T4 - 2014, NT1 PRO - 2012, NT1 - 2009, T2 - 2006, NT1 - 2015, T4 - 2015, T2'009 - US - 2009, NT1 - 2007, T3 - 2011, NT1 - 2014, T4 - 2016, XRAY
Front body mount set includes redesigned 6mm-thick bodyposts and all other mounting hardware. Fits XRAY T2 and NT1. Update: Composite brace for bumper not...
In stock
+ −
Add to wish list Add to comparison list
XRAY, SERVO SAVER PLASTIC COVER - ECCENTRIC (2)
1.00 €
T1FK'05 - 2005, T2'009 - EU - 2009, T3R - 2010, T1FK - 2004, T2'008 - US - 2008, T3 - US - 2010, T1 MINI, T2'008 - EU - 2008, T3 - EU - 2010, T1 EVO2 - 2003, T2'007 - US - 2007, T2R PRO - 2009, T1 EVO2 - 2002, T2'007 - EU - 2007, T2R - 2006, T1 - 2001, T2 - 2006, T2'009 - US - 2009, XRAY
Set of two molded bearing holders with eccentric positions. Allows servo saver to be positioned according to steering servo mounting.
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE REAR WING MOUNT BRACE (2)
2.90 €
XB8 - 2017, XB808 - 2010, XT8 - 2007, XB8R, XB8 - 2016, XB808 - 2009, XT8 - 2009, XB8E - 2017, XB8 - 2015, XB808 - 2008, XT8 - 2017, XB8E - 2016, XB8 - 2014, XB8-TQ - 2006, XT9 - 2013, XB8E - 2015, XB8 - 2005, XB8-EC - 2007, XB808E - 2010, XB9 - 2013, XB9 - 2012, XB808 - 2011, XB9E - 2013, XRAY
Rear wing mounting braces made from tough molded composite material. Set of self-tapping screws included.
In stock
+ −
Add to wish list Add to comparison list
REAR FOAM TIRE MOUNTED WITH HEX HUB (35DEG) - SOFT
9.99 €
NT18, M18 PRO LiPo, M18, M18 PRO, XRAY
Mounted rear foam tires (35deg - soft) on solid dish rims for use with drive shafts with hex adaptors ONLY. Will not fit on original M18 with original wheel...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU ECCENTRIC BUSHING 0.0MM (2) --- Replaced with #372316-O
5.90 €
X10 GT - 2015, X12 - 2017, X12 - 2016, X12 US - 2018, X12 - 2015, X12 - 2014, X10 GT - 2018, X10 GT - 2016, X12 EU - 2018, XRAY
Smart eccentric aluminum inserts which allow quick and easy change and track-width set-up according to track conditions. Optional eccentric aluminum 0.5mm...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU FRONT LOWER SUSP. HOLDER - REAR - 7075 T6 (5MM)
5.90 €
XB8-TQ - 2006, XB8-EC - 2007, XB8 - 2005, XT8 - 2007, XT8 - 2009, XB8R, XRAY
Front lower suspension holder for REAR of front bulkhead. Made from 5mm CNC-machined, highest-grade 7075 T6 aircraft aluminum. Xray stylish black finish...
In stock
+ −
Add to wish list Add to comparison list
X1 Fully Independent Rear Wing Mount Set
68.90 €
X1 - 2017, X1 - 2018, X1 - 2015, X1-2019, X1 - 2016, XRAY
This wing mount set allows to install rear wing fully independently from the rear pod plate. When the rear suspension is moving the wing stays in the same...
In stock
+ −
Add to wish list Add to comparison list
XRAY, HEX SCREW SFH M2.5x8 (10)
8.99 €
NT1 - 2007, XB4 - 2013, NT1 - 2014, XB4 2WD- 2014, NT1 - 2012, NT1R - 2010, NT1 - 2009, XB4 - 2018, NT1 - 2013, NT1 WE - 2010, XB4 - 2017, NT1 PRO - 2012, NT1 - 2011, XB4 - 2016, NT1 - 2016, NT1 - 2010, XB4 - 2015, NT1 - 2017, NT1 - 2015, XB4 - 2014, NT1 EC - 2009, XRAY
M2.5x8 flat-head machine screw, hex drive. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, SHOCK BALL JOINT - OPEN (4)
10.99 €
NT1 - 2016, X1 - 2018, T2R PRO - 2009, X1 - 2016, RX8 - 2011, NT1 - 2009, T4 - 2014, T2'008 - EU - 2008, NT1 - 2015, T3 - 2011, NT1R - 2010, X1 - 2017, NT1 - 2007, T4 - 2015, T2'007 - US - 2007, NT1 - 2014, T3 - 2012, NT1 WE - 2010, T2'008 - US - 2008, T4 - 2016, T2'007 - EU - 2007, NT1 - 2013, T3 - EU - 2010, NT1 PRO - 2012, T2'009 - EU - 2009, T4 - 2017, T2 - 2006, NT1 - 2012, T3 - US - 2010, NT1 EC - 2009, T2'009 - US - 2009, T4 - 2018, RX8 - 2014, NT1 - 2011, T3R - 2010, NT1 - 2017, T2R - 2006, X1 - 2015, RX8 - 2012, NT1 - 2010, T4 - 2013, XRAY
Molded composite ball joints for ends of XRAY T2, T3 shock shafts. Set of four.
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 FRONT UPPER ARM BALL JOINT (2) - V2
1.90 €
XB808 - 2008, XB9 - 2013, XB9 - 2012, XB808E - 2010, XB808 - 2011, XB808 - 2010, XB808 - 2009, XB9E - 2013, XRAY
Front upper suspension arm inner ball joint for XB808 made from tough molded composite. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE STEERING BLOCK -1° KINGPIN LEFT
3.90 €
RX8 - 2016, RX8 - 2013, RX8 - 2012, RX8 - 2011, RX8 - 2017, RX8 - 2014, XRAY
Molded-composite left steering block for XRAY RX8 with built-in –1° kingpin angle. Marked "L" and "–" for easy identification. Use with matching #342212...
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 ALU SHOCK BODY NUT (2)
2.60 €
XB808 - 2008, XRAY
Black hardcoated aluminum shock body nut. The entire lower shock assembly is secured with the new lower aluminum shock cap which makes assembly/disassembly...
In stock
+ −
Add to wish list Add to comparison list
XRAY, MUFFLER RUBBER CONNECTOR
1.90 €
NT18T, NT18MT, NT18, XRAY
Tough rubber muffler connector for NT18T pipe set.
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 ALU FRONT LOWER SUSP. HOLDER - REAR - SWISS 7075 T6 (7MM) - HARD COATED
6.40 €
XB808 - 2008, XB9 - 2013, XB9 - 2012, XB808E - 2010, XB808 - 2011, XB808 - 2009, XB808 - 2010, XB9E - 2013, XRAY
Authentic XRAY alu front lower suspension holder for the REAR of the front bulkhead on the XB808. CNC-machined from 7mm premium Swiss 7075 T6 aluminum,...
In stock
+ −
Add to wish list Add to comparison list
XRAY, REAR SOLID AXLE - LIGHTWEIGHT - SET
14.99 €
RX8 - 2011, RX8 - 2013, RX8 - 2014, RX8 - 2012, XRAY
Rear solid axle set includes lightweight axle shaft, pulley, and hardware. Axle body is manufactured from HUDY Spring Steel™ and has been strategically...
Out of stock
Out of stock Add to wish list Add to comparison list
XRAY, XB808 ALU CASTER BLOCK 12° RIGHT - SWISS 7075 T6 - HARD COATED --- Replaced with #352272
13.99 €
XB9 - 2013, XB808 - 2010, XB9E - 2013, XB808 - 2009, XB808 - 2008, XB808 - 2011, XB9 - 2012, XB808E - 2010, XRAY
Authentic XRAY right-side 12° alu caster block for XB808 is CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability...
In stock
+ −
Add to wish list Add to comparison list
ΧΡΑΥ, SHOCK TOWER FRONT - GRAPHITE 3.0MM
7.90 €
T3 - 2012, XRAY
CNC-machined front shock tower made from 3.0mm thick premium-grade graphite material to guarantee maximum strength and long life. Low height allows the new...
In stock
+ −
Add to wish list Add to comparison list
XRAY, REAR SPRING SET C=0.47 - WHITE (2)
7.50 €
XB808E - 2010, XB8 - 2015, XB9E - 2013, XB8E - 2015, XB8 - 2016, XB8E - 2016, XB8 - 2014, XB8 - 2017, XB8E - 2017, XB808 - 2011, XB808 - 2008, XB9 - 2012, XT8 - 2017, XB808 - 2009, XB9 - 2013, XT9 - 2013, XT8 - 2009, XB808 - 2010, XRAY
New ultimate-match rear shock springs (C = 0.47) for XRAY rear shocks. White color. Set of 2. XRAY presents the ultimate high-performance racing...
In stock
+ −
Add to wish list Add to comparison list
XRAY, BEVEL DRIVE GEAR 12T
14.99 €
XB9 - 2013, XB8 - 2016, XB8E - 2017, XB9E - 2013, XB8R, XB8E - 2016, XB8 - 2015, XB8E - 2015, XB8 - 2014, XB8-TQ - 2006, XB8 - 2005, XB8-EC - 2007, XB9 - 2012, XB8 - 2017, XRAY
12-tooth bevel drive gear for front/rear differential. Precision machined on a special gear machine.
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE TRANSPORDER MOUNT
1.30 €
T1R, T1FK'05 - 2005, T1FK - 2004, T1 MINI, T1 EVO2 - 2003, T1 EVO2 - 2002, T1 - 2001, XRAY
Molded transpoder mount, can be mounted on left or right side of 301117 composite chassis.
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE BELT PULLEY 26T - MID-SIDE
6.99 €
NT1 WE - 2010, NT1 - 2012, NT1 PRO - 2012, NT1R - 2010, NT1 EC - 2009, NT1 - 2017, NT1 - 2011, NT1 - 2016, NT1 - 2010, NT1 - 2015, NT1 - 2009, NT1 - 2014, NT1 - 2007, NT1 - 2013, XRAY
Molded composite 26T mid-side belt pulley. Gives neutral 1:1 overdrive ratio.
In stock
+ −
Add to wish list Add to comparison list
XRAY, FRONT LOWER SUSPENSION ARM LEFT
3.50 €
XT8 - 2017, XT8 - 2009, XT9 - 2013, XT8 - 2007, XRAY
Front lower left suspension arm made from super-tough high-tech composite material. The super-long arms provide maximum stability and optimum...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU STEERING PLATE 7075 T6 (3MM)
3.90 €
XT9 - 2013, XB8R, XB8-TQ - 2006, XB8-EC - 2007, XB8 - 2005, XT8 - 2009, XT8 - 2007, XRAY
Steering plate made of 3mm CNC-machined, highest-grade 7075 T6 aircraft aluminum. Xray stylish black finish with silver edging. Multiple steering linkage...
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE DUAL SERVO SAVER ARM (L+R)
2.30 €
T3 - 2011, XRAY
Set of 2 molded composite arms for dual servo saver : left + right.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU LABYRINTH DUST COVER FOR CLUTCH BELL
1.80 €
XB808 - 2008, XB808 - 2010, XB808 - 2011, XB808 - 2009, XRAY
Machined aluminum Labyrinth Cover fits all XRAY clutch bells to prevent dirt from entering the clutch assembly. Especially effective when used with V2...
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE BEVEL GEAR BUSHING (2)
2.90 €
XB4 - 2014, XB4 - 2018, XB4 - 2017, XB4 - 2016, XB4 - 2015, XB4 - 2013, XB4 2WD- 2014, XRAY
Tough composite bushing for use with Steel Differential Bevel Gear. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU ADJ. TURNBUCKLE 64MM M5 L/R - SWISS 7075 T6 (2)
8.99 €
XB9E - 2013, XB808 - 2010, XB808 - 2009, XB808 - 2008, XB808E - 2010, XB9 - 2012, XB9 - 2013, XB808 - 2011, XRAY
Adjustable left & right M5 steering turnbuckles manufactured from strong, lightweight 7075 T6 aluminum. Precision threading for fine toe adjustment....
In stock
+ −
Add to wish list Add to comparison list
XRAY, SPRING-SET C=3.2 (2)
9.99 €
T2 - 2006, T2'009 - US - 2009, T3R - 2010, T3 - US - 2010, T1R, T2'009 - EU - 2009, X1 - 2015, T3 - 2012, T1FK'05 - 2005, T2'008 - US - 2008, X1 - 2016, T3 - EU - 2010, T1FK - 2004, T2'008 - EU - 2008, T3 - 2011, T1 MINI, T2'007 - US - 2007, T2R PRO - 2009, T1 EVO2 - 2003, T2'007 - EU - 2007, T2R - 2006, T1 EVO2 - 2002, XRAY
New ultimate-match shock springs (C = 3.2) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (3.2) on top spring coil for easy...
In stock
+ −
Add to wish list Add to comparison list
XRAY, HEX SCREW SH M3x16 (10)
4.99 €
XB808E - 2010, NT1 - 2009, RX8 - 2014, NT1 WE - 2010, T3 - US - 2010, XB9 - 2013, T2'008 - EU - 2008, XB8 - 2017, NT1 - 2015, T3 - 2012, XT9 - 2013, XB2 Carpet - 2018, XB808 - 2011, NT1 - 2010, T2 - 2006, T2'009 - US - 2009, XB9 - 2012, NT1 - 2017, T3 - EU - 2010, XB8 - 2016, NT1 - 2007, T3R - 2010, XT8 - 2017, XB4 2WD- 2014, XB808 - 2010, NT1 - 2011, XB2 Dirt - 2017, T2'009 - EU - 2009, XB8R, NT1R - 2010, XB8 - 2015, NT1 - 2013, T4 - 2013, XT8 - 2009, XB4 - 2017, XB808 - 2009, RX8 - 2012, T2R - 2006, XB2 Dirt - 2016, XB8E - 2017, RX8 - 2011, XB8 - 2014, NT1 - 2012, XB2 Carpet - 2016, XT8 - 2007, XB4 - 2016, XB808 - 2008, RX8 - 2013, T2'007 - EU - 2007, XB4 - 2013, XB8E - 2016, NT1 PRO - 2012, XB8 - 2005, XB2 Carpet - 2017, XT2 - 2017, XB4 - 2018, XB8-TQ - 2006, NT1 - 2016, T2'007 - US - 2007, XB4 - 2015, XB8E - 2015, NT1 EC - 2009, GTX - 2017, T3 - 2011, XB9E - 2013, T2'008 - US - 2008, XB8-EC - 2007, NT1 - 2014, T2R PRO - 2009, XB4 - 2014, XRAY
M3x16 button-head machine screw, hex drive. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, SET OF ALU SHIM (0.5MM, 1.5MM, 2.5MM)
10.99 €
NT1 WE - 2010, X12 - 2016, NT1 - 2012, T1FK'05 - 2005, XB4 - 2017, NT1 - 2010, T3 - US - 2010, X10 GT - 2016, RX8 - 2017, XB2 Dirt - 2016, T2'009 - EU - 2009, T4 - 2016, X1 - 2015, NT1R - 2010, X12 - 2017, NT1 - 2013, T1R, XB4 - 2018, T3R - 2010, X10 GT - 2018, NT1 - 2011, T1 - 2001, XB2 Dirt - 2017, T2'009 - US - 2009, T4 - 2013, X1 - 2016, RX8 - 2011, X12 EU - 2018, NT1 - 2014, T2 - 2006, XB4 2WD- 2014, T3 - 2011, X10 LINK GT - 2010, T1 EVO2 - 2002, XB4 - 2013, NT1 EC - 2009, T4 - 2014, X1 - 2017, RX8 - 2012, X12 US - 2018, T2'007 - EU - 2007, XT2 - 2017, NT1 - 2015, T2R PRO - 2009, X12 - 2012, T1 EVO2 - 2003, XB4 - 2014, NT1 - 2017, T4 - 2015, X1 - 2018, RX8 - 2013, XB2 Carpet - 2016, T2'007 - US - 2007, NT1 - 2016, T2R - 2006, X12 - 2014, T1 MINI, XB4 - 2015, NT1 - 2007, T3 - 2012, X10 GT - 2009, RX8 - 2014, XB2 Carpet - 2017, T2'008 - EU - 2008, T4 - 2017, NT1 PRO - 2012, X12 - 2015, T1FK - 2004, XB4 - 2016, NT1 - 2009, T3 - EU - 2010, X10 GT - 2015, RX8 - 2016, XB2 Carpet - 2018, T2'008 - US - 2008, T4 - 2018, XRAY
Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:  • front and rear roll center   • front bump...
In stock
+ −
Add to wish list Add to comparison list
XRAY, GRAPHITE BRACE FOR FLEX RADIO PLATE 2.5MM
10.90 €
NT1 - 2014, NT1 - 2012, NT1 - 2013, NT1 PRO - 2012, XRAY
Front reinforcement brace for NT1 stiffens the front of the car for high-traction conditions.
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 CVD DRIVE SHAFT COUPLING THREADED - HUDY SPRING STEEL™
2.00 €
XB808 - 2008, XB808 - 2010, XB808 - 2011, XB808E - 2010, XB808 - 2009, XRAY
CVD drive shaft coupling for XB808 CVD drive shafts made from world-renown Hudy Spring Steel™. Specially hand-ground for maximum precision. Uses a setscrew...
In stock
+ −
Add to wish list Add to comparison list
XRAY 355261 - XB8 2016 Alu Wheel Nut - Ribbed - Hard Coated (2)
14.99 €
XB808 - 2011, XB9 - 2012, XB8 - 2016, XT9 - 2013, XB808 - 2010, XB8R, XB8 - 2015, XT8 - 2017, XB808 - 2009, XB8E - 2017, XB8 - 2014, XT8 - 2009, XB808 - 2008, XB8E - 2016, XB8 - 2005, XT8 - 2007, XB8-TQ - 2006, XB8E - 2015, GTX - 2017, XB9E - 2013, XB8-EC - 2007, XB808E - 2010, XB9 - 2013, XB8 - 2017, XRAY
In stock
+ −
Add to wish list Add to comparison list
XRAY, FRONT ARM PIVOT PIN (2)
4.90 €
T2R - 2006, T3R - 2010, T2 - 2006, T4 - 2018, T2'009 - US - 2009, T3 - US - 2010, T4 - 2017, T2'009 - EU - 2009, T3 - EU - 2010, T4 - 2016, T2'008 - US - 2008, T3 - 2012, T4 - 2015, T2'008 - EU - 2008, T3 - 2011, T4 - 2014, T2'007 - US - 2007, T2R PRO - 2009, T4 - 2013, T2'007 - EU - 2007, XRAY
Front lower outer pivot pins for XRAY T2, T3. Hardened for very high durability and long life. Set of two.
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE GEAR DIFF. CASE & COVER
27.99 €
T3R - 2010, T4 - 2017, T3 - US - 2010, T4 - 2016, T3 - EU - 2010, T4 - 2015, T3 - 2012, T3 - 2011, T4 - 2014, T4 - 2013, T4 - 2018, XRAY
Gear differential case and cover made from tough composite material. Used for front or rear differentials. Fits #304900 composite gear differential.
In stock
+ −
Add to wish list Add to comparison list
XRAY, CLUTCH SHOE - RED
8.90 €
RX8 - 2016, RX8 - 2013, RX8 - 2012, RX8 - 2011, RX8 - 2017, RX8 - 2014, XRAY
CNC-machined red clutch shoe for XCA clutch. Material in this clutch shoe is hard and provides less slippage and wear rate. Recommended for medium- and...
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 ALU REAR SHOCK TOWER SWISS 7075 T6 (3MM) - HARD COATED
9.90 €
XB808 - 2008, XB9 - 2012, XB9E - 2013, XB808E - 2010, XB808 - 2010, XB808 - 2011, XB808 - 2009, XB9 - 2013, XRAY
Authentic XRAY rear alu shock tower for XB808 is CNC-machined from 3mm thick premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life....
In stock
+ −
Add to wish list Add to comparison list
XRAY, GT COMPOSITE BODY POSTS (2)
12.99 €
GTX8, GTXE, XRAY
Strong composite body posts. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
 Prev
1 2 3 4 5 6 7 8 9 10
Next