210 8089888

Items marked by the "SPARE PARTS" tag:

Products

Sort by Popularity
96 Per Page
XRAY, COMPOSITE BUMPER
9.90 €
RX8 - 2011, RX8 - 2012, XRAY
Impact-absorbing lower front bumper made from high-quality and special composite material to withstand hard impacts. Front bumper with optimized downforce...
In stock
+ −
Add to wish list Add to comparison list
HPI, A283 FLANGE SHAFT 3 x 28 mm
4.00 €
HPI
HPI, FLANGE SHAFT 3 x 28 mm
In stock
+ −
Add to wish list Add to comparison list
XRAY, CARBIDE BALL 2.4MM FOR BALL DIFFERENTIAL (12)
16.99 €
T3 - US - 2010, T1R, M18MT, T2'009 - EU - 2009, XB2 Dirt - 2016, T3 - EU - 2010, T1FK'05 - 2005, M18 PRO LiPo, T2'008 - US - 2008, NT18T, T3 - 2012, T1FK - 2004, M18 PRO, XB2 Carpet - 2018, T2'008 - EU - 2008, NT18, T3 - 2011, T1 MINI, M18, XB2 Carpet - 2017, T2'007 - EU - 2007, NT18MT, T2R PRO - 2009, T1 EVO2 - 2003, XB2 Dirt - 2017, XB2 Carpet - 2016, T2'007 - US - 2007, M18T, T2R - 2006, T1 EVO2 - 2002, XT2 - 2017, T3R - 2010, T2 - 2006, M18T PRO, T2'009 - US - 2009, T1 - 2001, XRAY
Carbide balls 2.4mm for ball differential. Improved, smoother diff operation over standard steel diff balls. These carbide balls are much harder than the...
In stock
+ −
Add to wish list Add to comparison list
XRAY, T4 ANTI-ROLL BAR REAR 1.3 MM
2.10 €
T4 - 2014, T4 - 2013, XRAY
The T4 rear anti-roll bars for narrowed bulkheads for super-fine tuning. For easy recognition the anti-roll bars have laser-engraved stripes (to indicate...
In stock
+ −
Add to wish list Add to comparison list
XRAY, FLYWHEEL - ALU 7075 T6 - HARDCOATED
17.60 €
NT1 - 2013, NT1 PRO - 2012, NT1 - 2012, NT1 WE - 2010, NT1 - 2011, NT1 - 2017, NT1R - 2010, NT1 EC - 2009, NT1 - 2016, NT1 - 2010, NT1 - 2015, NT1 - 2009, NT1 - 2014, NT1 - 2007, XRAY
XCA flywheel made from tough 7075 T6 alu and hardcoated for extra durability. Highly-polished, smooth flyweight pins are factory-pressed. Knurled outer edge...
In stock
+ −
Add to wish list Add to comparison list
HPI, REAR SUSPENSION ARM SET
25.00 €
BAJA 5B, HPI
BAJA 5B Super long suspension arms results in smooth damping characteristics and long suspension travel.
In stock
+ −
Add to wish list Add to comparison list
XRAY, OFFSET SPUR GEAR 108T / 64
9.99 €
T2'007 - EU - 2007, T3 - 2012, T1 EVO2 - 2002, T4 - 2016, T2 - 2006, T3 - EU - 2010, T1 - 2001, T4 - 2017, T1R, T3 - US - 2010, T2'009 - EU - 2009, T2'009 - US - 2009, T4 - 2018, T1FK'05 - 2005, T3R - 2010, T2'008 - US - 2008, T2R - 2006, T1FK - 2004, T4 - 2013, T2'008 - EU - 2008, T2R PRO - 2009, T1 MINI, T4 - 2014, T2'007 - US - 2007, T3 - 2011, T1 EVO2 - 2003, T4 - 2015, XRAY
XRAY precision molded offset spur gear 108 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass.
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE FRONT UPPER SUSP. ECCENTRIC BUSHING (4)
3.50 €
RX8 - 2016, RX8 - 2017, RX8 - 2013, RX8 - 2012, RX8 - 2011, RX8 - 2014, XRAY
Molded composite eccentric bushings for front upper suspension arm. Set of 4. Square eccentric bushings in front upper bulkheads allows for complete...
In stock
+ −
Add to wish list Add to comparison list
XRAY, REAR UPPER INNER CAMBER LINK BALL JOINT - V3 (2)
9.99 €
GTX - 2017, XB808 - 2011, XB808 - 2010, XB808E - 2010, XB808 - 2009, XB8E - 2015, XB808 - 2008, XB9 - 2012, XB8 - 2015, XB9 - 2013, XB8 - 2014, XB9E - 2013, XRAY
Molded composite rear upper inner camber link ball joint. Fits XB808, XB9, XB8. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 ALU REAR LOWER SUSP. HOLDER 0°-2° - FRONT - SWISS 7075 T6 (7MM) - HARD COATED
6.90 €
XB808 - 2009, XB808 - 2010, XB9E - 2013, XB808 - 2008, XB9 - 2013, XB9 - 2012, XB808E - 2010, XB808 - 2011, XRAY
Authentic XRAY alu rear lower suspension holder for the FRONT of the rear bulkhead on the XB808. CNC-machined from 7mm premium Swiss 7075 T6...
In stock
+ −
Add to wish list Add to comparison list
XRAY, T2'009 RUBBER-SPEC UPPER + REAR DECK 2.0MM GRAPHITE - SHORT- SET
10.90 €
T2R PRO - 2009, T2'009 - EU - 2009, XRAY
CNC-machined front and rear upper deck of premium-grade graphite material, specially designed and optimized for rubber-tire racing conditions with...
In stock
+ −
Add to wish list Add to comparison list
HPI, DRIVE SHAFT 56MM
13.00 €
WR8 3.0, WR8, HPI
WR8 Genuine HPI quality spare part for easy maintenance and repairs. See below for kit compatibility.
In stock
+ −
Add to wish list Add to comparison list
XRAY, PROGRESSIVE SPRINGS - SOFT-MEDIUM - 2 STRIPES (2)
7.90 €
XB808 - 2010, XT8 - 2017, XB8 - 2014, XT9 - 2013, XB8 - 2015, XB8E - 2017, XB8E - 2015, XB8 - 2016, XB9 - 2012, XB8E - 2016, XB8 - 2017, XB9 - 2013, XB808E - 2010, XB808 - 2008, XB9E - 2013, XB808 - 2011, XB808 - 2009, XRAY
New SOFT-MEDIUM progressive springs are soft at the beginning of the compression but become harder as the spring is compressed more in the middle,...
In stock
+ −
Add to wish list Add to comparison list
XRAY, T4 COMPOSITE ADJUSTMENT BALL-BEARING HUB (4)
4.90 €
T4 - 2018, T4 - 2013, T4 - 2015, T4 - 2014, T4 - 2016, T4 - 2017, XRAY
Molded composite adjustable ball-bearing hub. Set of 4
In stock
+ −
Add to wish list Add to comparison list
HPI, GEAR DIFF CASE (1PC/SPRINT)
9.99 €
SPRINT 2, SPRINT 2 FLUX, HPI
Sprint 2 Genuine HPI spare part for ensured quality, correct maintenance and easy repairs.
In stock
+ −
Add to wish list Add to comparison list
HPI, 6736 SPRING 13x40x1.1mm 9 COILS (BLACK/MEDIUM)
9.99 €
1/10, HPI
SPRING 13x40x1.1mm 9 COILS (BLACK/MEDIUM) 
In stock
+ −
Add to wish list Add to comparison list
HPI, 6544 SHOCK SPRING 14 x 25 x 1.5mm 6 COILS (GOLD/2pcs)
7.00 €
1/10, HPI
SHOCK SPRING 14 x 25 x 1.5mm 6 COILS (GOLD/2pcs)
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE STEERING BLOCK +1° KINGPIN LEFT
3.90 €
RX8 - 2011, RX8 - 2017, RX8 - 2016, RX8 - 2014, RX8 - 2013, RX8 - 2012, XRAY
Molded-composite left steering block for XRAY RX8 with built-in +1° kingpin angle. Marked "L" and "+" for easy identification. Use with matching #342211...
In stock
+ −
Add to wish list Add to comparison list
XRAY, GEAR DIFF OUTDRIVE ADAPTER - HUDY SPRING STEEL™ - V2 (2)
14.90 €
XB4 - 2016, XB4 - 2018, XB4 - 2017, XB4 2WD- 2014, XB4 - 2014, XB4 - 2015, XB4 - 2013, XRAY
The CNC-machined gear diff outdrive adaptors are super lightweight and manufactured from HUDY Spring Steel™ and are additionally hardened for extra life and...
In stock
+ −
Add to wish list Add to comparison list
XRAY, SPRING FOR GEAR BOX - HARD (2)
6.99 €
NT1 - 2017, NT1 - 2011, NT1 - 2016, NT1 - 2010, NT1 - 2014, NT1R - 2010, NT1 - 2009, NT1 - 2015, NT1 WE - 2010, NT1 - 2007, RX8 - 2014, NT1 PRO - 2012, RX8 - 2016, NT1 - 2013, NT1 EC - 2009, RX8 - 2017, NT1 - 2012, XRAY
Harder springs for #335540 Composite 2-Speed Gear Box Set allows for higher 2nd gear engagement point. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY, STEEL BRAKE PAD - LASER CUT (4) --- Replaced with #354121
9.99 €
XB8 - 2005, XB808 - 2008, XT8 - 2007, XB8-TQ - 2006, XT8 - 2009, XB8-EC - 2007, XB808 - 2009, XB8R, XRAY
High-precision, ultra-efficient steel brake pads are one of the best in the market! The steel brake pads are laser cut and afterwards precisely ground on...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU REAR LOWER SUSP. ARM HOLDER - SWISS 7075 T6
14.99 €
RX8 - 2012, RX8 - 2011, RX8 - 2013, RX8 - 2014, XRAY
Alu lower suspension holder. Ultra-strong construction for increased lifespan and durability. CNC-machined from highest-grade Swiss 7075 T6 aluminum.
In stock
+ −
Add to wish list Add to comparison list
HPI, FRONT SUSPENSION ARM SET
26.99 €
BAJA 5B, HPI
BAJA 5B Super long suspension arms results in smooth damping characteristics and long suspension travel.
In stock
+ −
Add to wish list Add to comparison list
HPI, 13T Input Gear
9.99 €
BULLET ST FLUX, RS4 PRO 3, RS4 SPORT 3, BULLET MT FLUX, WR8 3.0, BULLET MT, RS4 3 Evo, BULLET ST, HPI
SAVAGE XS/BULLET Genuine HPI quality spare part for easy maintenance and repairs. 
In stock
+ −
Add to wish list Add to comparison list
HPI, 103668 BRACE AND STIFFENER SET
19.99 €
VORZA, HPI
VORZA Genuine HPI quality spare part for easy maintenance and repairs.
In stock
+ −
Add to wish list Add to comparison list
XRAY, GRAPHITE SHOCK TOWER REAR 3.0MM - V3
34.99 €
XB4 - 2015, XB4 - 2014, XB4 - 2013, XB4 2WD- 2014, XRAY
CNC-machined rear shock tower made from 3.0mm thick premium-grade graphite material to guarantee incredible strength and long life. Rear shock tower...
In stock
+ −
Add to wish list Add to comparison list
XRAY, PUR® REINFORCED DRIVE BELT FRONT 5.0 x 186 MM - V2
19.99 €
NT1 - 2016, NT1 - 2009, NT1 - 2014, NT1 - 2007, NT1 - 2015, NT1 WE - 2010, NT1R - 2010, NT1 - 2013, NT1 PRO - 2012, NT1 - 2012, NT1 EC - 2009, NT1 - 2010, NT1 - 2017, NT1 - 2011, XRAY
PUR® reinforced front drive belt. 5.0 x 186mm. This belt is very thin and elastic as possible for an extremely efficient, low-friction drivetrain.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU 7075 HEX SCREW M3x8 FOR REAR WHEELS (6)
11.99 €
X10 GT - 2016, X10 GT - 2015, X10 LINK GT - 2010, X12 US - 2018, X12 - 2014, X12 EU - 2018, X12 - 2017, X12 - 2015, X12 - 2016, X12 - 2012, X10 GT - 2018, X10 GT - 2009, XRAY
Lightweight and strong alu M3x8 socket-head cap screw, hex drive. Set of 6.
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 GRAPHITE RADIO PLATE FOR LONG CHASSIS
8.40 €
XB808 - 2009, XB808 - 2010, XRAY
CNC-machined radio plate from premium high-grade graphite material ensures superior strength while remaining very light.  Designed for use with XB808...
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 LOWER INNER PIVOT PIN SCREW 4MM (2)
3.90 €
XB808 - 2010, XB9E - 2013, XB808 - 2008, XB9 - 2012, XB808 - 2009, XB9 - 2013, XB808 - 2011, XB808E - 2010, XRAY
Hardened 4mm lower inner pivot pins are mounted through the suspension holders and are locked with self-locking nuts. This suspension holder...
In stock
+ −
Add to wish list Add to comparison list
XRAY, FLYWHEEL COLLAR 7MM - NOVAROSSI
7.99 €
NT1 - 2014, NT1 - 2007, NT1 - 2013, NT1 WE - 2010, NT1 - 2012, NT1 PRO - 2012, NT1R - 2010, NT1 EC - 2009, NT1 - 2017, NT1 - 2011, NT1 - 2016, NT1 - 2010, NT1 - 2015, NT1 - 2009, XRAY
XCA clutch flywheel collar for Novarossi-based engines (7mm).
In stock
+ −
Add to wish list Add to comparison list
XRAY, FLYWHEEL NUT - HUDY SPRING STEEL™
14.99 €
NT1 - 2009, RX8 - 2014, NT1 - 2010, NT1 - 2007, RX8 - 2016, NT1 - 2011, NT1 PRO - 2012, RX8 - 2017, NT1 EC - 2009, NT1R - 2010, NT1 - 2015, NT1 - 2012, RX8 - 2011, NT1 - 2016, NT1 - 2013, RX8 - 2012, NT1 - 2017, NT1 - 2014, RX8 - 2013, NT1 WE - 2010, XRAY
CNC-machined flywheel nut for XCA clutch. Made from HUDY Spring Steel™.
In stock
+ −
Add to wish list Add to comparison list
HPI,85026 SHOCK SHAFT 3x34mm (PAIR - REAR/SPRINT)
8.00 €
SPRINT, HPI
SHOCK SHAFT 3x34mm (PAIR - REAR/SPRINT)
In stock
+ −
Add to wish list Add to comparison list
XRAY, BALL STEEL 2.4MM (24)
4.99 €
M18T, T1FK - 2004, M18, T1 - 2001, T1 EVO2 - 2002, M18 PRO, NT18T, M18 PRO LiPo, NT18MT, T1FK'05 - 2005, M18MT, NT18, T1R, T1 EVO2 - 2003, M18T PRO, T1 MINI, XRAY
Steel balls 2.4mm for ball differential. Set of 24 pieces is enough for two ball differentials (12 each).
In stock
+ −
Add to wish list Add to comparison list
XRAY, E-CLIP 1.9 (10)
6.90 €
T1FK'05 - 2005, X12 - 2015, T3 - US - 2010, T2'009 - EU - 2009, X10 GT - 2009, T1R, T2R - 2006, NT1 - 2009, X12 - 2014, T1 EVO2 - 2003, T2'007 - US - 2007, X1 - 2018, RX8 - 2011, T3 - EU - 2010, NT1 - 2010, X12 - 2012, T1 MINI, NT1 - 2012, T2'009 - US - 2009, X12 US - 2018, X1 - 2017, RX8 - 2012, T3 - 2012, NT1 - 2011, X10 LINK GT - 2010, T1FK - 2004, NT1 EC - 2009, T2'008 - US - 2008, X12 EU - 2018, X1 - 2016, T3 - 2011, X10 GT - 2018, T1 - 2001, NT1 PRO - 2012, T2'008 - EU - 2008, X12 - 2017, X1 - 2015, T2 - 2006, X10 GT - 2016, NT1 WE - 2010, T1 EVO2 - 2002, NT1 - 2007, X12 - 2016, T3R - 2010, T2'007 - EU - 2007, X10 GT - 2015, NT1R - 2010, T2R PRO - 2009, XRAY
1.9mm dia. E-clip. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, E-CLIP 5 (10)
6.99 €
T3 - US - 2010, T2'008 - US - 2008, RX8 - 2012, NT1 - 2010, T1FK - 2004, NT1 - 2016, T3R - 2010, T2'008 - EU - 2008, RX8 - 2011, NT1 - 2009, T1 MINI, NT1 - 2015, T4 - 2013, T2'007 - US - 2007, NT1R - 2010, T4 - 2015, NT1 - 2007, T2R PRO - 2009, RX8 - 2017, NT1 - 2014, T4 - 2014, T2'007 - EU - 2007, NT1 WE - 2010, T4 - 2016, T3 - 2011, T2R - 2006, RX8 - 2016, NT1 - 2013, T2 - 2006, NT1 PRO - 2012, T4 - 2017, T3 - 2012, T2'009 - US - 2009, RX8 - 2014, NT1 - 2012, T1R, T4 - 2018, NT1 EC - 2009, T3 - EU - 2010, T2'009 - EU - 2009, RX8 - 2013, NT1 - 2011, T1FK'05 - 2005, NT1 - 2017, XRAY
5mm dia. E-clip. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, T2 SHOCK CAP-NUT ALU (2)
1.90 €
T2'007 - US - 2007, T2'007 - EU - 2007, NT1 - 2007, T2 - 2006, T2R - 2006, XRAY
Alu. shock cap nuts for top pivot of XRAY T2 shock absorbers. Set of two.
In stock
+ −
Add to wish list Add to comparison list
XRAY, FRONT UNIVERSAL CENTRAL DRIVE SHAFT - HUDY SPRING STEEL™ - SET
39.90 €
XT8 - 2017, XB8E - 2017, XB8 - 2017, XB8E - 2016, XB8 - 2016, XRAY
Optional front universal central drive shaft, CNC-machined from world-renowned HUDY Spring Steel™. Ensures more free movement of the drivetrain and improves...
In stock
+ −
Add to wish list Add to comparison list
XRAY 930508 BALL-BEARING 5x8x2.5 (2)
9.99 €
NT18MT, XB4 - 2016, T2R - 2006, T1 EVO2 - 2002, XB2 Carpet - 2017, T2 - 2006, NT1 - 2017, XB4 - 2015, T2'009 - US - 2009, T1 - 2001, XB2 Carpet - 2016, T1R, NT1 - 2016, XB4 - 2014, T2'009 - EU - 2009, M18T PRO, RX8 - 2017, XT2 - 2017, T3R - 2010, T1FK'05 - 2005, NT1 - 2015, XB4 - 2013, T2'008 - US - 2008, M18T, RX8 - 2016, XB4 2WD- 2014, T3 - US - 2010, T1FK - 2004, XB2 Dirt - 2017, T2'008 - EU - 2008, M18MT, RX8 - 2014, XB4 - 2018, T3 - EU - 2010, T1 MINI, XB2 Dirt - 2016, T2'007 - US - 2007, NT18T, XB4 - 2017, T2R PRO - 2009, T1 EVO2 - 2003, XB2 Carpet - 2018, T2'007 - EU - 2007, XRAY
High-quality ball-bearings ID x OD x thickness (mm) = 5x8x2.5mm. Set of 2 pieces. These ball-bearings are degreased and lightly oiled with AeroShell...
In stock
+ −
Add to wish list Add to comparison list
XRAY, DIFF GASKET (4)
8.99 €
XB4 - 2015, T3 - 2011, T4 - 2014, XB4 - 2014, T4 - 2013, XB4 - 2013, XB4 2WD- 2014, T3R - 2010, T4 - 2018, XB4 - 2018, T3 - US - 2010, T4 - 2017, XB4 - 2017, T3 - EU - 2010, T4 - 2016, XB4 - 2016, T3 - 2012, T4 - 2015, XRAY
Sealing gasket for differential housing. Fits #304900 composite gear differential. Set of 4.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ECS DRIVE AXLE FOR 2MM PIN - HUDY SPRING STEEL™
24.99 €
T2'008 - EU - 2008, T4 - 2013, T3 - EU - 2010, T2'008 - US - 2008, T4 - 2017, T3 - 2012, T2'009 - EU - 2009, T4 - 2018, T3R - 2010, T3 - US - 2010, T2'009 - US - 2009, T3 - 2011, T4 - 2014, T2R - 2006, T2'007 - EU - 2007, T4 - 2015, T2R PRO - 2009, T2'007 - US - 2007, T4 - 2016, T2 - 2006, XRAY
CNC-machined drive axle for ECS drive shafts, made from world-renowned HUDY Spring Steel™. Fits #305330 and #305331 ECS drive shafts. The drive shaft axle...
In stock
+ −
Add to wish list Add to comparison list
XRAY, PIVOT BALL 6.8MM (2)
6.99 €
RX8 - 2017, RX8 - 2014, RX8 - 2016, RX8 - 2013, RX8 - 2012, RX8 - 2011, XRAY
Composite pivot balls for smoother suspension movement. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB9 ALU FRONT SHOCK BODY - HARD COATED (2)
6.40 €
XB9 - 2012, XB9 - 2013, XB9E - 2013, XRAY
CNC-machined alu front shock body for XB9, made from premium lightweight 7075 T6 aluminum. The big bore shock bodies are externally threaded with an...
In stock
+ −
Add to wish list Add to comparison list
XRAY, T4 ANTI-ROLL BAR REAR 1.2 MM
2.10 €
T4 - 2013, T4 - 2014, XRAY
The T4 rear anti-roll bars for narrowed bulkheads for super-fine tuning. For easy recognition the anti-roll bars have laser-engraved stripes (to indicate bar...
In stock
+ −
Add to wish list Add to comparison list
MAVERICK, Rear Suspension Arm Holder (ALL Strada and EVO)
7.99 €
STRADA EVO, MAVERICK
Genuine Maverick kit spare part for quick repairs, correct maintenance, and precise fitting.
In stock
+ −

Minimum quantity for "MAVERICK, Rear Suspension Arm Holder (ALL Strada and EVO)" is 4.

Add to wish list Add to comparison list
XRAY, COMPOSITE SLIPPER CLUTCH SPUR GEAR 81T / 48
9.99 €
XB4 2WD- 2014, XB4 - 2015, XB4 - 2014, XB4 - 2013, XRAY
Precision-molded spur gear 81T is made from XRAY's exclusive secret blend of composite material, allowing the gear to run yet be robust enough to handle...
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 ALU REAR SHOCK BODY - HARD COATED (2)
6.40 €
XB808 - 2008, XT8 - 2007, XB808E - 2010, XT8 - 2009, XB808 - 2011, XB808 - 2010, XB808 - 2009, XRAY
CNC-machined alu rear shock body for XB808, made from premium lightweight 7075 T6 aluminum. The shock bodies have 18.5mm outside diameter and are...
In stock
+ −
Add to wish list Add to comparison list
XRAY, SILICONE O-RING 24x0.7 (10)
12.99 €
T4 - 2014, NT1 - 2011, NT1 - 2017, T4 - 2013, NT1 - 2010, NT1 - 2016, T3 - 2012, NT1 - 2009, T4 - 2018, NT1 - 2015, NT1R - 2010, NT1 - 2007, T4 - 2017, NT1 - 2014, NT1 WE - 2010, T4 - 2016, NT1 - 2013, NT1 PRO - 2012, T4 - 2015, NT1 - 2012, NT1 EC - 2009, XRAY
Silicone O-ring fits over 24mm shaft. 0.7mm thick. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, FRONT DRIVE AXLE - HUDY SPRING STEEL™
9.99 €
XB2 Carpet - 2018, XB2 Carpet - 2017, XB2 Carpet - 2016, XB2 Dirt - 2016, XB2 Dirt - 2017, XRAY
Front wheel axle made from world-renowned HUDY Spring Steel™. Strategically machined for toughness and light weight without compromising strength. The wheel...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ANTI-ROLL BAR REAR 3.0 MM - SET
5.99 €
RX8 - 2013, RX8 - 2012, RX8 - 2011, XRAY
Tough steel rear anti-roll bar wire (3.0). Manually measured, selected, and straightened to eliminate all tweak. Laser engraved 3.0 for easy identification.
In stock
+ −
Add to wish list Add to comparison list
XRAY, SHOCK CAP-NUT ALU (2) --- Replaced with #308352
1.90 €
T1 EVO2 - 2002, T1R, T1FK - 2004, T1 MINI, T1 EVO2 - 2003, T1FK'05 - 2005, XRAY
Set of two alu. nuts to close up the top pivot point of XRAY shock absorbers.
In stock
+ −
Add to wish list Add to comparison list
XRAY 345858 COMPOSITE FRONT BELT PULLEY 18T o6 - CENTER
10.99 €
RX8 - 2016, RX8 - 2017, RX8 - 2012, RX8 - 2011, RX8 - 2013, RX8 - 2014, XRAY
Molded composite 18T front belt pulley on inside of middle shaft, drives front belt.
In stock
+ −
Add to wish list Add to comparison list
HPI, DUAL FIBERGLASS BRAKE DISK 19X35X2.5MM/ PLATE SET
19.99 €
SAVAGE X 4.6, HPI
Savage X 4.6 / Use with #86322 CUP JOINT 6x19x21mm Genuine HPI quality spare part for the Savage X 4.6 RTR, and a fantastic option part for other...
In stock
+ −
Add to wish list Add to comparison list
HPI, 85608 HEX HUB SET
13.99 €
E10 2014 FORD MUSTANG, E10, E10 Drift Nissan S13 Discount Tire, HPI
E10 Genuine HPI quality spare part for easy maintenance and repairs.
In stock
+ −
Add to wish list Add to comparison list
HPI, 6281 - SHAFT 3x36mm (2pcs)
5.99 €
SUPER NITRO RALLY, HPI
Genuine HPI quality spare part for easy maintenance and repairs.
In stock
+ −
Add to wish list Add to comparison list
XRAY, DIFF BULKHEAD BLOCK SET REAR - V2
13.00 €
XB4 2WD- 2014, XB4 - 2014, XB4 - 2013, XB4 - 2015, XRAY
Tough composite, rigid rear diff bulkhead block set to which all rear suspension parts are mounted. Unique bulkhead allows for quick and easy diff exchange...
In stock
+ −
Add to wish list Add to comparison list
XRAY, ECS (ES) DRIVE SHAFT 52MM FOR 2MM PIN - HUDY SPRING STEEL™ (1)
18.00 €
T4 - 2014, T2'007 - US - 2007, T2R PRO - 2009, T4 - 2013, T2'007 - EU - 2007, T2R - 2006, T3R - 2010, T2 - 2006, T4 - 2018, T2'009 - US - 2009, T3 - US - 2010, T4 - 2017, T2'009 - EU - 2009, T3 - EU - 2010, T4 - 2016, T2'008 - US - 2008, T3 - 2012, T4 - 2015, T2'008 - EU - 2008, T3 - 2011, XRAY
Super-lightweight 50mm alu drive shaft CNC-machined from premium Swiss 7075 T6 and hardcoated for extra durability and stylish looks. New design is...
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE STEERING BLOCK RIGHT
3.99 €
RX8 - 2011, XRAY
Molded composite RIGHT steering block. Marked “R” for easy identification. Front steering block features concentric and eccentric bushings which allow roll...
Out of stock
Out of stock Add to wish list Add to comparison list
XRAY, ALU REAR SHOCK BODY - HARD COATED (2)
6.40 €
XB9 - 2012, XT9 - 2013, XT8 - 2007, XB9E - 2013, XB9 - 2013, XT8 - 2009, XRAY
CNC-machined alu rear shock body for XB9, made from premium lightweight 7075 T6 aluminum. The big bore shock bodies are externally threaded with an...
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE STEERING BLOCK LEFT
3.99 €
RX8 - 2011, XRAY
Molded composite LEFT steering block for XRAY RX8. Marked “L” for easy identification. Front steering block features concentric and eccentric bushings which...
Out of stock
Out of stock Add to wish list Add to comparison list
XRAY, COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - V2
9.99 €
XB4 - 2013, XB4 - 2018, XB4 2WD- 2014, XB4 - 2016, XB4 - 2017, XB4 - 2015, XB4 - 2014, XRAY
Rear lower right suspension arm made from super-tough composite material that is exclusively used for suspension arms, a perfect balance between...
In stock
+ −
Add to wish list Add to comparison list
XRAY, FRONT MIDDLE SHAFT - LIGHTWEIGHT - HUDY SPRING STEEL™
9.90 €
RX8 - 2012, RX8 - 2011, RX8 - 2013, XRAY
For serious racers conscious of weight savings, XRAY’s new optional front middle shaft is CNC-machined from world-renowned HUDY Spring Steel™, and has been...
In stock
+ −
Add to wish list Add to comparison list
XRAY, BRAKE PAD "SLS" (2)
14.99 €
NT1 - 2014, NT1 - 2007, NT1 - 2013, NT1 WE - 2010, NT1 - 2012, NT1 PRO - 2012, NT1R - 2010, NT1 EC - 2009, NT1 - 2017, NT1 - 2011, NT1 - 2016, NT1 - 2010, NT1 - 2015, NT1 - 2009, XRAY
Ultra-efficient brake pads made from new SLS high-friction material for smoother, more consistent braking. Set of 4.
In stock
+ −
Add to wish list Add to comparison list
XRAY, FRONT SHOCK SHAFT (2)
3.30 €
XB8 - 2005, XB8-TQ - 2006, XB8R, XRAY
Front shock shaft made from 3.5mm diameter hardened steel. Polished for smooth operation. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY, SET OF COMPOSITE PIVOT BALLS M18T
4.90 €
M18MT, M18T, M18T PRO, XRAY
Complete set of composite pivot balls for M18T, includes also composite pivot balls for optional #382412 anti-roll bar front & rear 1.2mm.
In stock
+ −
Add to wish list Add to comparison list
XRAY, XB808 ALU CASTER BLOCK 16° RIGHT - SWISS 7075 T6 - HARD COATED
13.99 €
XB808 - 2009, XB9 - 2013, XB808 - 2008, XB9 - 2012, XB9E - 2013, XB808E - 2010, XB808 - 2010, XB808 - 2011, XRAY
Authentic XRAY right-side 16° alu caster block for XB808 is CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long...
In stock
+ −
Add to wish list Add to comparison list
XRAY, X1 COMPOSITE ARM BUSHING (4)
6.99 €
X12 US - 2018, X1 - 2018, X1 - 2017, X1 - 2016, X1 - 2015, XRAY
Composite arm bushing for pivot ball made from strong, lightweight, self-developed composite material. Set of 4.
In stock
+ −
Add to wish list Add to comparison list
XRAY, T4'17 GRAPHITE FLOATING SERVO HOLDER 3.0MM
8.70 €
T4 - 2017, T4 - 2018, XRAY
CNC-machined floating servo holder made from 3.0mm premium-grade graphite material. The all-new, unique floating servo holder is now standard in the...
In stock
+ −
Add to wish list Add to comparison list
XRAY, FRONT DIFF LARGE BEVEL GEAR 38T
13.90 €
XB8 - 2016, XB9E - 2013, XB8R, XB8 - 2015, XB8E - 2016, XB8 - 2014, XB8E - 2015, XB8 - 2005, XB8-TQ - 2006, XB9 - 2012, XB8-EC - 2007, XB9 - 2013, XRAY
The new 38T front diff crown gear for the XB8 is CNC-machined from hardened HUDY steel developed specially for gears, allowing for ultra-true,...
In stock
+ −
Add to wish list Add to comparison list
XRAY, Diff Bulkhead Block Set Front - V2
11.99 €
XB4 - 2014, XB4 - 2015, XB4 2WD- 2014, XRAY
Tough composite, rigid front diff bulkhead block set to which all front suspension parts are mounted. Unique bulkhead allows for quick and easy diff...
In stock
+ −
Add to wish list Add to comparison list
XRAY, GRAPHITE RADIO PLATE - V2
7.90 €
XT8 - 2009, XT8 - 2007, XB8R, XB8-TQ - 2006, XB8 - 2005, XRAY
CNC-machined graphite radio plate. All screw holes are countersunk.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ECS (ES) DRIVE SHAFT CASE FOR 2MM PIN - HUDY SPRING STEEL™
13.99 €
T4 - 2014, T2'007 - US - 2007, T2R PRO - 2009, T4 - 2013, T2'007 - EU - 2007, T2R - 2006, T3R - 2010, T2 - 2006, T4 - 2018, T2'009 - US - 2009, T3 - US - 2010, T4 - 2017, T2'009 - EU - 2009, T3 - EU - 2010, T4 - 2016, T2'008 - US - 2008, T3 - 2012, T4 - 2015, T2'008 - EU - 2008, T3 - 2011, XRAY
ECS Drive Shaft Case made from HUDY Spring Steel™ fits ECS (ES) drive shafts #305223 and #305224. The drive shaft case is updated for the stronger 2mm pin,...
In stock
+ −
Add to wish list Add to comparison list
XRAY, BRASS CHASSIS WEIGHT FRONT 60G
9.90 €
XB9 - 2012, XB9 - 2013, XB9E - 2013, XRAY
Optional brass chassis weight mounts to predrilled holes at front of XB9 chassis, to adjust the balance of the car.
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE UPRIGHT REAR - V2
6.00 €
XB4 - 2014, XB4 - 2013, XB4 - 2015, XB4 2WD- 2014, XRAY
Molded composite rear upright with 2 roll center positions, used on left or right side. The very compact rear uprights are small in size but...
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE TUBING HOLDER FOR FUEL TANK (2)
9.99 €
XB808 - 2009, XB808 - 2010, XB8 - 2017, XB808 - 2011, XB8 - 2016, XB9 - 2012, GTX - 2017, XB9 - 2013, XB8 - 2014, XB8 - 2015, XRAY
Molded composite fuel tubing holders for fuel tank are attached to the tank by screws. These holders prevent the fuel tubes from moving around during racing...
In stock
+ −
Add to wish list Add to comparison list
XRAY, FRONT SHOCK SHAFT (2)
19.99 €
XB9 - 2013, XB8 - 2017, XB8 - 2014, XB8E - 2015, XB8 - 2015, XB8E - 2016, XB8 - 2016, XB8E - 2017, XB9E - 2013, XB9 - 2012, XRAY
Front shock shaft made from 3.5mm diameter hardened steel. Polished for smooth operation. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY, ALU PROGRESSIVE SHOCK SYSTEM - SET (2)
33.99 €
T4 - 2013, T4 - 2018, T4 - 2016, T4 - 2014, T4 - 2015, T4 - 2017, XRAY
Innovative progressive shock system for touring cars for improved traction and steering characteristics. Shock insert has 3 triangle cuts and is...
In stock
+ −
Add to wish list Add to comparison list
XRAY 345024 COMPOSITE FRONT ONE-WAY AXLE PULLEY 24T
9.99 €
RX8 - 2011, RX8 - 2017, RX8 - 2013, RX8 - 2012, RX8 - 2016, RX8 - 2014, XRAY
Molded composite 24T pulley for front one-way. Special lightened pulley with "side click-cover."
In stock
+ −
Add to wish list Add to comparison list
XRAY, REAR UNIVERSAL CENTRAL DRIVE SHAFT - HUDY SPRING STEEL™ - SET
39.90 €
XB8E - 2016, XB8 - 2017, XB8 - 2016, XB8E - 2017, XRAY
Optional rear universal central drive shaft, CNC-machined from world-renowned HUDY Spring Steel™. Ensures more free movement of the drivetrain and improves...
In stock
+ −
Add to wish list Add to comparison list
XRAY, XCA CLUTCHBELL - HIGH DYNAMIC - HUDY STEEL
34.90 €
NT1 - 2012, NT1 - 2016, NT1 - 2013, NT1 - 2015, NT1 - 2007, NT1 EC - 2009, NT1R - 2010, NT1 PRO - 2012, NT1 - 2009, NT1 WE - 2010, NT1 - 2010, NT1 - 2014, NT1 - 2011, NT1 - 2017, XRAY
High-dynamic clutchbell for the High-dynamic XCA Clutch Set features a smaller design. Made from ultra-strong HUDY Steel, the clutchbell has been...
In stock
+ −
Add to wish list Add to comparison list
XRAY, FRONT DRIVE AXLE - HUDY SPRING STEEL™ - 2WD
4.90 €
XB4 2WD- 2014, XRAY
Front wheel axle made from world-renowned HUDY Spring Steel™. Strategically machined for toughness and light weight without compromising strength. The wheel...
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE SUSPENSION ARM - FRONT LOWER - LEFT
5.90 €
X10 LINK GT - 2010, X10 GT - 2009, X12 - 2012, XRAY
Molded composite LEFT front lower suspension arm for XRAY XII. Marked “L” for easy identification. Use with matching left front lower suspension arm 372110.
In stock
+ −
Add to wish list Add to comparison list
XRAY, E-CLIP 1.5 (10)
4.90 €
X12 - 2015, NT18MT, X10 GT - 2009, X12 - 2014, M18T PRO, X1 - 2018, X12 - 2012, M18T, X12 US - 2018, X1 - 2017, X10 LINK GT - 2010, M18MT, X12 EU - 2018, X1 - 2016, X10 GT - 2018, X12 - 2017, X1 - 2015, X10 GT - 2016, X12 - 2016, NT18T, X10 GT - 2015, XRAY
1.5mm dia. E-clip. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, GRAPHITE GEAR DIFF BEVEL & SATELLITE GEARS (2+4) - LOW
30.99 €
NT1 - 2009, NT1 WE - 2010, XB2 Carpet - 2016, XB4 - 2017, T4 - 2013, XB2 Dirt - 2016, NT1 - 2007, NT1R - 2010, XB2 Carpet - 2017, XB4 - 2018, T4 - 2014, XB2 Dirt - 2017, T3 - 2011, XB2 Carpet - 2018, XB4 2WD- 2014, NT1 - 2016, T4 - 2015, XB4 - 2013, T3 - 2012, NT1 - 2011, XT2 - 2017, NT1 - 2017, T4 - 2016, XB4 - 2015, T3 - EU - 2010, NT1 - 2012, NT1 - 2015, NT1 EC - 2009, T4 - 2017, NT1 - 2014, T3 - US - 2010, NT1 - 2013, NT1 - 2010, NT1 PRO - 2012, T4 - 2018, XB4 - 2016, T3R - 2010, XB4 - 2014, XRAY
Gear differential internal gears precision made from new graphite composite mixture. Includes 2 bevel gears + 4 satellite gears. Molded from an all-new...
In stock
+ −
Add to wish list Add to comparison list
HPI, 88000 DIFF GEAR SET 15/38T
9.99 €
E10, HPI
E10 Genuine HPI quality spare part for easy maintenance and repairs.
In stock
+ −
Add to wish list Add to comparison list
XRAY, HIGH-SPEED BALL-BEARING 6x13x5 RUBBER SEALED (2)
8.99 €
XB2 Carpet - 2017, NT1 PRO - 2012, NT1 - 2012, NT1 - 2009, XB2 Carpet - 2016, NT1R - 2010, NT1 - 2010, NT1 - 2013, RX8 - 2017, RX8 - 2011, XT2 - 2017, NT1 - 2011, RX8 - 2016, NT1 WE - 2010, XB2 Dirt - 2017, NT1 - 2014, RX8 - 2014, NT1 EC - 2009, XB2 Dirt - 2016, NT1 - 2015, RX8 - 2013, NT1 - 2017, XB2 Carpet - 2018, NT1 - 2016, RX8 - 2012, NT1 - 2007, XRAY
New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 6x13x5. Set of 2 pieces.   Top-quality professional...
In stock
+ −
Add to wish list Add to comparison list
XRAY, FLYWHEEL COLLAR 6MM - PICCO
11.99 €
NT1 - 2014, NT1 - 2007, NT1 - 2013, NT1 WE - 2010, NT1 - 2012, NT1 PRO - 2012, NT1R - 2010, NT1 EC - 2009, NT1 - 2017, NT1 - 2011, NT1 - 2016, NT1 - 2010, NT1 - 2015, NT1 - 2009, XRAY
XCA clutch flywheel collar for Picco-based engines (6mm).
In stock
+ −
Add to wish list Add to comparison list
HPI, 101227 Flange Pipe (4pcs)
9.99 €
WR8, BULLET MT, WR8 FLUX, BULLET ST, BULLET ST FLUX, BULLET MT FLUX, WR8 3.0, HPI
WR8 Genuine HPI quality spare part for easy maintenance and repairs.  
In stock
+ −
Add to wish list Add to comparison list
XRAY, OFFSET SPUR GEAR 114T / 64
9.99 €
T3 - 2012, T1FK - 2004, T2'008 - US - 2008, T4 - 2016, T3 - 2011, T1 MINI, T2'007 - US - 2007, T4 - 2017, T2R PRO - 2009, T1 EVO2 - 2003, T4 - 2013, T2'007 - EU - 2007, T4 - 2018, T2R - 2006, T1 EVO2 - 2002, T3R - 2010, T2 - 2006, T2'009 - US - 2009, T1 - 2001, T3 - US - 2010, T1R, T2'009 - EU - 2009, T4 - 2014, T3 - EU - 2010, T1FK'05 - 2005, T2'008 - EU - 2008, T4 - 2015, XRAY
XRAY precision molded offset spur gear 114 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass.
In stock
+ −
Add to wish list Add to comparison list
XRAY, FRONT LOWER INNER PIVOT PIN (2)
4.90 €
RX8 - 2012, RX8 - 2011, RX8 - 2013, XRAY
Front lower inner pivot pins. Hardened for ultra-high durability and long life. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
XRAY, HEX SCREW FLANGED SH M4x10 (10)
7.99 €
XB9E - 2013, XB8 - 2017, XB808 - 2009, GTX - 2017, XB9 - 2013, XB8 - 2005, RX8 - 2017, RX8 - 2016, XB9 - 2012, XB8 - 2015, XT9 - 2013, RX8 - 2014, XB8R, XB808 - 2008, XT8 - 2017, RX8 - 2013, XB8E - 2015, XB8-TQ - 2006, XT8 - 2009, RX8 - 2012, XB808 - 2011, XB8-EC - 2007, XT8 - 2007, XB8 - 2014, XB808 - 2010, XB8 - 2016, XRAY
M4x10 flanged button-head machine screw, hex drive. Set of 10 pieces.
In stock
+ −
Add to wish list Add to comparison list
XRAY, REAR SOLID AXLE SHAFT - LIGHTWEIGHT - HUDY SPRING STEEL™
11.99 €
RX8 - 2013, RX8 - 2012, RX8 - 2011, RX8 - 2014, XRAY
CNC-machined lightweight rear solid axle shaft. Axle body is manufactured from HUDY Spring Steel™ and has been strategically machined 25% lighter than...
In stock
+ −
Add to wish list Add to comparison list
XRAY, T3 SHOCK TOWER REAR 3.0MM GRAPHITE
8.30 €
T3 - EU - 2010, T3 - 2011, T3 - US - 2010, T3R - 2010, XRAY
CNC-machined super-low rear shock tower made from 3.0mm thick premium graphite material to guarantee maximum strength and long life. Low height...
In stock
+ −
Add to wish list Add to comparison list
XRAY, T3 RUBBER-SPEC UPPER DECK 2.0MM GRAPHITE
22.99 €
T3 - EU - 2010, T3 - US - 2010, T3R - 2010, XRAY
CNC-machined upper deck of premium-grade 2.0mm thick graphite material, specially designed and optimized for rubber-tire racing conditions. This...
In stock
+ −
Add to wish list Add to comparison list
XRAY, REAR LOWER OUTER PIVOT PIN SCREW 3MM (2)
12.99 €
XB808 - 2010, XB8E - 2016, XB808 - 2008, XB8E - 2017, XB808 - 2009, XB808 - 2011, XB9 - 2012, XB8 - 2016, XB8 - 2015, XB9 - 2013, XB8 - 2017, XB8 - 2014, XB9E - 2013, XB808E - 2010, GTX - 2017, XB8E - 2015, XRAY
Hardened 3mm rear lower outer hinge pins are mounted through the rear uprights and locked with self-locking nuts. This concept ensures that...
In stock
+ −
Add to wish list Add to comparison list
XRAY, COMPOSITE CENTER DIFF SPUR GEAR 81T / 48
8.99 €
XB4 - 2016, XB4 - 2015, XB4 - 2017, XB4 - 2018, XRAY
81-tooth large external spur gear for center differential. Molded from specially-formulated tough composite material. Tooth number stamped for easy...
In stock
+ −
Add to wish list Add to comparison list
1 - 8  Prev
2 3 4 5 6 7 8 9 10
Next