Product filters Product filters

ELECTRIC POWER

3.99 
LRP
This charging lead has 4mm gold connectors on both ends for versatile usability. It is made from high-flex 14AWG cable.
In stock
+

4.99 
LRP
With the new LRP adapters you can easy and fast connect your balancing connectors to either your charger or speed control without any soldering at all!...
In stock
+

4.99 
LRP
• for all batteries with Futaba RX/TX plug  • high quality 4mm gold connectors   • high-flex 20AWG cable • e. g. ideally suited for the LRP...
In stock
+


5.00 
LRP
• for all batteries with Sanwa / Graupner / JR – RX/TX plug  • high quality 4mm gold connectors   • high-flex 20AWG cable   • e. g....
In stock
+

5.99 
LRP
WorksTeam 3.3mm /12awg Powerwire black (1.0m) LRP Powercables 1 meter Low resistance 3.3mm²/12awg LRP powercables 1m
In stock
+


6.99 
LRP
With the new LRP adapters you can easy and fast connect your balancing connectors to either your charger or speed control without any soldering at all!...
In stock
+

6.99 
LRP
The 150mm sensor cable now also in an extra flat version. Ideal for clean builds and for laying under the ESC.
In stock
+

6.99 
LRP
In stock
+


6.99 
LRP
In stock
+


6.99 
LRP
In stock
+

9.99 
LRP
LRP UNIVERSAL CHARGING LEAD - US-STYLE PLUG • For all batteries with US-style connector • High-quality 4mm gold connectors • High-flex 14AWG cable...
In stock
+

9.99 
LRP
• length 50cm  • for all batteries with Tamiya / JST plug
In stock
+

9.99 
LRP
The high-flex sensor wires makes installation and usage in any R/C model smoother and more easy than ever before. Offered in 4 different lengths for...
In stock
+

9.99 
LRP
This smart BEC Stabilising Capacitor stabilises the voltage for your receiver and is especially important when running in racing classes that runs on a low...
Out of stock

9.99 
LRP
The high-flex sensor wires makes installation and usage in any R/C model smoother and more easy than ever before. Offered in 4 different lengths for...
In stock
+

9.99 
LRP
The high-performance cooling fan increases the speed control’s efficiency significantly.
In stock
+

9.99 
LRP, 7.2V, NIMH, 800
In stock
+

9.99 
LRP
Due to not standardized Hall sensor signals there are some motors which may not operate properly with the Flow X. This is because the Hall sensors of these...
In stock
+

9.99 
LRP
The 40 mm WorksTeam SuperHighRev. motor fan is part of the all new 1/8E Motor Cooling System. This system was successfully used at the 2023 EFRA 1/8...
In stock
+


11.99 
LRP
With the new LRP adapters you can easy and fast connect your balancing connectors to either your charger or speed control without any soldering at all!...
In stock
+

11.99 
LRP
LRP Hall Sensor Level Converter - 100mm Due to not standardized Hall sensor signals there are some non-LRP motors which may not operate properly...
In stock
+


11.99 
LRP
In stock
+

12.99 
LRP
The duo charging cable is ideal for use due to its total length of 60cm and is equipped with high-quality 4mm/5mm gold contact plugs. The highly flexible...
In stock
+

12.99 
LRP
The 40 mm WorksTeam SuperHighRev. motor fan is part of the all new 1/8E Motor Cooling System. This system was successfully used at the 2023 EFRA 1/8...
In stock
+

14.99 
LRP
LRP LIPO SAFE BOX - SMALL 15X6X5 CM The LRP LiPo Storage Boxes are made of several layers of fibreglass material. These LiPo Storage Boxes are...
In stock
+

14.99 
LRP
The double-charging lead is perfectly suited for its application due to the length of 60cm and is equipped with high-end 4mm/5mm gold connectors. The...
In stock
+

14.99 
LRP
The 4mm Gold Works Team connectors feature especially flat soldering posts and lowest internal resistance. Therefore, they are extremely conductive. The...
In stock
+

14.99 
LRP
MULTI BALANCER ADAPTER EHR/XH TO XH (2S-6S) With our Balancer Board and the extra long EHR/XH and XH/XH connection cables, 2S - 6S batteries can be...
In stock
+

14.99 
LRP
In stock
+

14.99 
LRP
Black burnished brass material for higher specific weight combined with great looks for perfect chassis balance with light batteries. Attached to the...
Out of stock

17.99  14.99 
LRP
In stock
+

17.99  14.99 
LRP
In stock
+


24.99  16.99 
1/10, LRP, BRUSHLESS
The newly designed X22 brass endcover is a perfect match and a great tuning upgrade for your X22 motor. The brass endcover gives the same advantage as the...
In stock
+

17.99 
LRP
Black burnished brass material for higher specific weight combined with great looks for perfect chassis balance with light batteries. Attached to the...
In stock
+

17.99 
LRP
Black burnished brass material for higher specific weight combined with great looks for perfect chassis balance with light batteries. Attached to the...
Out of stock

27.00  19.99 
LRP, 7.4V, LIPO, 2200
In stock
+

19.99 
LRP
Black burnished brass material for higher specific weight combined with great looks for perfect chassis balance with light batteries. Attached to the...
In stock
+

19.99 
LRP
Black burnished brass material for higher specific weight combined with great looks for perfect chassis balance with light batteries. Attached to the...
In stock
+

19.99 
LRP, BRUSHLESS
FEATURES LRP's own shaft preparation for ultra consistent performance Selected magnet material for highest temperture stability with...
In stock
+

19.99 
LRP, BRUSHLESS
FEATURES LRP's own shaft preparation for ultra consistent performance Selected magnet material for highest temperture stability with...
In stock
+

25.99  19.99 
LRP
The WorksTeam aluminium safety mesh is part of the all new 1/8E Motor Cooling System. This system was successfully used at the 2023 EFRA 1/8 E-buggy...
In stock
+