210 8089888

Product filters Product filters

MANUFACTURER
PRICE

€  –  €

  • ‎1€
  • ‎119.99€
Reset

SPARES & OPTIONALS

All about spare parts and optional parts/tune-ups for RC car kits

Sort Alphabetically: A to Z
96 Per Page
13T PINION GEAR (0.8 MODULE) (ALL STRADA EVO )
9.99 €
EVO, STRADA, MAVERICK, 0.8, 13
Use Maverick 0.8 Module pinion gears to change how fast your Strada Evo or Evo S kit will go! With a smaller number of teeth on the pinion, you will see...
In stock
+ −
Add to wish list Add to comparison list
14T Clutch Bell
15.00 €
BULLET ST, BULLET MT, TROPHY BUGGY 3.5, TROPHY TRAGGY 4.6, HPI
Get faster top speeds with a larger clutch bell installed! Easy to add and fun to behold!
In stock
+ −
Add to wish list Add to comparison list
150019 - FRONT LOWER HINGE PIN (2PCS)
5.99 €
In stock
+ −
Add to wish list Add to comparison list
150031 - FRONT LOWER SUSPENSION ARM (2PCS)
14.99 €
In stock
+ −
Add to wish list Add to comparison list
150035 - REAR UPPER LINKAGE (2PCS)
9.99 €
In stock
+ −
Add to wish list Add to comparison list
150110 - Chassis Skid Plate Set
9.99 €
In stock
+ −
Add to wish list Add to comparison list
150121 - Rear suspension Block
9.99 €
In stock
+ −
Add to wish list Add to comparison list
150133 - Servo Saver Post Set
12.99 €
In stock
+ −
Add to wish list Add to comparison list
150134 - Servo Saver Spring
4.99 €
In stock
+ −
Add to wish list Add to comparison list
150140 - Centre Drive Shaft 187mm
14.99 €
In stock
+ −
Add to wish list Add to comparison list
150153 - Shock Shaft Set (2pcs)
5.99 €
In stock
+ −
Add to wish list Add to comparison list
150157 - Rear Chassis Mount & Cover Set
9.99 €
In stock
+ −
Add to wish list Add to comparison list
150223 - Receiver Box Set
9.99 €
In stock
+ −
Add to wish list Add to comparison list
150255 - Spur Gear 49T (1M)
9.99 €
In stock
+ −
Add to wish list Add to comparison list
15T PINION GEAR (0.8 MODULE) (ALL STRADA EVO )
7.99 €
EVO, STRADA, MAVERICK, 0.8, 15
In stock
+ −
Add to wish list Add to comparison list
17T Pinion Gear (0.8 Module) (ALL Strada EVO )
9.99 €
STRADA EVO, MAVERICK, 0.8, 17
Use Maverick 0.8 Module pinion gears to change how fast your Strada Evo or Evo S kit will go! With a smaller number of teeth on the pinion, you will see...
In stock
+ −
Add to wish list Add to comparison list
1ST SPUR GEAR 58T
14.99 €
R10, NT1 - 2015, NT1 - 2014, NT1 - 2010, NT1 - 2013, NT1 - 2007, NT1 - 2012, NT1 - 2018, NT1 - 2011, NT1 - 2017, NT1 - 2009, NT1 - 2016, HPI
1ST SPUR GEAR 58T
In stock
+ −
Add to wish list Add to comparison list
80T 2,3,4 PLATE SLIPPER SPUR GEAR
7.99 €
In stock
+ −
Add to wish list Add to comparison list
ABC 20T 64P PINION
4.90 €
ABC, 64, 20
ABC 20T 64P PINION
In stock
+ −
Add to wish list Add to comparison list
ABC 21T 64P PINION
4.90 €
ABC, 64, 21
ABC 21T 64P PINION
In stock
+ −
Add to wish list Add to comparison list
ABC 22T 64P PINION
4.90 €
ABC, 64, 22
ABC 22T 64P PINION
In stock
+ −
Add to wish list Add to comparison list
ABC 23T 64P PINION
4.90 €
ABC, 64, 23
ABC 23T 64P PINION
In stock
+ −
Add to wish list Add to comparison list
ABC 24T 64P PINION
4.90 €
ABC, 64, 24
ABC 24T 64P PINION
In stock
+ −
Add to wish list Add to comparison list
ADAPTER 2-SPEED
10.99 €
NT1 - 2016, NT1 - 2009, NT1 - 2010, NT1 - 2017, NT1 - 2007, NT1 - 2011, NT1R - 2010, NT1 - 2012, NT1 EC - 2009, NT1 - 2013, NT1 PRO - 2012, NT1 - 2014, NT1 WE - 2010, NT1 - 2015, XRAY
CNC-machined 2-speed shoe adaptor made from high-tensile steel.
In stock
+ −
Add to wish list Add to comparison list
ADJ. TURNBUCKLE M4 L/R 45 MM - HUDY SPRING STEEL (2)
10.90 €
XB9 - 2013, XB808 - 2011, XB808 - 2009, XB8-2018, XB808 - 2008, XB9E - 2013, XB8-2019, XB9 - 2012, XB808E - 2010, XB808 - 2010, XRAY
Adjustable left & right M4 turnbuckles manufactured from special HUDY Spring Steel™ material for turnbuckles, resulting in stronger turnbuckles with a...
In stock
+ −
Add to wish list Add to comparison list
ADJ. TURNBUCKLE M5 L/R 50 MM - SPRING STEEL (2)
12.00 €
XB8 - 2016, XB8 - 2017, XB8-2019, XB8-2018, XB8E - 2016, XB8E - 2017, XRAY
Adjustable M5 turnbuckle made from a special blend of HUDY Spring Steel™ which is specifically formulated for turnbuckles. The turnbuckles have a tougher...
In stock
+ −
Add to wish list Add to comparison list
AIR FILTER FOAM & OIL - LOW PROFILE
11.99 €
XB8 - 2016, XT8 - 2007, XB808 - 2009, XB9 - 2013, XT8 - 2017, XB8 - 2017, XB808 - 2010, XT9 - 2013, XB8-2018, GTX - 2017, XB808 - 2011, XB8-2019, XB8 - 2005, XB8R, XB8-EC - 2007, XB8 - 2014, XB9 - 2012, XB8-TQ - 2006, XB8 - 2015, XT8 - 2009, XB808 - 2008, XRAY
Inner + outer low-profile foam filter elements, and a tube of air filter oil.
In stock
+ −
Add to wish list Add to comparison list
ALU ADJUSTING NUT M15x1 (2)
7.50 €
XB8 - 2017, XB8E - 2015, XB8 - 2016, XB8 - 2015, XB8 - 2014, GTX - 2017, XB8E - 2017, XB8E - 2016, XRAY
In stock
+ −
Add to wish list Add to comparison list
ALU CLUTCH SHOE - HARD (3)
33.99 €
XT9 - 2013, XB8 - 2016, XT8 - 2017, XB8R, XB8 - 2017, XB9 - 2013, XB808 - 2010, XB8-EC - 2007, GTX - 2017, XB808 - 2011, XB8-TQ - 2006, XB8 - 2005, XT8 - 2007, XB808 - 2008, XB8 - 2014, XT8 - 2009, XB808 - 2009, XB8 - 2015, XB9 - 2012, XRAY
Aluminum clutch shoes. Harder material allows for faster clutch engagement and higher corner speed. Set of 3.
In stock
+ −
Add to wish list Add to comparison list
Alu Drive Flange with One-Way Bearing - Swiss 7075 T6
41.99 €
GTX8, GTX - 2017, RX8, XRAY
1st gear drive flange CNC-machined from tough Swiss 7075 T6 alu. Includes factory-pressed (non-replaceable) high-quality German one-way bearing, hand-ground...
In stock
+ −
Add to wish list Add to comparison list
ALU ENGINE MOUNT - CNC MACHINED (L+R)
34.90 €
XB8 - 2016, XT8 - 2017, GTX - 2017, XB8 - 2017, XB8-2019, XB8-2018, XRAY
CNC-machined aluminum engine mounts, with redesigned mounting positions to improve chassis flex. The engine mounts extend up to the front engine...
In stock
+ −
Add to wish list Add to comparison list
ALU LIGHTWEIGHT LOCATING COLLAR (2)
13.90 €
NT1 - 2013, NT1 PRO - 2012, NT1 - 2007, NT1 - 2014, NT1 - 2016, NT1 - 2015, NT1 - 2009, NT1 WE - 2010, NT1 - 2010, NT1 EC - 2009, NT1 - 2011, NT1R - 2010, NT1 - 2012, XRAY
Strategically-lightened alu locating collar made from tough 7076 T6 alu replaces the composite collar used on the front middle shaft or 2-speed shaft....
In stock
+ −
Add to wish list Add to comparison list
ALU SHIM 3x6x4.0MM - BLACK (10)
12.99 €
T2 - 2006, T4 - 2013, T4 - 2016, T2R PRO - 2009, X1 - 2015, T2'007 - US - 2007, T4 - 2014, T3 - 2011, X1 - 2017, T2'008 - EU - 2008, T4 - 2015, T3 - 2012, X1 - 2018, T2'008 - US - 2008, T2'007 - EU - 2007, T3 - EU - 2010, X1 - 2016, T2'009 - EU - 2009, XT8 - 2017, T3 - US - 2010, T4 - 2018, T2'009 - US - 2009, XB4 2WD- 2014, T3R - 2010, T4 - 2017, T2R - 2006, XRAY
Alu shims 3x6mm size, 4mm thick. Black color, set of 10.
In stock
+ −
Add to wish list Add to comparison list
ALU SHIM 6x13x1 (2)
4.90 €
XB8 - 2014, XB8E - 2017, XB8 - 2015, XB8-2018, XB8 - 2016, XB8-2019, XB8 - 2017, XB8E - 2016, GTX - 2017, XB8E - 2015, XRAY
Alu shim. ID x OD x thickness = 6 x 13 x 1.0mm. Set of 2. Fits XB8.
In stock
+ −
Add to wish list Add to comparison list
Aluminium Rear Shock Set - S10 Twister BX
19.99 €
TWISTER S10, LRP
In stock
+ −
Add to wish list Add to comparison list
AM-NT1-338521 2nd. GEAR 21T (7075 HARD)
12.90 €
NT1 - 2018, NT1 - 2014, NT1 - 2007, NT1 - 2013, NT1 - 2017, NT1 - 2012, NT1 - 2016, NT1 - 2011, NT1 - 2015, NT1 - 2010, NT1 - 2009, ARROWMAX
Arrowmax released a new range of clutch pinion gears for the Xray NT1. Made from the highest quality 7075-T6 aluminium and then hard coated, they are...
In stock
+ −
Add to wish list Add to comparison list
ANTI-ROLL BAR FOR BALL-BEARINGS - REAR 1.2 MM
9.99 €
T4 - 2018, T4 - 2017, T4 - 2015, T4 - 2016, XRAY, T4
In stock
+ −
Add to wish list Add to comparison list
Anti-Roll Bar Front Female - HUDY Spring Steel™
14.90 €
RX8, XRAY
Female front anti-roll bar CNC-machined from world-renowned HUDY Spring Steel™ for long lifespan. For use with #342450 male front anti-roll bar. The...
In stock
+ −
Add to wish list Add to comparison list
Anti-Roll Bar Front Male - HUDY Spring Steel™
14.90 €
RX8, XRAY
Male front anti-roll bar CNC-machined from world-renowned HUDY Spring Steel™ for long lifespan. For use with #342440 female front anti-roll bar. The...
In stock
+ −
Add to wish list Add to comparison list
ARROWMAX AM-364116 SPUR GEAR 64P 116T
7.99 €
In stock
+ −
Add to wish list Add to comparison list
BALL BEARING 6x13x5 STEEL SEALED-OIL
5.99 €
BALL BEARING 6x13x5 STEEL SEALED-OIL
In stock
+ −
Add to wish list Add to comparison list
BALL BEARING FRONT - ZZ.12X TEAM SPEC.2
23.90 €
LRP
In stock
+ −
Add to wish list Add to comparison list
BALL BEARING REAR - ZZ.12X TEAM SPEC.2
31.20 €
LRP
In stock
+ −
Add to wish list Add to comparison list
BALL DIFF MAINTENANCE SET (MICRO RS4)
11.90 €
MICRO RS4 , HPI
BALL DIFF MAINTENANCE SET (MICRO RS4)
In stock
+ −
Add to wish list Add to comparison list
BALL END 4.9MM WITH THREAD 8MM (2)
12.99 €
X1 - 2017, XB2 Carpet - 2018, T4 - 2014, XB4 - 2016, X1 - 2016, XT2 - 2017, XB2 Carpet - 2017, NT1 - 2017, XB4 - 2015, X1 - 2015, XB8 - 2017, XB2 Carpet - 2016, NT1 - 2016, XB4 - 2014, T4 - 2018, XB8 - 2016, X12 US - 2018, NT1 - 2015, XB4 - 2013, T4 - 2017, XB4 2WD- 2014, X12 EU - 2018, GTX - 2017, XB2 Dirt - 2017, T4 - 2016, XB4 - 2018, X1 - 2018, XB2 Dirt - 2016, T4 - 2015, XB4 - 2017, XRAY
Threaded 4.9mm ball end with 8mm thread length for connection to molded ball joints. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
BALL END LONG 10mm(4pcs)-S10 TWISTER
9.99 €
TWISTER S10, LRP
BALL END LONG 10mm(4pcs)-S10 TWISTER
In stock
+ −
Add to wish list Add to comparison list
BALL STUD 6.8MM WITH BACKSTOP L=6MM - M3x8 (2)
12.90 €
XT8 - 2017, XB808E - 2010, GTX - 2017, XB9E - 2013, XB8E - 2015, XB8 - 2014, XB8-2019, XB8E - 2016, XB8 - 2015, XB808 - 2008, XB8E - 2017, XB8 - 2016, XB808 - 2009, XB9 - 2012, XB8 - 2017, XB808 - 2010, XB9 - 2013, XB808 - 2011, XB8-2018, XRAY
Ball stud 6.8mm with backstop, made from steel. Additionally heat treated for maximum strength, reliability, and long life. Features M3x8 thread. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
BALL-BEARING 3x8x4 (2)
4.99 €
XT2 - 2017, XB2 Dirt - 2017, XB2 Carpet - 2016, XB2 Carpet - 2017, XB2 Carpet - 2018, XB2 Dirt - 2016, XRAY
High-quality ball-bearings, 3x8x4mm. Set of 2. These ball-bearings are degreased and lightly oiled with AeroShell™ Fluid 12 oil for maximum smoothness,...
In stock
+ −
Add to wish list Add to comparison list
BALL-BEARING 8x12x3.5 FLANGED (2)
7.99 €
RX8 - 2014, RX8 - 2016, RX8 - 2017, XRAY
In stock
+ −
Add to wish list Add to comparison list
BELT 3M 366 (122T) 3mm (MICRO RS4 WB150mm)
14.90 €
MICRO RS4 , HPI
MICRO RS4 Replacement Belt for Micro RS4 with 150mm wheel base body shell. Can be used to convert your WB140mm Micro RS4 to fit WB150mm body...
In stock
+ −
Add to wish list Add to comparison list
BIG BORE SHOCK SPRING (BLUE/76MM/63GF/2PCS)
7.50 €
In stock
+ −
Add to wish list Add to comparison list
BIG BORE SHOCK SPRING (GRAY/76MM/52GF/2PCS)
8.90 €
In stock
+ −
Add to wish list Add to comparison list
BRAKE CAM POST & ROD (2+2)
13.90 €
XB8 - 2005, XT8 - 2009, XB8-EC - 2007, XB8-TQ - 2006, XB8R, XT8 - 2007, XT9 - 2013, XT8 - 2017, XRAY
NC-machined brake cam set, includes wire actuating rods. Set of 2 cam posts and 2 wire rods.
In stock
+ −
Add to wish list Add to comparison list
BRAKE PAD "SLS" (4)
32.90 €
XB808 - 2008, XB8R, GTX - 2017, XB808 - 2009, XT8 - 2007, XB9 - 2012, XB8 - 2005, XB808 - 2010, XT8 - 2009, XB9 - 2013, XB8 - 2014, XT8 - 2017, XB8-2019, XB8 - 2015, XT9 - 2013, XB8-EC - 2007, XB8 - 2016, XB8-2018, XB8-TQ - 2006, XB808 - 2011, XB8 - 2017, XRAY
New ultra-efficient brake pads from special slip-free material. Set of 4.
In stock
+ −
Add to wish list Add to comparison list
BUMPER/ ROLL BAR SET
11.99 €
WHEEL KING, HPI
Genuine HPI quality spare part for easy maintenance and repairs. Also contains body mount extensions to mount higher bodyshells like the #7165 Hummer.
In stock
+ −
Add to wish list Add to comparison list
Carbon Rear Shock Tower 4mm - S10 Twister BX
32.90 €
TWISTER S10, LRP
Carbon Rear Shock Tower 4mm - S10 Twister BX
In stock
+ −
Add to wish list Add to comparison list
Center Differential Case - V2 - Graphite
21.99 €
XB8, XRAY
Large volume rubber-sealed CENTER differential case made from new specially-formulated graphite composite material. Lighter, tougher material with higher...
In stock
+ −
Add to wish list Add to comparison list
CENTRAL CVD SHAFT UNIVERSAL JOINT - HUDY SPRING STEEL™
27.99 €
XB8E - 2017, XB8 - 2014, XB9 - 2013, XB8-2019, XB8 - 2015, XT8 - 2017, XT9 - 2013, XB8 - 2016, XB9E - 2013, XB9 - 2012, XB8-2018, XB8E - 2015, XB8 - 2017, XB8E - 2016, GTX - 2017, XRAY
Central CVD shaft universal joint made from world-renown HUDY Spring Steel™. Strategically machined for toughness and light weight without compromising...
In stock
+ −
Add to wish list Add to comparison list
CERAMIC MOTOR BEARING FOR 540 SIZE (2PCS)
9.90 €
In stock
+ −
Add to wish list Add to comparison list
CLOSED BALL JOINT 3.9 (4)
4.90 €
XB9 - 2012, XT8 - 2007, XB8 - 2005, XT9 - 2013, XT8 - 2017, XB8-2018, XB8 - 2014, XT8 - 2009, XB8-2019, XB8 - 2015, XB8R, XB8-EC - 2007, XB8 - 2016, XB808 - 2009, XB8-TQ - 2006, XB8 - 2017, XB808 - 2010, XB808 - 2008, XB9 - 2013, XB808 - 2011, XRAY
Molded composite ball joint for 3.9mm ball. Set of 4.
In stock
+ −
Add to wish list Add to comparison list
CLUTCH BELL 13T - LIGHTWEIGHT
35.70 €
XB8 - 2005, XB8-TQ - 2006, XB8R, XT9 - 2013, XB8-EC - 2007, XB808E - 2010, XT8 - 2017, XB8 - 2017, XB808 - 2011, XT8 - 2009, XB8 - 2016, XB808 - 2010, XT8 - 2007, XB8 - 2015, XB808 - 2009, XB9 - 2013, XB8 - 2014, XB808 - 2008, XB9 - 2012, XRAY
13-tooth clutch bell made from HUDY steel. Precision machined on a special gear machine, strategically lightened without sacrificing strength or durability.
In stock
+ −
Add to wish list Add to comparison list
CLUTCH BELL BUSHING - HUDY SPRING STEEL™
8.99 €
RX8 - 2017, NT1 - 2011, NT1 EC - 2009, NT1 - 2012, NT1 - 2007, NT1 PRO - 2012, NT1 - 2013, RX8 - 2016, NT1 WE - 2010, NT1 - 2014, RX8 - 2013, NT1R - 2010, NT1 - 2015, NT1 - 2009, RX8 - 2011, NT1 - 2016, NT1 - 2010, RX8 - 2012, NT1 - 2017, XRAY
CLUTCH BELL BUSHING - HUDY SPRING STEEL™
In stock
+ −
Add to wish list Add to comparison list
CLUTCH FLYWEIGHT SET - HIGH DYNAMIC
13.60 €
NT1 - 2017, NT1 - 2007, NT1 PRO - 2012, NT1 - 2016, NT1 WE - 2010, NT1 EC - 2009, NT1R - 2010, NT1 - 2009, NT1 - 2015, NT1 - 2010, NT1 - 2013, NT1 - 2011, NT1 - 2014, NT1 - 2012, XRAY
High-dynamic clutch flyweights with reinforced design are bigger and stronger for longer lifespan, increased resistance to breakage under extreme...
In stock
+ −
Add to wish list Add to comparison list
CLUTCH FLYWEIGHT SET - V2
14.90 €
NT1 - 2016, NT1 - 2013, NT1 WE - 2010, NT1 - 2014, NT1 - 2007, NT1 EC - 2009, NT1R - 2010, NT1 - 2009, NT1 - 2015, NT1 - 2010, NT1 PRO - 2012, NT1 - 2011, NT1 - 2017, NT1 - 2012, XRAY
CLUTCH FLYWEIGHT SET - V2
In stock
+ −
Add to wish list Add to comparison list
CLUTCH SPRING
7.80 €
R10, HPI, NT1
CLUTCH SPRING
In stock
+ −
Add to wish list Add to comparison list
COMPOSITE 2-SPEED GEAR 46T (2nd) - H
13.99 €
RX8 - 2011, GTX - 2017, RX8 - 2012, RX8 - 2013, RX8 - 2014, XRAY
XRAY precision-molded 47T spur gear (2nd gear) made from special composite material with optimal balance of hardness, toughness, and flexibility. Gives long...
In stock
+ −
Add to wish list Add to comparison list
COMPOSITE 2-SPEED GEAR 49T (1st)
13.99 €
RX8 - 2011, GTX - 2017, RX8 - 2013, RX8 - 2012, RX8 - 2014, XRAY
XRAY precision-molded 49T spur gear (1st gear) made from special composite material with optimal balance of hardness, toughness, and flexibility. Gives long...
In stock
+ −
Add to wish list Add to comparison list
COMPOSITE ANTI-ROLL BAR BALL JOINT 4.9 MM (4)
9.99 €
T4 - 2016, T4 - 2017, T4 - 2018, T4 - 2015, XT2 - 2017, XRAY
COMPOSITE ANTI-ROLL BAR BALL JOINT 4.9 MM (4)
In stock
+ −
Add to wish list Add to comparison list
Composite Ball Cup 13.9mm - Graphite (2)
7.90 €
XB8E - 2017, XB8-2019, XB8-2018, XRAY
Molded composite ball cup for cushioning alu M15 alu adjusting nut against 13.9mm pivot ball. To increase the reliability and free movement of suspension...
In stock
+ −
Add to wish list Add to comparison list
Composite Fixed Pulley for Layshaft with Bearings 20T
9.99 €
T4 2020, XRAY
Composite Fixed Pulley for Layshaft with Bearings 20T
In stock
+ −
Add to wish list Add to comparison list
COMPOSITE GEAR DIFFERENTIAL CASE WITH PULLEY 53T
11.99 €
XT2 - 2017, XB2 Dirt - 2016, XB2 Carpet - 2018, XB2 Carpet - 2017, XB2 Dirt - 2017, XB2 Carpet - 2016
COMPOSITE GEAR DIFFERENTIAL CASE WITH PULLEY 53T
In stock
+ −
Add to wish list Add to comparison list
COMPOSITE REAR UPPER CAMBER LINK BALL JOINT 5.8 MM (4)
9.99 €
NT1 - 2012, NT1 - 2017, RX8 - 2017, NT1 - 2013, NT1 EC - 2009, NT1 WE - 2010, NT1 - 2014, NT1 - 2009, NT1R - 2010, NT1 PRO - 2012, NT1 - 2007, RX8 - 2016, NT1 - 2010, NT1 - 2015, NT1 - 2011, NT1 - 2016, XRAY
COMPOSITE REAR UPPER CAMBER LINK BALL JOINT 5.8 MM (4)
In stock
+ −
Add to wish list Add to comparison list
COMPOSITE SHOCK PARTS
11.99 €
GTX - 2017, XB9E - 2013, XT9 - 2013, XB8 - 2014, XB8E - 2016, XT8 - 2017, XB8 - 2015, XB8E - 2017, XB8 - 2017, XB9 - 2012, XB8-2018, XB9 - 2013, XB8E - 2015, XB8 - 2016, XB8-2019, XRAY
Set of composite molded parts for 2 shock absorbers, includes spring lower collar and ball joints. Big-bore 16mm pistons are manufactured from...
In stock
+ −
Add to wish list Add to comparison list
COMPOSITE SQUARE ADJ. ROLL-CENTER BUSHINGS - V2 (2)
11.90 €
XT8 - 2017, XB808 - 2011, XB8 - 2017, XT9 - 2013, XB808 - 2009, XB808E - 2010, XB8-2018, XB808 - 2010, XB8E - 2015, XB8-2019, GTX - 2017, XB8E - 2016, XB808 - 2008, XB8 - 2014, XB8E - 2017, XB9E - 2013, XB8 - 2015, XB9 - 2012, XB9 - 2013, XB8 - 2016, XRAY
Eccentric bushings for adjusting suspension settings, made from tough composite. Fits XB808 alu suspension holders - square adj. roll-centers. Set of 2.
In stock
+ −
Add to wish list Add to comparison list
COMPOSITE STEERING BLOCK 1° KINGPIN FOR AERO DISC - LEFT
9.99 €
NT1 - 2014, NT1 - 2013, NT1 PRO - 2012, NT1 WE - 2010, NT1 - 2007, NT1 EC - 2009, NT1 - 2015, NT1 - 2009, NT1R - 2010, NT1 - 2010, NT1 - 2016, NT1 - 2011, NT1 - 2017, NT1 - 2012, XRAY
LEFT-side steering block with integrated 1° kingpin for improved in-corner steering. Redesigned for use with graphite Ackermann plate, accommodates optional...
In stock
+ −
Add to wish list Add to comparison list
COMPOSITE STEERING SERVO HOLDER - SET - V2
14.99 €
XB9 - 2013, NT1 PRO - 2012, XB9 - 2012, NT1 - 2013, XB808 - 2011, GTX - 2017, NT1 WE - 2010, RX8 - 2016, NT1 - 2014, RX8 - 2017, NT1 - 2007, NT1R - 2010, RX8 - 2014, NT1 - 2015, XB8 - 2014, NT1 - 2009, RX8 - 2011, XT8 - 2017, NT1 - 2016, XB8 - 2015, NT1 - 2010, RX8 - 2012, XT9 - 2013, NT1 - 2017, XB8 - 2016, NT1 - 2011, RX8 - 2013, NT1 EC - 2009, XB8 - 2017, NT1 - 2012, XRAY
Molded composite steering servo holding set includes all mounting brackets and shims for most servo brands.
Out of stock
Out of stock Add to wish list Add to comparison list
CORERC CR4829 Pinion Gear 48DP 29T (7075 Hard)
7.99 €
CORE-RC, 48, 29
Precision lightweight aluminium, hard coated for long life Core RC pinion. Eteched with teeth number for easy identification.
In stock
+ −
Add to wish list Add to comparison list
CORERC CR4817 Pinion Gear 48DP 17T (7075 Hard)
7.99 €
CORE-RC, 48, 17
Precision lightweight aluminium, hard coated for long life Core RC pinion. Eteched with teeth number for easy identification.
In stock
+ −
Add to wish list Add to comparison list
CORERC CR6419 Pinion Gear 64DP 19T (7075 Hard)
7.99 €
CORE-RC, 64, 19
Precision lightweight aluminium, hard coated for long life Core RC pinion. Eteched with teeth number for easy identification.
In stock
+ −
Add to wish list Add to comparison list
CORERC CR6426 Pinion Gear 64DP 26T (7075 Hard)
7.90 €
CORE-RC, 64, 26
Precision lightweight aluminium, hard coated for long life Core RC pinion. Eteched with teeth number for easy identification.
In stock
+ −
Add to wish list Add to comparison list
CVD Adjustable Drive Axle - HUDY Spring Steel™ (2)
39.90 €
XB8, XRAY
Drive axle for XRAY adjustable drive shafts. Drive shaft length adjustment uses 4 different connecting hole positions at the drive axle end to allow changes...
In stock
+ −
Add to wish list Add to comparison list
CVD DRIVE SHAFT COUPLING - HUDY SPRING STEEL™
9.99 €
XB9 - 2013, XB8-2019, XB9 - 2012, XB9E - 2013, XB8E - 2015, XB808 - 2008, XB808 - 2009, GTX - 2017, XB808 - 2010, XB8 - 2014, XB808 - 2011, XB8 - 2015, XB808E - 2010, XB8-2018, XRAY
CVD drive shaft coupling for CVD drive shafts made from world-renown Hudy Spring Steel™. Specially hand-ground for maximum precision.
In stock
+ −
Add to wish list Add to comparison list
Differential Case - V2 - Graphite
21.99 €
XB8-2019, XB8-2018, XB8, XRAY
Rubber-sealed differential case made from new specially-formulated graphite composite material. Lighter, tougher material with higher temperature and wear...
In stock
+ −
Add to wish list Add to comparison list
Dogbones (2pcs) - S10 Twister MT/TX
14.40 €
LRP
Dogbones (2pcs) - S10 Twister MT/TX
In stock
+ −
Add to wish list Add to comparison list
Duratrax DTXC2614 Nylon Body Post 100mm (Black, 2pcs)
9.99 €
Features: Made of a Black Nylon Material Adjustable Height Collars (1/4" inside diameter) Secured With A Single Set Screws Great...
In stock
+ −
Add to wish list Add to comparison list
Duratrax DTXC2617 Nylon Body Post 90mm (Black, 2pcs)
9.99 €
Features: Made of a Black Nylon Material Adjustable Height Collars (1/4" inside diameter) Secured With A Single Set Screws Great...
In stock
+ −
Add to wish list Add to comparison list
Duratrax DTXC2618 Nylon Body Post 115mm (Black, 2pcs)
9.99 €
Features: Made of a Black Nylon Material Adjustable Height Collars (1/4" inside diameter) Secured With A Single Set Screws Great...
In stock
+ −
Add to wish list Add to comparison list
E-CLIPS E2MM (20 PCS)
4.99 €
HPI
E CLIP E2mm (20pcs)
In stock
+ −
Add to wish list Add to comparison list
EAGLE RACING PINION 20T 64P
5.90 €
EAGLE RACING, 64, 20
EAGLE RACING PINION 20T 64P
In stock
+ −
Add to wish list Add to comparison list
EAGLE RACING PINION 22T 64P
5.90 €
EAGLE RACING, 64, 22
EAGLE RACING PINION 22T 64P
In stock
+ −
Add to wish list Add to comparison list
EDIT FIRESTORM ALLOY REAR HUBS (PAIR)
17.90 €
FIRESTORM, EDIT
EDIT FIRESTORM ALLOY REAR HUBS (PAIR)
In stock
+ −
Add to wish list Add to comparison list
EXHAUST HEADER SET
11.90 €
NITRO MONSTER KING, HPI
NITRO MONSTER KING Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.
In stock
+ −
Add to wish list Add to comparison list
EXHAUST WIRE MOUNT SET - LONG
8.90 €
XT8 - 2009, XB808 - 2010, XT8 - 2007, XB8-2019, XB8-EC - 2007, XB8 - 2005, XB8-TQ - 2006, XB8-2018, XB808 - 2008, XB808 - 2009, XB8R, XRAY
Exhaust wire mounting set for XT8 includes mounting wire and post, composite support, and all necessary hardware.
In stock
+ −
Add to wish list Add to comparison list
Extreme Heat Resistant Center Diff Pin with Inserts (2+4)
29.70 €
XB8, XB8 - 2017, XB8-2018, XB8-2019, XRAY
Precision-ground polished steel pin 3.5 x 33 mm for internal satellite gears used in large center differential #355013. Mounted in steel inserts instead of...
In stock
+ −
Add to wish list Add to comparison list
F/R DIFF GASKET (4)
9.99 €
XT8 - 2017, XB8E - 2017, XB8 - 2017, XB8-2018, XB8-2019, XRAY
Sealing gasket for front & rear differential housings. Fits #355004 and #355005. Set of 4.
In stock
+ −
Add to wish list Add to comparison list
FRONT CASTOR BLOCK 2PCS (ALL ION)
7.99 €
ION, MAVERICK
In stock
+ −
Add to wish list Add to comparison list
 Prev
1 2 3 4 5 6 7 8
Next  2 - 16